COUGAR FV150 RGB Gaming Case Mid Tower User Manual

1. انتهى المنتجview

The COUGAR FV150 RGB is a mid-tower gaming case designed for high-performance PC builds. It features a dual-chamber design, separating the main components from cables, storage drives, and the power supply unit (PSU) for a clean aesthetic and improved airflow. The case supports various motherboard form factors and offers extensive cooling options, including pre-installed ARGB fans.

المميزات الرئيسية:

• تصميم ذو غرفتين: يوفر صورة واضحة view of your build through glass panels while concealing cables and other components.
• دعم وحدة معالجة الرسومات: Accommodates graphics cards up to 400mm in length, with options for vertical GPU orientation.
• توافق اللوحة الأم: Supports Mini-ITX, Micro-ATX, and ATX motherboards.
• دعامة مروحة سفلية مصممة هندسيًا: Simplifies fan installation by allowing attachment prior to setup.
• Extensive Fan & Water Cooling Support: Multiple fan mounting points and radiator support up to 360mm.
• مزامنة سلسة لألوان RGB: Integrated universal fan hub for easy ARGB lighting control.
• لوحة إدخال/إخراج حديثة: Includes 2 x USB Type-A and 1 x USB 3.2 Type-C ports.
• تخزين مرن: Supports combinations of 3.5" HDDs and 2.5" SSDs.
• مرشحات الغبار المغناطيسية: Located on the top and right side for easy maintenance.

الصورة 1.1: بزاوية view of the COUGAR FV150 RGB case, highlighting its dual-chamber design and pre-installed ARGB fans.

2. الإعداد والتثبيت

Follow these steps for proper installation of your PC components into the COUGAR FV150 RGB case.

2.1 فك العبوة والفحص الأولي

• قم بإزالة العلبة من عبوتها بعناية.
• افحص الحقيبة بحثًا عن أي علامات تلف أثناء النقل.
• Remove the tempered glass side panel by unscrewing the thumb screws, if present, or by releasinز- آلية المزلاج.

2.2 تركيب اللوحة الأم

• Ensure the correct standoffs are installed for your motherboard form factor (Mini-ITX, Micro-ATX, or ATX).
• Place the I/O shield into the rear opening of the case.
• قم بمحاذاة اللوحة الأم بعناية مع الدعامات ودرع الإدخال/الإخراج، ثم قم بتثبيتها بالمسامير.

2.3 تركيب وحدة إمداد الطاقة (PSU)

• The FV150 RGB supports bottom-mount PSUs.
• Slide the PSU into its designated compartment in the secondary chamber from the rear of the case.
• Secure the PSU with screws from the exterior rear of the case.

2.4 تركيب محرك التخزين

• Locate the drive bays in the secondary chamber.
• For 3.5" HDDs, slide the drive into the appropriate tray and secure it.
• For 2.5" SSDs, mount them to the designated brackets or trays.

2.5 تثبيت بطاقة الرسومات (GPU)

• قم بإزالة أغطية فتحات التوسعة اللازمة الموجودة في الجزء الخلفي من العلبة.
• Insert your GPU into the PCIe slot on the motherboard and secure it with screws.
• The case supports GPUs up to 400mm. For vertical GPU mounting, a separate riser cable and bracket (not included) are required.

الصورة 2.1: داخلي view illustrating the main chamber for motherboard and GPU installation, with pre-installed side fans.

2.6 تركيب المروحة والرادياتير

• The case comes with 3 x 120mm ARGB side fans and 1 x 120mm ARGB rear fan pre-installed.
• Additional fans can be installed at the top (3 x 120mm or 2 x 140mm) and bottom (3 x 120mm or 2 x 140mm).
• Utilize the engineered bottom fan bracket for easier installation of bottom fans.
• For water cooling, radiators up to 360mm can be mounted on the top and 240mm on the side.

Image 2.2: Top internal view, showing potential mounting locations for additional cooling fans or radiators.

2.7 إدارة الكابلات

• Route all power and data cables through the cutouts to the secondary chamber.
• استخدم ample space and tie-down points in the secondary chamber to organize cables for optimal airflow and a clean appearance.

2.8 Connecting Front I/O Panel

• Connect the front panel cables (USB 3.2 Type-C, USB Type-A, audio, power, reset, LED) to the corresponding headers on your motherboard.

3. تعليمات التشغيل

بمجرد تثبيت كافة المكونات وتوصيلها، يمكنك تشغيل نظامك.

3.1 التشغيل

• تأكد من أن مفتاح PSU في وضع التشغيل.
• اضغط على زر الطاقة الموجود على لوحة الإدخال/الإخراج الأمامية للعلبة.

3.2 التحكم في إضاءة RGB

• The integrated universal fan hub allows for easy synchronization of ARGB lighting.
• Connect the hub to your motherboard's ARGB header (5V 3-pin) to control lighting effects via motherboard software.
• Alternatively, use the dedicated RGB button on the front I/O panel to cycle through pre-set lighting modes if not connected to a motherboard header.

4. الصيانة

تساعد الصيانة الدورية على ضمان الأداء الأمثل وطول عمر مكونات جهاز الكمبيوتر الخاص بك.

4.1 تنظيف فلتر الغبار

• The COUGAR FV150 RGB features magnetic dust filters on the top and right side, along with a ventilated bottom cover.
• Gently remove the magnetic dust filters.
• Clean them using compressed air or by rinsing with water (ensure they are completely dry before reattaching).
• Periodically clean the ventilated bottom cover.

4.2 التنظيف العام

• استخدم قطعة قماش ناعمة وجافة لمسح الأسطح الخارجية للعلبة.
• For tempered glass panels, use a glass cleaner and a microfiber cloth to avoid streaks.
• تجنب استخدام المواد الكيميائية القاسية أو المواد الكاشطة التي قد تؤدي إلى إتلاف الطبقة النهائية.

5. استكشاف الأخطاء وإصلاحها

يوفر هذا القسم حلولاً للمشكلات الشائعة التي قد تواجهها.

5.1 النظام لا يعمل

• التحقق من وحدة PSU: Ensure the power supply unit is properly connected to the wall outlet and the PSU switch is in the 'ON' position.
• وصلات اللوحة الأمامية: Verify that the power button cable from the case is correctly connected to the motherboard's front panel header.
• كابلات الطاقة الداخلية: Confirm all necessary power cables (24-pin ATX, 8-pin CPU, PCIe for GPU) are securely connected to the motherboard and components.

5.2 Fans Not Spinning or RGB Not Working

• روابط المعجبين: Ensure all fan power cables are securely connected to the fan hub or motherboard headers.
• توصيلات RGB: Verify the ARGB cables are correctly connected to the fan hub and the hub is connected to a 5V 3-pin ARGB header on the motherboard.
• Software/Button: If connected to the motherboard, check your motherboard's RGB control software. If not, try pressing the RGB button on the case's I/O panel to cycle modes.

5.3 منافذ USB لا تعمل

• منافذ USB الداخلية: Confirm that the USB 3.0 and USB Type-C cables from the front I/O panel are correctly plugged into the corresponding headers on your motherboard.
• برامج تشغيل اللوحة الأم: Ensure you have installed the latest chipset and USB drivers for your motherboard.

6. المواصفات

Detailed technical specifications for the COUGAR FV150 RGB Gaming Case.

Image 6.1: Case dimensions for planning your setup.

7. معلومات الضمان

COUGAR products are manufactured to the highest quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship. The specific duration and terms of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims.

For detailed warranty information, please refer to the official COUGAR webالموقع أو اتصل بالبائع المحلي الخاص بك.

8. الدعم

If you encounter any issues or have questions regarding your COUGAR FV150 RGB Gaming Case that are not covered in this manual, please contact COUGAR customer support.

• Visit the official COUGAR webموقع للأسئلة الشائعة، وتنزيل برامج التشغيل، ومعلومات الاتصال بالدعم.
• Contact your retailer for assistance with product returns or exchanges.