EMKE 1535x600mm

EMKE Hot Water Towel Warmer Radiator Instruction Manual

Model: 1535x600mm, Anthracite

مقدمة

Thank you for choosing the EMKE Hot Water Towel Warmer Radiator. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new radiator. Please read these instructions carefully before installation and retain them for future reference.

معلومات السلامة

  • Ensure all installation procedures are performed by a qualified professional.
  • Do not operate the radiator if it is damaged.
  • Keep children away from the radiator when it is hot.
  • The radiator operates with hot water; exercise caution to avoid burns.
  • لا تقم بتغطية المدفأة بمواد قابلة للاشتعال.

محتويات الحزمة

Before starting the installation, please verify that all components are present and undamaged.

  • EMKE Towel Warmer Radiator (1 unit)
  • بين قوسين ومسامير
  • دليل التثبيت
  • Note: Valves are not included and must be purchased separately.

تحديد

ميزةالتفاصيل
نموذج1535×600 ملم
الأبعاد (الارتفاع × العرض)1535 × 600 ملم
إنتاج الحرارة933 واط
مصدر الطاقةالماء الساخن
حجم الغرفة الموصى به6 متر مربع
خيط الاتصالG1/2"
Adjustable Wall Distance112-122 ملم
مادةHigh-quality steel with ecological coating
لونأنثراسايت
Product dimensions table and radiator diagram

Image showing product dimensions table and a diagram illustrating height and width of the radiator, including different size options.

الإعداد والتثبيت

This section outlines the steps for installing your EMKE towel warmer radiator. Professional installation is recommended.

1. التحضير

  • Ensure the wall is suitable to support the weight of the radiator when filled with water.
  • Gather all necessary tools (drill, level, measuring tape, wrench, etc.).
  • Confirm you have the required G1/2" valves (not included).

2. Mounting the Radiator

  1. Mark the desired position for the radiator on the wall, ensuring it is level.
  2. Drill holes for the mounting brackets according to the provided template.
  3. Secure the mounting brackets to the wall using appropriate fasteners.
  4. Hang the radiator onto the secured brackets.
  5. Adjust the wall distance of the radiator using the adjustable brackets (112-122 mm).
Diagram showing adjustable wall distance and universal G1/2 inch threading

Image illustrating the adjustable wall distance (112-122 mm) and the universal G1/2" connection threading with a 50mm connection distance.

3. Connecting to the Heating System

  • Connect the radiator to your hot water heating system using the G1/2" connections.
  • تأكد من أن جميع التوصيلات محكمة وخالية من التسرب.
  • The radiator supports both left and right side connections for flexible installation.

Video demonstrating the features and installation flexibility of the EMKE towel warmer radiator, including material layers, connection types, and adjustable wall distance.

تعليمات التشغيل

Once installed, operating your EMKE towel warmer radiator is straightforward.

  1. ملء النظام: Ensure your heating system is properly filled with water and bled of air.
  2. تشغيل: Open the valves connected to the radiator to allow hot water to circulate.
  3. Bleeding the Radiator: Use a radiator key to open the bleed valve (usually at the top of the radiator) until water starts to come out, indicating all air has been released. Close the valve immediately.
  4. التحكم في درجة الحرارة: The heat output is controlled by your central heating system's thermostat and the radiator valves. Adjust as needed for desired room temperature and towel warming.

The design with round tubes and lateral connections enhances air circulation, allowing towels to dry faster and maintaining heat longer for an efficient heating performance.

Image showing a mother and child in a bathroom with the EMKE towel warmer radiator installed

Image depicting the EMKE towel warmer radiator installed in a bathroom, providing warmth and a convenient place to dry towels.

صيانة

Regular maintenance ensures optimal performance and longevity of your EMKE towel warmer radiator.

  • تنظيف: نظف المبرد بانتظام بقطعة قماش ناعمة.amp cloth. Avoid abrasive cleaners or solvents that could damage the anthracite finish.
  • نزيف: Periodically bleed the radiator to remove any trapped air, which can reduce heating efficiency. This should be done when the radiator is cold.
  • التفتيشات: Annually inspect all connections for any signs of leaks or corrosion. Address any issues promptly.
  • ضغط النظام: Ensure your central heating system maintains the correct pressure as recommended by your heating system manufacturer.
Image showing the internal layers of the radiator material: low carbon steel and ecological coating

Image illustrating the high-quality construction of the radiator, featuring low-carbon steel and an ecological coating for durability and corrosion resistance.

استكشاف الأخطاء وإصلاحها

مشكلةالسبب المحتملحل
Radiator not heating upTrapped air; closed valves; low system pressureBleed the radiator; open valves; check and adjust system pressure
Radiator partially coldالهواء المحبوسBleed the radiator thoroughly
تسريب الوصلاتLoose fittings; damaged sealsTighten connections; replace seals if necessary (consult a professional)

If you encounter issues not listed here or if the problem persists, please contact EMKE customer support or a qualified heating engineer.

الضمان والدعم

EMKE offers a comprehensive service to ensure a hassle-free purchasing experience, including a 14-day right of return and a 2-year repair service.

  • سياسة العائدات: 14 يوم من الشراء.
  • خدمة الصيانة: 2 سنوات.
  • للحصول على الدعم، يرجى زيارة EMKE Store on Amazon أو اتصل بخدمة العملاء مباشرة.
EMKE customer service representatives

Image showing EMKE customer service representatives, emphasizing reliable support.

© 2024 EMKE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.