HyperMotion CITY SWIFT 2 HYP15W

HyperMotion CITY SWIFT 2 HYP15W Adult Folding Scooter Instruction Manual

Model: CITY SWIFT 2 HYP15W | Brand: HyperMotion

1. معلومات السلامة

Please read this manual carefully before using the HyperMotion CITY SWIFT 2 HYP15W scooter. Failure to follow these instructions may result in serious injury or damage to the product.

  • قم دائمًا بارتداء معدات السلامة المناسبة، بما في ذلك الخوذة، ومنصات الركبة، ومنصات الكوع.
  • تأكد من كل clamps, bolts, and quick-release mechanisms are securely fastened before each ride.
  • لا تركب في ظروف رطبة، أو على أسطح غير مستوية، أو في الليل بدون إضاءة مناسبة.
  • مراعاة جميع قوانين وأنظمة المرور المحلية.
  • Maximum weight capacity is 100 kg. Do not exceed this limit.
  • Recommended for users aged 6 years and older. Adult supervision is advised for younger riders.
  • Avoid sudden braking, especially at high speeds, to prevent loss of control.
  • Regularly inspect the scooter for wear and tear, especially on wheels, bearings, and brake components.

2. انتهى المنتجview

The HyperMotion CITY SWIFT 2 HYP15W is a durable and convenient folding scooter designed for urban transport and leisure. It features a robust steel frame, large 200mm wheels for a smooth ride, and an adjustable handlebar to suit various rider heights.

HyperMotion CITY SWIFT 2 HYP15W scooter in white with a fox graphic on the deck, shown from the side.

الصورة 2.1: انتهىview of the HyperMotion CITY SWIFT 2 HYP15W scooter.

المميزات الرئيسية:

  • مقود قابل للتعديل: ارتفاع قابل للتعديل من 85 سم إلى 95 سم.
  • عجلات كبيرة: 200 mm PU (polyurethane) wheels for smooth gliding.
  • Front Shock Absorption: Enhances comfort on uneven surfaces.
  • تصميم للطي: Quick folding mechanism for easy transport and storage.
  • Anti-slip Deck: Provides secure footing during use.
  • فرامل القدم الخلفية: Steel rear brake for reliable stopping power.
  • بناء متين: Steel frame with carbon steel bearing bushings.

3. الإعداد

Your HyperMotion CITY SWIFT 2 HYP15W scooter comes partially assembled. Follow these steps to prepare it for use:

3.1 فتح السكوتر

  1. ضع السكوتر على سطح مستوٍ وثابت.
  2. Locate the folding mechanism lever near the front wheel.
  3. Pull the lever to release the folding lock.
  4. Carefully unfold the handlebar stem upwards until it clicks securely into place. Ensure the locking mechanism is fully engaged.
Diagram showing the HyperMotion scooter unfolding from a compact position to an upright position.

Image 3.1: Illustration of the scooter's folding and unfolding mechanism.

3.2 Attaching Handlebar Grips

The handlebar grips may be detached for compact storage. To attach them:

  1. Slide each grip onto the ends of the handlebar until fully seated.
  2. Ensure the grips are firmly in place and do not rotate freely.
Close-up of the HyperMotion scooter's handlebar showing how the grips attach and detach.

Image 3.2: Detail of handlebar grip attachment.

3.3 ضبط ارتفاع المقود

Adjust the handlebar to a comfortable height for the rider, typically around hip level.

  1. افتح ملف clamp على ساق المقود.
  2. Raise or lower the handlebar to the desired height (between 85 cm and 95 cm).
  3. Ensure the handlebar is aligned straight with the front wheel.
  4. أغلق الإصدار السريع clamp firmly to secure the handlebar in position. Check for any wobble.
HyperMotion scooter with arrows indicating adjustable handlebar heights at 85 cm, 90 cm, and 95 cm.

Image 3.3: Handlebar height adjustment points.

4. تعليمات التشغيل

4.1 ركوب السكوتر

  1. ضع إحدى قدميك بثبات على السطح المانع للانزلاق.
  2. استخدم القدم الأخرى للدفع عن الأرض، واكتسب زخماً.
  3. Once moving, place both feet on the deck, one behind the other, or side-by-side if comfortable.
  4. Steer by gently leaning and turning the handlebar.

4.2 الكبح

To slow down or stop, gently press your foot down on the rear fender brake. Apply gradual pressure to avoid sudden stops.

Close-up of the HyperMotion scooter's front wheel and suspension system.

Image 4.1: Front wheel and suspension detail, contributing to a smooth ride.

4.3 Folding for Transport/Storage

To fold the scooter for easy transport or storage:

  1. تأكد من أن السكوتر ثابت وعلى سطح مستوٍ.
  2. If desired, remove the handlebar grips for a more compact fold.
  3. افتح ملف clamp on the handlebar stem and lower the handlebar to its lowest position, then re-secure the clamp.
  4. Locate and pull the folding mechanism lever to release the stem.
  5. Fold the handlebar stem downwards until it locks into the folded position.
HyperMotion scooter shown in its folded, compact state, ready for transport or storage.

Image 4.2: The scooter in its folded configuration.

5. الصيانة

ستساهم الصيانة الدورية في إطالة عمر دراجتك النارية وضمان تشغيلها الآمن.

  • تنظيف: امسح السكوتر بالإعلانamp cloth after use. Avoid using harsh chemicals or abrasive cleaners. Do not hose down the scooter.
  • تشحيم: Periodically apply a small amount of lubricant to moving parts such as the folding mechanism and wheel axles.
  • Wheel and Bearing Inspection: Check wheels for wear and tear. Ensure bearings spin freely and are free from dirt and debris. Replace worn wheels or damaged bearings promptly.
  • فحص الفرامل: Ensure the rear brake functions effectively. Adjust or replace if braking performance is reduced.
  • فحص المثبتات: Regularly check all bolts, nuts, and clamps to ensure they are tight and secure. Use the provided Allen key for adjustments.
  • تخزين: قم بتخزين السكوتر في مكان جاف، بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى.

6. استكشاف الأخطاء وإصلاحها

مشكلة السبب المحتمل حل
اهتزاز المقود تحرير سريع clamp هو فضفاض. تشديد cl سريع التحريرamp. Ensure it is fully engaged.
Scooter does not fold/unfold smoothly Folding mechanism is stiff or dirty. Clean and lubricate the folding mechanism.
الفرامل غير فعالة Brake pad worn or mechanism dirty. Inspect the brake pad for wear. Clean the brake mechanism. If worn, replace the brake pad.
Wheels are noisy or do not spin freely المحامل متسخة أو تالفة. Clean the bearings. If noise persists or wheels are stiff, replace the bearings.

7. المواصفات

Icons representing key specifications: Grip, ABEC 7 bearings, 200 mm wheel size, 4.35 kg weight, 100 kg max load.

Image 7.1: Visual summary of key product specifications.

ميزة التفاصيل
اسم الموديل CITY SWIFT 2 HYP15W
ماركة هايبر موشن
مادة العجلة البولي يوريثين (PU)
حجم العجلة 200 ملم
المحامل ABEC-7 class
ارتفاع المقود قابل للتعديل 85-95 سم
الحد الأقصى للحمل 100 كجم
مادة الإطار سبائك الفولاذ
وزن العنصر 5 كجم
نوع الفرامل فرامل قدم خلفية
المميزات الخاصة Front shock absorption, folding design, anti-slip deck
العمر الموصى به 6+ years, teenagers, and adults

8. الضمان والدعم

The HyperMotion CITY SWIFT 2 HYP15W scooter comes with a ضمان ممتد لمدة 2 سنوات يسري هذا الضمان من تاريخ الشراء. ويغطي عيوب التصنيع والأعطال المادية في ظل ظروف الاستخدام العادية.

الضمان لا يشمل:

  • الأضرار الناجمة عن سوء الاستخدام أو الإهمال أو الحوادث.
  • Normal wear and tear of components such as wheels, bearings, and brake pads.
  • التعديلات أو الإصلاحات التي يقوم بها أفراد غير مصرح لهم.

For warranty claims or technical support, please contact HyperMotion customer service through your retailer or the official HyperMotion website. Please have your proof of purchase and model information ready.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.