دليل التعليمات

المنتج انتهىview

This manual provides essential information for the installation, operation, and maintenance of the Generic Honda CB190R Motorcycle Rear Wheel. This component is designed for specific Honda CB190R models manufactured between 2020 and 2024, with part number 42650-k70-630ZA. It is crucial to ensure compatibility with your motorcycle model year before proceeding with installation.

Figure 1: Orange Honda CB190R Motorcycle Rear Wheel. This image displays the complete rear wheel assembly, highlighting its orange finish and spoke design, ready for installation.

معلومات السلامة

Always prioritize safety when working with motorcycle components. Read all instructions thoroughly before beginning any procedure. Wear appropriate personal protective equipment (PPE), including safety glasses and gloves. If you are unsure about any step, consult a qualified motorcycle mechanic.

• Ensure the motorcycle is stable and securely supported before removing or installing the wheel.
• Use only appropriate tools for all procedures.
• Do not overtighten or undertighten fasteners; refer to torque specifications.
• احتفظ بالأطفال والحيوانات الأليفة بعيدًا عن منطقة العمل.

الإعداد والتثبيت

Proper installation is critical for safe operation. This section outlines the general steps for replacing the rear wheel. Refer to your motorcycle's official service manual for specific torque values and detailed procedures.

الأدوات المطلوبة:

• حامل أو رافعة للدراجات النارية
• مجموعة وجع المقبس
• مفتاح عزم الدوران
• Axle nut wrench
• Chain adjustment tools (if applicable)
• شحم

خطوات التثبيت:

1. تحضير الدراجة النارية: Place the motorcycle on a stable stand, ensuring the rear wheel is off the ground.
2. إزالة العجلة القديمة:
   • Loosen the axle nut.
   • Remove any chain adjusters or brake caliper mounts as necessary.
   • Slide the axle out.
   • Carefully remove the old wheel, noting the position of spacers and chain.
3. فحص المكونات: Before installing the new wheel, inspect the brake rotor, sprocket, and wheel bearings for any damage or wear. Replace components as needed.
4. تثبيت العجلة الجديدة:
   • Apply a thin layer of grease to the axle.
   • Carefully position the new wheel, ensuring the brake rotor aligns with the caliper and the sprocket aligns with the chain.
   • Insert the axle through the swingarm and wheel.
   • Reinstall any spacers, chain adjusters, and brake caliper mounts.
5. شد صامولة المحور: Hand-tighten the axle nut, then use a torque wrench to tighten it to the manufacturer's specified torque value. Refer to your Honda CB190R service manual for the exact specification.
6. ضبط شد السلسلة: Adjust the chain tension according to your motorcycle's specifications.
7. Check Brake Function: Pump the rear brake lever several times to ensure proper brake function before riding.

الشكل 2: خلفي view of the orange motorcycle wheel, showing the sprocket mounting area and brake rotor attachment points. This perspective is useful for understanding component alignment during installation.

اعتبارات التشغيل

Once installed, the rear wheel operates as an integral part of your motorcycle's drivetrain and suspension system. No specific "operating" instructions are required for the wheel itself beyond ensuring proper installation and regular maintenance.

• Always ensure tire pressure is maintained at the manufacturer's recommended levels.
• Regularly check for any unusual noises or vibrations from the rear wheel area.
• Avoid riding with damaged or improperly installed wheels.

صيانة

Regular maintenance extends the life of your rear wheel and ensures safe riding.

الفحوصات الروتينية:

• ضغط الإطارات: تحقق من ضغط الإطارات قبل كل رحلة.
• محامل العجلات: Periodically check for play in the wheel bearings. Lift the rear wheel off the ground and try to move it side-to-side. Any significant play indicates worn bearings that require replacement.
• Spokes/Rim: Inspect the rim for dents or cracks and spokes (if applicable) for looseness or damage.
• Brake Rotor: Check the brake rotor for excessive wear, warping, or cracks.
• ضرس: Inspect the rear sprocket for worn or hooked teeth.
• نظافة: Keep the wheel clean to prevent dirt and grime buildup, which can hide damage or accelerate wear.

تعليمات التنظيف:

Clean the wheel using mild soap and water. Avoid harsh chemicals or abrasive cleaners that could damage the finish. Rinse thoroughly and dry with a soft cloth.

استكشاف الأخطاء وإصلاحها

This section addresses common issues related to the rear wheel.

If troubleshooting steps do not resolve the issue, consult a certified motorcycle mechanic.

تحديد

الضمان والدعم

Specific warranty information for this product is not provided in the available data. Please refer to the seller's return policy or contact the seller directly for details regarding warranty coverage and support.

For technical assistance or further inquiries, it is recommended to contact the seller, JXLshop, or a qualified motorcycle service center.

• بائع: JXLshop