JFUDJKLI RMDZW-3PN 100A Three-Phase 4-Wire Smart Circuit Breaker User Manual

1. المقدمة

The JFUDJKLI RMDZW-3PN 100A is a sophisticated three-phase, four-wire smart circuit breaker designed for advanced electrical system management. This device integrates an LCD display for real-time monitoring and offers comprehensive protection features including overflow, phase loss, overcurrent, and voltage imbalance protection. It is suitable for various applications requiring precise control and monitoring of electrical circuits, including photovoltaic two-way metering.

2. مواصفات المنتج

• يكتب: Photovoltaic Smart Meter / Circuit Breaker
• تصنيف المجلدtage: 220/380 فولت
• التردد المقدر: 50/60 هرتز
• شاشة: Backlit Digital LCD Display
• قدرة الكسر: 6كا
• التيار القابل للتعديل: 1-100 أمبير
• وظائف الحماية:
  • Loss of Current Delay Protection
  • Overcurrent Delay Protection
  • المجلدtagحماية من عدم التوازن
  • أكثر وتحت المجلدtagالحماية
  • Phase Loss Protection
  • Reclosing Function
• وظائف إضافية: Electricity Measurement, Device Sharing, Voice Control, Remote Control (anytime, anywhere), Thermometer, Photovoltaic Two-Way Metering
• الحياة الميكانيكية: أكثر من 100,000 مرة
• درجة حرارة العمل: -25 درجة مئوية إلى 70 درجة مئوية

3. معلومات السلامة

WARNING: Electrical shock hazard. Installation and servicing must be performed by qualified personnel only. Failure to follow these instructions can result in serious injury or death.

• Always disconnect power at the main circuit breaker or fuse box before installing or servicing this device.
• تأكد من أن جميع توصيلات الأسلاك آمنة وتتوافق مع قوانين الكهرباء المحلية والوطنية.
• لا تقم بتشغيل الجهاز إذا كان يبدو تالفًا.
• This device is designed for indoor use in dry environments unless otherwise specified.
• تحقق من المجلد الصحيحtagقم بتقييم القيم الكهربائية والتيار قبل التركيب.

4. محتويات العبوة

يرجى التحقق من الحزمة للعناصر التالية:

• JFUDJKLI RMDZW-3PN 100A Smart Circuit Breaker (1 unit)
• دليل المستخدم (هذا المستند)

في حال وجود أي عناصر مفقودة أو تالفة، يرجى الاتصال بالمورد الخاص بك على الفور.

5. التثبيت والإعداد

Installation of the RMDZW-3PN 100A smart circuit breaker requires electrical expertise. It is strongly recommended that installation be performed by a licensed electrician.

5.1 Wiring Diagram (General Guidance)

The device is a three-phase, four-wire system. Ensure correct connection of the three phase lines (L1, L2, L3) and the neutral line (N) to the corresponding terminals. The load should be connected to the output terminals.

Note: A detailed wiring diagram is typically provided with the physical product or by the manufacturer. Always refer to the specific diagram for your model.

5.2 التركيب

Mount the circuit breaker securely within an appropriate electrical enclosure, ensuring adequate ventilation and clearance for wiring and operation. The device is designed for DIN rail mounting.

5.3 التشغيل الأولي

After installation, carefully restore power to the circuit. The LCD display should illuminate, indicating the device is operational. Follow the on-screen prompts or refer to the 'Operation' section for initial configuration.

6. التشغيل

The RMDZW-3PN 100A features an intuitive LCD display and control buttons for monitoring and configuration.

6.1 عرض أكثرview

الصورة 1: أمام view of the RMDZW-3PN 100A Smart Circuit Breaker. This image displays the front of the RMDZW-3PN 100A smart circuit breaker. The prominent LCD screen shows real-time voltage readings for three phases (L1, L2, L3), indicating a value of 235.3V for each. To the right of the screen are control buttons for navigation and settings, including 'REV', 'V', and 'OK', along with a gear icon for settings. The model number 'RMDZW-3PN 100A' and 'CE' certification mark are visible below the screen.

The backlit LCD displays various parameters such as voltage (V), current (A), power (W), energy consumption (kWh), and status indicators for protection functions. Use the navigation buttons to cycle through different display modes.

6.2 أزرار تحكم

• Gear Icon Button: يصل إلى قائمة الإعدادات.
• REV Button: Navigates backward or scrolls through options.
• زر V: Cycles through voltage display modes or confirms selections.
• زر موافق: تأكيد الاختيارات أو الدخول إلى القوائم الفرعية.

6.3 ضبط الإعدادات

To adjust parameters such as current limits (1-100A), delay times for protection, or other smart functions:

1. اضغط على Gear Icon Button للدخول إلى قائمة الإعدادات.
2. استخدم القس و V أزرار للتنقل بين خيارات القائمة.
3. يضعط OK to select an option or enter a sub-menu.
4. اضبط القيم باستخدام القس و V ، ثم اضغط على OK للتأكيد.
5. Exit the settings menu by navigating to the 'Exit' option or holding down a specific button (refer to on-screen prompts).

6.4 Smart Features (Voice Control, Remote Control, Device Sharing)

This device supports smart integration. Refer to the accompanying smart home application guide or manufacturer's website for instructions on connecting the device to your smart home system, enabling voice control, remote monitoring, and device sharing functionalities.

7. استكشاف الأخطاء وإصلاحها

If you encounter issues with your RMDZW-3PN 100A, refer to the following common problems and solutions:

• لا يوجد شاشة/جهاز لا يعمل:
  • Check the main power supply to the circuit breaker.
  • تأكد من أن جميع توصيلات الأسلاك آمنة.
  • التحقق من حجم الإدخالtage is within the rated range (220/380V).
• تعطل الجهاز بشكل متكرر:
  • An overcurrent or fault condition may exist in the circuit. Inspect connected loads.
  • Check the set current limit (1-100A) in the device settings; it might be too low for the connected load.
  • Investigate for voltage imbalances or phase loss conditions.
• Incorrect Readings on Display:
  • Ensure the device is correctly calibrated (if applicable, refer to advanced settings).
  • Verify the current transformers (CTs) are correctly installed and oriented (if external CTs are used).
• Cannot Connect to Smart Home System:
  • تأكد من أن شبكة Wi-Fi نشطة وتقع ضمن النطاق.
  • Check the smart home application for correct device pairing procedures.
  • Verify the device's network status on its display.

If the problem persists, contact customer support or a qualified electrician.

8. المواصفات

الصورة 2: بزاوية view of the RMDZW-3PN 100A Smart Circuit Breaker with dimensions. This image shows an angled view of the RMDZW-3PN 100A smart circuit breaker, highlighting its physical dimensions. The width is indicated as 75.3mm, the height as 75.3mm, and the depth as 89.5mm. Another dimension of 58.3mm is shown, likely referring to the depth of the main body without the terminal covers. The LCD screen and control buttons are also visible, providing context for the measurements.

9. الصيانة

The RMDZW-3PN 100A smart circuit breaker is designed for minimal maintenance. However, periodic checks are recommended:

• التفتيش البصري: Regularly inspect the device for any signs of physical damage, discoloration, or loose connections.
• تنظيف: حافظ على نظافة الجهاز وخلوه من الغبار والأوساخ. استخدم قطعة قماش جافة وناعمة للتنظيف. لا تستخدم المنظفات السائلة.
• فحوصات الاتصال: Periodically ensure all terminal connections are tight and secure.

افصل الطاقة دائمًا قبل إجراء أي صيانة.

10. الضمان والدعم

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact JFUDJKLI customer service through their official channels. Keep your purchase receipt as proof of purchase.