SCULPFUN S9 PRO Laser Engraver Instruction Manual

مقدمة

This manual provides essential information for the safe and efficient operation of your SCULPFUN S9 PRO 10W Laser Engraver. The S9 PRO features 10W laser beam shaping technology, offering a 0.06mm ultra-fine laser focus for strong cutting penetration and precision. It is capable of cutting materials such as 15mm thick wood and 10mm acrylic, and engraving ceramics and stainless steel. Please read this manual thoroughly before use to ensure proper setup, operation, and maintenance.

معلومات السلامة

Operating a laser engraver involves potential hazards. Adhere to all safety guidelines to prevent injury or damage.

• حماية العين: Always wear appropriate laser safety glasses when operating the machine. The integrated laser filter on the S9 PRO blocks 98% of ultraviolet light, allowing observation without additional safety glasses for bystanders, but direct laser exposure should always be avoided.
• مفتاح التشغيل: The machine is equipped with a secure power switch. Always turn off the machine when not in use or during maintenance.
• التنسيب الآمن: Utilize the fastening holes on the four feet and frame structure to secure the machine and data cables, preventing accidental movement.
• حماية السطح: Use the provided A4-sized steel pad to protect your work surface from laser damage.
• تهوية: Ensure adequate ventilation in your workspace to dissipate fumes produced during engraving and cutting.
• المواد القابلة للاشتعال: Do not engrave or cut highly flammable materials without proper precautions.
• الأطفال والحيوانات الأليفة: Keep children and pets away from the operating area. The laser point can attract attention, but direct exposure is dangerous.

محتويات الحزمة

تأكد من وجود جميع المكونات عند فك العبوة:

• 1 x SCULPFUN S9 Pro 10 W Laser Engraver
• A4-sized steel pad
• محول الطاقة
• كابل يو اس بي
• أدوات التجميع
• دليل المستخدم (هذا المستند)

دليل الإعداد

1. التجميع

The SCULPFUN S9 PRO features a fast assembly design, allowing for installation typically within 10 to 20 minutes. Follow the steps below:

1. الخطوة 1: Assemble the main frame components.
2. الخطوة 2: Attach the X-axis and laser module to the frame.
3. الخطوة 3: قم بتوصيل جميع الكابلات اللازمة.
4. ينهي: Ensure all connections are secure and the frame is stable.

The full-metal structure enhances robustness and engraving accuracy. The X and Y axes include precise scale lines, forming a rectangular measuring ruler for quick object sizing.

2. ضبط التركيز

The S9 PRO features a quick fixed-focus design. The laser combines a fixed-focus lens with a sliding design for easy adjustment.

1. Place the laser module over your material.
2. Move the laser module up or down until the focus is achieved.
3. Tighten the screws to secure the laser module in place.

تعليمات التشغيل

1. توافق البرامج

The SCULPFUN S9 PRO is compatible with various advanced engraving software:

• LaserGRBL (Windows)
• LightBurn (Windows, macOS, Linux)
• بينبوكس
• وحدة تحكم Grbl
• لايت فاير

It supports engraving in PWM mode and various file formats including JPG, PNG, DXF, SVG, AI, G-code, NC, and BMP.

2. Material Capabilities

The 10W laser module provides strong cutting and engraving capabilities across a wide range of materials:

• القطع: Up to 15mm thick wood, 10mm black acrylic.
• نقش: Wood, leather, ceramics, stainless steel, aluminum oxide, PCB board, paper, cardboard, dark stone, and more.

3. General Operation Workflow

1. تصميم: Create or import your design using compatible software (e.g., LightBurn, LaserGRBL).
2. وضع المواد: Place your material on the work surface, ensuring it is flat and secure. Use the integrated rulers for precise positioning.
3. ضبط التركيز: Adjust the laser focus as described in the Setup section.
4. إعدادات البرنامج: Configure laser power, speed, and passes in your chosen software according to the material and desired effect. Refer to software documentation for detailed settings.
5. بدء العملية: ابدأ عملية النقش أو القطع من خلال البرنامج. راقب الجهاز أثناء التشغيل.
6. انتهاء: Once the process is complete, turn off the machine and carefully remove your finished piece.

صيانة

Regular maintenance ensures optimal performance and extends the lifespan of your SCULPFUN S9 PRO.

• تنظيف عدسة الليزر: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain laser precision.
• تنظيف منطقة العمل: Remove debris and dust from the engraving area after each use to prevent interference with machine movement.
• فحص الأحزمة والسكك الحديدية: Check the drive belts for tension and wear. Keep the guide rails clean and lubricated if necessary to ensure smooth movement of the laser module.
• تحديثات البرامج الثابتة: Check the official SCULPFUN website for any available firmware updates to ensure your machine has the latest features and improvements.

استكشاف الأخطاء وإصلاحها

يتناول هذا القسم المشكلات الشائعة التي قد تواجهها.

• الليزر لا يعمل:
  • تأكد من توصيل كابل الطاقة بشكل آمن وتأكد من تشغيل مفتاح الطاقة.
  • Verify that the USB cable is connected to your computer and the machine.
  • Ensure the software is correctly configured and sending commands.
  • Check the laser module connection.
• جودة النقش/القطع رديئة:
  • Re-check the laser focus. An incorrect focus is a common cause of poor quality.
  • Adjust laser power and speed settings in your software. Different materials require different settings.
  • تأكد من أن المادة مسطحة ومثبتة بإحكام.
  • قم بتنظيف عدسة الليزر إذا كانت تبدو متسخة.
• Machine Not Moving Correctly:
  • Check for any obstructions on the rails or belts.
  • Ensure belts are properly tensioned and not slipping.
  • Verify that all cables are securely connected.
  • أعد تشغيل البرنامج والجهاز.
• مشاكل الاتصال بالبرامج:
  • Ensure the correct COM port is selected in your software.
  • Try restarting your computer and the engraver.
  • Reinstall the software or drivers if necessary.

For persistent issues, refer to the SCULPFUN support webالموقع أو الاتصال بخدمة العملاء.

تحديد

الضمان والدعم

For warranty information, technical support, or service inquiries, please contact SCULPFUN customer support through their official webالموقع أو المتجر الذي اشتريت منه المنتج. احتفظ بإيصال الشراء كإثبات للشراء.

الشركة المصنعة: سكالبفن

أول تاريخ متاح: 29 نوفمبر 2024