دليل المستخدم لآلة النقش بالليزر Aufero

1. انتهى المنتجview

The Aufero Laser Engraver Machine is designed for precision engraving and cutting, featuring a 10W diode laser output and a spacious 17x15.7 inch engraving platform. This beginner-friendly machine incorporates safety features such as X&Y axis limit switches to enhance positioning accuracy and prevent collisions. The unique knife-edge platform, also known as a vector grid platform, provides a flat surface with narrow, parallel, and closely spaced slits, ideal for various engraving and cutting tasks. Its design allows for a removable, size-adjustable working panel.

Key specifications include a 32-bit MCU motherboard, support for up to 921600 baud rate, an engraving speed of 12000mm/min, and a fine laser spot size of 0.1 x 0.05mm. The engraving platform is constructed from all-metal with high-precision CNC processing, ensuring durability and resistance to laser heat.

الشكل 1.1: انتهىview of the Aufero Laser Engraver Machine, showcasing its design and the 10W Aufero branding on the engraving surface.

2. معلومات السلامة

This laser engraver is a Class 4 laser product. Class 4 lasers are high-power lasers that can cause severe eye and skin injuries from direct or scattered exposure. They can also pose a fire hazard. Adherence to all safety guidelines is critical for safe operation.

• حماية العين: Always wear appropriate laser safety goggles that are rated for the specific wavelength and power of this laser (10W diode laser). Never look directly into the laser beam or its reflection.
• حماية الجلد: تجنب تعريض الجلد مباشرة لشعاع الليزر.
• تهوية: Operate the machine in a well-ventilated area to dissipate fumes and smoke produced during engraving and cutting, which can be harmful. Consider using an exhaust system.
• السلامة من الحرائق: Keep a fire extinguisher nearby. Do not leave the machine unattended during operation, especially when cutting flammable materials. Ensure the work area is clear of combustible materials.
• التوافق المادي: Only engrave or cut materials known to be safe for laser processing. Avoid materials that produce toxic fumes or catch fire easily.
• التوقف في حالات الطوارئ: Familiarize yourself with the location and operation of the emergency stop button or power switch to quickly shut down the machine in an emergency.
• الأطفال والحيوانات الأليفة: احتفظ بالأطفال والحيوانات الأليفة بعيدًا عن منطقة التشغيل.
• سطح مستقر: ضع الجهاز على سطح ثابت ومستوٍ وغير قابل للاشتعال.

3. المميزات

• Powerful 10W Diode Laser: Capable of engraving and cutting a wide range of materials with precision.
• مساحة نقش كبيرة: A generous 15.7 x 15.7 inch (400mm x 400mm) working area accommodates larger projects.
• التشغيل بسرعة عالية: Engraving speeds up to 12000mm/min for efficient workflow.
• Precision Laser Spot: A fine 0.1 x 0.05mm laser spot ensures detailed and accurate results.
• Advanced Motherboard: Equipped with a 32-bit MCU for stable and fast processing, supporting high baud rates up to 921600.
• X&Y Axis Limit Switches: Enhance positioning accuracy and prevent the laser head from exceeding the working area, protecting the machine from collisions.
• All-Metal Knife-Edge Platform: Durable and heat-resistant, designed for optimal material support and smoke extraction during operation. The platform is made from high-precision CNC processed metal.
• Removable and Adjustable Working Panel: The unique splicing design allows for size adjustment and easy removal of the working panel, offering flexibility for various project sizes and cleaning.

Figure 3.1: Illustration of the Aufero Laser Engraver's all-metal construction and the knife-edge platform, designed for durability and heat resistance.

الشكل 3.2: مفصل view of the unique removable and adjustable working bed, highlighting its features such as rotatable screws, movable fixed corners, and square notches for protection.

4. الإعداد

Proper setup is essential for the safe and effective operation of your Aufero Laser Engraver. Follow these general steps:

1. فك التعبئة: أزل جميع المكونات من العبوة بعناية. تأكد من وجود جميع الأجزاء المذكورة في قائمة التعبئة وعدم وجود أي تلف.
2. حَشد: Assemble the frame according to the provided assembly instructions. Ensure all screws are tightened securely.
3. تركيب وحدة الليزر: Install the laser module onto the gantry. Ensure it is firmly seated and the electrical connections are secure.
4. Working Platform Setup: Place the knife-edge working platform on a stable, level, and non-flammable surface. The platform should be positioned directly beneath the laser's working area.
5. وصلات الكابلات: Connect the power cable, USB cable (if applicable), and any other necessary cables to the machine and your computer.
6. تثبيت البرنامج: Install the recommended laser control software on your computer. Refer to the software's specific instructions for installation and driver setup.
7. Ventilation Setup: Ensure adequate ventilation for the work area. If using an enclosure or exhaust system, set it up according to its instructions.
8. معدات السلامة: Always have your laser safety goggles readily available and wear them before powering on the machine.

5. تعليمات التشغيل

This section provides general guidance for operating the Aufero Laser Engraver. Specific operations may vary based on the software used.

1. إعداد المواد:
   • Select a material suitable for laser engraving or cutting. Common materials include wood, acrylic, leather, and certain metals (for engraving).
   • Place the material securely on the knife-edge working platform. Ensure it is flat and does not move during operation.
2. إعداد التصميم:
   • Create or import your design using the laser control software.
   • Adjust the design size and position to fit your material and desired output.
3. إعدادات المعلمة:
   • Set the laser power, speed, and number of passes based on the material type and desired effect (engraving or cutting). Refer to material testing guides or recommended settings within your software.
   • Ensure the laser focus is correctly set for your material thickness.
4. Framing/Preview:
   • استخدم وظيفة التأطير في برنامجك لـview the laser's path on the material without firing the laser at full power. This helps confirm correct positioning.
5. بدء العملية:
   • Ensure all safety precautions are in place, including wearing laser safety goggles and having adequate ventilation.
   • ابدأ عملية النقش أو القطع من خلال البرنامج.
   • Monitor the machine closely during operation. Be prepared to use the emergency stop if any issues arise.
6. انتهاء:
   • Once the operation is complete, wait for the laser to stop completely and for any fumes to clear before removing the material.
   • Carefully remove the engraved or cut material.

الشكل 5.1: مثالamples of various materials that can be engraved, including acrylic, metal, wood, and leather, demonstrating the machine's versatility.

Figure 5.2: Demonstration of optimal laser cutting results, highlighting smooth edges, clean work, and the absence of burning stains when proper settings are applied.

6. الصيانة

Regular maintenance ensures the longevity and optimal performance of your Aufero Laser Engraver.

• تنظيف عدسة الليزر: The laser lens can accumulate dust and debris, affecting laser performance. Gently clean the lens with a specialized lens cleaning solution and a lint-free cloth or cotton swab. Perform this regularly, especially after extended use.
• Cleaning the Working Platform: The knife-edge platform can collect residue from engraved materials. Clean it regularly to maintain optimal air circulation and prevent buildup.
• قضبان التوجيه المزلقة: قم بوضع كمية صغيرة من مادة التشحيم بشكل دوري على قضبان التوجيه لضمان حركة سلسة لوحدة الليزر.
• فحص الأحزمة: Inspect the timing belts for tension and wear. Adjust or replace them if necessary to maintain engraving accuracy.
• النظافة العامة: Keep the entire machine free of dust and debris. Use compressed air to clear hard-to-reach areas.
• إيقاف التشغيل عند عدم الاستخدام: Always power off and unplug the machine when not in use for extended periods.

7. استكشاف الأخطاء وإصلاحها

This section addresses common issues you might encounter with your laser engraver.

8. المواصفات

Figure 8.1: Product size and dimensions of the knife-edge working platform, indicating its all-metal construction and weight.

9. الضمان والدعم

For warranty information and technical support, please refer to the documentation included with your product or contact Aufero Technology directly. As per Amazon's return policy, this product may be eligible for returns within 30 days of purchase. For specific warranty terms and conditions, please consult the manufacturer's official website or the warranty card provided with your machine.

You can visit the official Aufero Store on Amazon for additional resources and contact information: Aufero Store