DARKROCK Classico Max Storage Master E-ATX Computer Case Instruction Manual

1. المقدمة

This manual provides detailed instructions for the assembly, operation, and maintenance of your DARKROCK Classico Max Storage Master E-ATX Computer Case. Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance.

2. الميزات الرئيسية

• Extensive Storage Support: Accommodates up to 10x 3.5" HDDs and 3x 2.5" SSDs, providing ampمساحة لتخزين البيانات.
• التركيب الرأسي لوحدة معالجة الرسومات: Features 3 vertical slots for graphics card installation, optimizing airflow and aesthetics.
• توافق اللوحة الأم: Supports E-ATX, ATX, M-ATX, and ITX motherboards. Note: Hard drive cages may need to be removed for E-ATX motherboard installation.
• دعم تبريد متطور: Designed to support up to a 360mm liquid radiator in the top panel for efficient heat dissipation.
• تدفق الهواء الأمثل: Mesh front and side panels, combined with four pre-installed 120mm fans, ensure excellent heat dissipation and maintain low internal temperatures.
• خيارات توصيل اللوحة الأمامية: Includes 2x USB 3.0 ports, 2x USB 2.0 ports, and HD audio jacks for convenient peripheral access.

3. المواصفات

Image: Internal layout showing drive bay locations and case dimensions (18.3"D x 9.06"W x 18.78"H).

Image: Internal clearances for CPU cooler (max 180mm height), GPU (295mm, 400mm if drive bay removed), and motherboard sizes (E-ATX, ATX, M-ATX, ITX).

Image: Diagram illustrating liquid radiator and fan support locations (240/280/360mm liquid radiator, 140mm/120mm fans).

4. دليل الإعداد

4.1. إعداد القضية

1. فتح العلبة: قم بإزالة علبة الكمبيوتر من غلافها بعناية.
2. إزالة الألواح الجانبية: Locate the thumbscrews on the rear of the case. Unscrew them and gently slide off the side panels. Set them aside in a safe place.
3. فحص الملحقات: Verify all included accessories (screws, cable ties, manual) are present.

4.2. تركيب اللوحة الأم

1. تثبيت الفواصل: Ensure the correct motherboard standoffs are installed for your motherboard form factor (E-ATX, ATX, M-ATX, ITX). Additional standoffs may be in the accessory kit.
2. تثبيت I/O Shield: Snap your motherboard's I/O shield into the rear I/O opening of the case.
3. تركيب اللوحة الأم: Carefully align your motherboard with the standoffs and I/O shield. Secure it with the provided screws.
4. E-ATX Note: For E-ATX motherboards, it may be necessary to remove the front hard drive cages to provide sufficient clearance. Refer to the specifications for exact dimensions.

4.3. Drive Installation (HDD/SSD)

• 3.5" HDD Installation: The case supports up to 10x 3.5" HDDs in dedicated drive bays. Slide the HDD into an available bay and secure it with screws.
• 2.5" SSD Installation: The case supports up to 3x 2.5" SSDs. These typically mount behind the motherboard tray or in specific 2.5" drive trays. Secure the SSD with screws.

4.4. تثبيت بطاقة الرسومات (GPU)

• التثبيت القياسي: Insert the GPU into the appropriate PCIe slot on your motherboard and secure it with the retention clip and a screw to the case.
• التثبيت العمودي: The case features 3 vertical expansion slots for vertical GPU mounting. An optional PCIe riser cable (not included) is required for this configuration. Install the riser cable, then mount the GPU vertically and secure it.

4.5. Cooling System Setup

• مراوح مثبتة مسبقًا: The case comes with four 120mm fans pre-installed (three front, one rear). Connect these fans to your motherboard's fan headers or the included 6x 3-pin fan hub (powered via SATA).
• Liquid Radiator Installation: The top panel supports up to a 360mm liquid radiator. Ensure adequate clearance and remove any obstructing components (e.g., top hard drive cage) if necessary.

4.6. إدارة الكابلات

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables. This improves airflow and maintains a clean internal appearance.

الصورة: انفجرت view of the case showing removable panels and internal structure.

صورة: الجزء الداخلي الخلفي view showing cable routing options and fan hub.

Image: Diagram showing the location of the four pre-installed 120mm fans and the 6x 3-pin fan hub with SATA power input.

5. تعليمات التشغيل

• تشغيل/إيقاف التشغيل: Use the power button located on the top front panel to turn the system on or off.
• زر إعادة الضبط: The reset button is also on the top front panel for system restarts.
• منافذ اللوحة الأمامية: Connect USB devices to the USB 2.0 or USB 3.0 ports. Use the HD audio jacks for headphones and microphones.

Image: Close-up of the top front panel showing USB 3.0, USB 2.0, HD Audio, Reset, and Power buttons.

6. الصيانة

• تنظيف فلتر الغبار: The case includes dust filters on the front, top, and bottom (for PSU). Regularly remove and clean these filters to maintain optimal airflow and prevent dust buildup inside the system.
• التنظيف الداخلي: Periodically open the side panels and use compressed air to remove dust from internal components, especially fans and heatsinks.

7. استكشاف الأخطاء وإصلاحها

• النظام لا يعمل:
  • Ensure the power supply is properly connected to the wall outlet and the case.
  • Check all internal power connections (24-pin ATX, CPU power, GPU power).
  • Verify front panel power button cables are correctly connected to the motherboard.
• لا يوجد إخراج للعرض:
  • Confirm the monitor cable is connected to the graphics card, not the motherboard (if a dedicated GPU is installed).
  • أعد تركيب بطاقة الرسومات ووحدات ذاكرة الوصول العشوائي (RAM).
• مشاكل ارتفاع درجة الحرارة:
  • Ensure all case fans are spinning and connected correctly.
  • قم بتنظيف فلاتر الغبار والمكونات الداخلية.
  • Verify CPU cooler is properly seated and making good contact with the CPU.
• لم يتم اكتشاف محرك الأقراص:
  • Check SATA data and power cables for secure connections to both the drive and motherboard/power supply.
  • Verify the drive is enabled in the BIOS/UEFI settings.

8. الضمان والدعم

The DARKROCK Classico Max computer case comes with a ضمان لمدة 1 سنوات يسري هذا الضمان من تاريخ الشراء، ويغطي عيوب التصنيع وعيوب المواد في ظل الاستخدام العادي.

For technical support, warranty claims, or further assistance, please visit the official DARKROCK webالموقع الإلكتروني أو تواصل مع قسم خدمة العملاء. احتفظ بإيصال الشراء للتحقق من صحة الضمان.

Official DARKROCK Store: DARKROCK Amazon Store

9. معرض الوسائط

الصورة: الجانب الأمامي view of the DARKROCK Classico Max computer case.

الصورة: داخلية view of the case, highlighting its suitability for various applications like video editing, home theater, and gaming.

Image: Internal layout showing drive bay locations and case dimensions (18.3"D x 9.06"W x 18.78"H).

Image: Internal clearances for CPU cooler (max 180mm height), GPU (295mm, 400mm if drive bay removed), and motherboard sizes (E-ATX, ATX, M-ATX, ITX).

Image: Diagram illustrating liquid radiator and fan support locations (240/280/360mm liquid radiator, 140mm/120mm fans).

Image: Close-up of the top front panel showing USB 3.0, USB 2.0, HD Audio, Reset, and Power buttons.

الصورة: انفجرت view of the case showing removable panels and internal structure.

صورة: الجزء الداخلي الخلفي view showing cable routing options and fan hub.

Image: Diagram showing the location of the four pre-installed 120mm fans and the 6x 3-pin fan hub with SATA power input.

الفيديوهات