مقدمة
This manual provides essential information for the safe and effective use of your STARLEAD LED Bathroom Mirror. This wall-mounted mirror features integrated lighting, Bluetooth speakers, and anti-fog capabilities, designed to enhance your bathroom experience.
تتضمن الميزات الرئيسية ما يلي:
- تصميم مقاوم للانفجار: Constructed from toughened glass for enhanced safety and impact resistance.
- Built-in Dual Bluetooth Speakers: Delivers 360-degree surround sound for audio streaming.
- وظيفة مكافحة الضباب: An innovative anti-fog film keeps the mirror clear after showering.
- الإضاءة المخصصة: Offers three color temperatures (3000K warm, 4000K natural, 6500K cool) to suit various preferences.
- سطوع قابل للتعديل: Stepless dimming from 5% to 100% via a touch sensor.
- وظيفة الذاكرة الذكية: Retains your last light brightness and color temperature settings.
- التثبيت المرن: Can be installed vertically or horizontally, with options for hardwiring or plug-in connection.
Image: The STARLEAD LED Bathroom Mirror, showcasing its illuminated frame and integrated Bluetooth speaker feature.
معلومات السلامة
Please read all safety warnings before installation and use. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Handle the mirror with care due to potential sharp edges during unpacking and installation.
- Ensure all electrical connections are made by a qualified electrician if opting for hardwiring.
- Do not expose the mirror to excessive force or impact, as this may damage the tempered glass.
- Keep the mirror away from direct water spray or excessive humidity beyond normal bathroom conditions.
- افصل التيار الكهربائي دائمًا قبل التنظيف أو إجراء أي صيانة.
Image: Illustration demonstrating the superior impact resistance of STARLEAD's tempered glass compared to traditional glass, highlighting its safety features.
الإعداد والتثبيت
The STARLEAD LED Bathroom Mirror offers flexible installation options. It can be mounted vertically or horizontally. You can choose between hardwiring for a seamless look or using a plug-in connection for easier setup.
قبل التثبيت:
- قم بفك المرآة بعناية وتفقدها بحثاً عن أي تلف.
- Ensure the wall surface is clean, dry, and capable of supporting the mirror's weight (approximately 30.9 pounds).
- Determine your preferred mounting orientation (vertical or horizontal).
- For hardwiring, ensure the power supply is turned off at the circuit breaker.
خطوات التركيب:
- Measure and mark the desired mounting height and position on the wall.
- Drill pilot holes according to the provided mounting template (if applicable) and insert wall anchors.
- Secure the mounting brackets to the wall using appropriate screws.
- Carefully lift the mirror and align it with the mounting brackets. Secure the mirror to the brackets.
التوصيل الكهربائي:
- المكونات الإضافية: ما عليك سوى توصيل سلك الطاقة الخاص بالمرآة بمأخذ كهربائي قياسي.
- الأسلاك: Connect the mirror's electrical wires to your home's electrical system. This should only be performed by a qualified electrician to ensure compliance with local electrical codes and safety standards.
Image: The mirror supports two lighting control methods: direct touch sensor on the mirror and connection to a wall switch.
صورة: نظرة شاملةview of the mirror's features and dimensions, including Bluetooth, adjustable lighting, anti-fog, and tempered glass construction.
تعليمات التشغيل
Your STARLEAD LED Bathroom Mirror is equipped with intuitive touch controls located on the mirror surface.
Power and Lighting Control:
- تشغيل/إيقاف التشغيل: اضغط على أيقونة الطاقة (☀) to turn the mirror lights on or off.
- ضبط درجة حرارة اللون: Double-tap the power icon to cycle through the three color temperatures: 3000K (warm light), 4000K (natural light), and 6500K (cool light).
- خفض سطوع الشاشة: Long-press the power icon to adjust the brightness from 5% to 100%. Release when the desired brightness is achieved.
- وظيفة الذاكرة: The mirror will remember your last chosen brightness and color temperature settings when turned off and on again.
Image: Visual representation of the three available color temperatures: warm (3000K), natural (4000K), and cool (6500K).
Image: A slider graphic illustrating the stepless dimming capability from 5% to 100% brightness, along with the memory function.
وظيفة مكافحة الضباب:
- تفعيل خاصية منع الضباب: انقر على أيقونة منع الضباب (≈) to activate the defogging function.
- The anti-fog film will heat up to clear condensation from the mirror surface, typically within 3-5 minutes.
- Tap the icon again to turn off the anti-fog function.
Image: The anti-fog function in action, showing a clear mirror surface even in a steamy environment.
تشغيل مكبر صوت بلوتوث:
- الاقتران: Tap the Bluetooth icon (☋) to enable Bluetooth pairing mode. The icon may flash to indicate it's ready to pair.
- On your mobile device, search for "STARLEAD Mirror" (or similar name) in your Bluetooth settings and connect.
- Once paired, you can stream audio directly to the mirror's built-in dual speakers.
- Tap the Bluetooth icon again to disconnect or turn off the Bluetooth function.
Image: A user enjoying music while using the mirror, demonstrating the integrated Bluetooth speaker feature.
الصيانة والعناية
Proper care will ensure the longevity and optimal performance of your STARLEAD LED Bathroom Mirror.
- تنظيف: استخدمي قطعة قماش ناعمةamp cloth with a mild glass cleaner to wipe the mirror surface. Avoid abrasive cleaners or harsh chemicals that could damage the glass or electronic components.
- السلامة الكهربائية: Always ensure the power is disconnected before cleaning or performing any maintenance.
- تقتيش: قم بفحص أدوات التثبيت بشكل دوري للتأكد من بقاء المرآة مثبتة بإحكام على الحائط.
- عمر الصمام: The integrated LED light strip has a lifespan of over 50,000 hours. No user-replaceable parts for the LED lighting.
Image: Detail of the mirror's light strip, highlighting its waterproof design, frontlit and backlit capabilities, energy efficiency, and eye-friendly illumination.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| أضواء المرآة لا تعمل. | No power supply; loose connection; faulty touch sensor. | Check power outlet/circuit breaker. Ensure all electrical connections are secure. Try tapping the power button firmly. |
| خاصية منع الضباب لا تعمل. | لم يتم تفعيل خاصية منع الضباب؛ مشكلة في الطاقة. | Ensure the anti-fog icon is tapped to activate. Verify mirror has power. Allow 3-5 minutes for heating. |
| Bluetooth not connecting or poor sound quality. | Mirror not in pairing mode; device too far; interference. | Tap Bluetooth icon to enter pairing mode. Ensure your device is within range. Disconnect other Bluetooth devices. |
| Light brightness or color temperature not changing. | Incorrect operation of touch sensor. | For brightness, long-press the power icon. For color temperature, double-tap the power icon. |
تحديد
| ميزة | التفاصيل |
|---|---|
| ماركة | ستارليد |
| رقم الموديل | USM3017 |
| أبعاد المنتج | 36 بوصة طول × 48 بوصة عرض |
| شكل | مستطيل |
| مادة الإطار | زجاج مقسّى |
| نوع التركيب | حامل الحائط |
| درجات حرارة ألوان الضوء | 3000 كلفن (دافئ)، 4000 كلفن (طبيعي)، 6500 كلفن (بارد) |
| ضبط السطوع | Stepless dimming (5% to 100%) |
| المميزات الخاصة | Bluetooth Speaker, Anti-Fog, Memory Function, Waterproof |
| وزن العنصر | 30.9 رطل |
الضمان والدعم
For warranty information, technical support, or any inquiries regarding your STARLEAD LED Bathroom Mirror, please contact STARLEAD customer service. Refer to the product packaging or the official STARLEAD webالموقع للحصول على تفاصيل الاتصال الحالية.
We recommend keeping your purchase receipt as proof of purchase for warranty claims.
الدعم عبر الإنترنت: Visit the STARLEAD Store on Amazon