دليل تعليمات ماكينة لحام البقعة المحمولة AWithZ H2

1. معلومات السلامة

Please read and understand all safety instructions before operating the AWithZ H2 Handheld Spot Welder. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• احرص دائمًا على ارتداء معدات الحماية الشخصية المناسبة، بما في ذلك نظارات السلامة، عند تشغيل جهاز اللحام النقطي.
• التأكد من أن منطقة العمل جيدة التهوية وخالية من المواد القابلة للاشتعال.
• Do not operate the device in wet conditions or expose it to rain.
• أبقِ الأطفال والأفراد غير المصرح لهم بعيداً عن منطقة التشغيل.
• Do not touch the welding tips immediately after use, as they will be hot.
• استخدم فقط كابل الشحن والملحقات المرفقة.
• If the device overheats (reaches 60°C), it will automatically shut down. Allow it to cool before resuming operation.
• Do not attempt to disassemble or modify the device. Contact customer support for repairs.

2. انتهى المنتجview

The AWithZ H2 is a compact and portable handheld spot welder designed for various battery welding applications. It features an integrated design, eliminating the need for external welding pens, and offers precise control through its 1.5-inch LCD display.

المميزات الرئيسية:

• التصميم المتكامل: Power source and welding pen are combined into one unit for convenient one-handed operation.
• صغير الحجم وخفيف الوزن: Weighing only 260g (product weight) and measuring 8 x 3 x 5 cm, it is ideal for home and outdoor use.
• شاشة إل سي دي 1.5 بوصة: Provides real-time information including temperature, mode selection (automatic/manual), preheating time, trigger time, power level (99 adjustable gears), language settings, sound on/off, display brightness, and auto-power off time.
• التوافق الواسع: Suitable for welding various cylindrical lithium batteries (18650, 21700, 26650, 32650), mobile phone batteries, button batteries, nickel-hydrogen batteries, and nickel-cadmium batteries.
• دعم مادي: Capable of welding thin nickel-plated sheets, stainless steel sheets, and other materials. Recommended welding thickness is 0.1mm to 0.2mm.
• أوضاع التشغيل المزدوجة: Offers both automatic and manual dual-pulse output modes for versatile use.
• مميزات السلامة: Built-in temperature sensor automatically shuts down the device if it reaches 60°C to prevent damage.

محتويات الحزمة:

• ماكينة لحام البقعة المحمولة AWithZ H2
• Nickel Sheets
• الشاش
• كابل الشحن (النوع C)

Image: AWithZ H2 Handheld Spot Welder and its accessories, including nickel sheets, gauze, and a charging cable.

3. الإعداد

3.1 شحن الجهاز

Before first use, fully charge the spot welder. Connect the provided Type-C charging cable to the charging port on the device and to a suitable USB power adapter (not included). The LCD display will indicate the charging status. A full charge typically takes approximately 2.5 hours.

3.2 تشغيل/إيقاف التشغيل

To power on the device, press and hold the power button located on the top of the unit. The LCD screen will illuminate. To power off, press and hold the power button again until the screen turns off.

3.3 الإعدادات الأولية

Upon powering on, the LCD display will show various settings. Use the adjustment keys to navigate and select options. The main settings include:

• وضع: Switch between Automatic and Manual welding modes.
• المعدات: Adjust the power level from 1.0 to 9.9 (representing 99 adjustable gears).
• سخن: Set the preheating time (e.g., 0-5ms).
• Trigger Time: Set the trigger delay time (e.g., 0.5-5s).
• لغة: حدد اللغة المفضلة لديك للواجهة.
• صوت: Turn sound notifications on or off.
• سطوع: اضبط سطوع الشاشة.
• إيقاف التشغيل التلقائي: Set the idle time before automatic shutdown for safety.

Image: Diagram illustrating the LCD screen, Type-C charging port, ON/OFF/Option switch, adjustment keys, manual mode button, and welding pins.

4. تعليمات التشغيل

4.1 التحضير للحام

• Ensure the battery surfaces and nickel strips are clean and free from oxidation or debris. Use the provided gauze if necessary.
• Select the appropriate nickel strip thickness for your application. The AWithZ H2 supports 0.1mm to 0.2mm nickel strips.
• Place the nickel strip firmly on the battery terminal where the weld is to be made.

4.2 ضبط معايير اللحام

Use the adjustment keys to set the welding parameters on the LCD screen:

• وضع: Choose between 'Auto' for automatic pulse output or 'Manual' for controlled pulse output.
• المعدات: Adjust the power level (1.0-9.9) based on the material thickness and desired weld strength. Start with a lower setting and gradually increase if needed.
• سخن: Adjust the preheating time. This helps prepare the material for a stronger weld.
• Trigger Time: Adjust the delay before the welding pulse is triggered.

Image: The LCD display showing various adjustable settings such as temperature, mode, preheat, trigger time, and gear level.

4.3 إجراء لحام نقطي

1. Hold the spot welder firmly in one hand.
2. Position the two welding tips onto the nickel strip, ensuring they are parallel and make good contact with the material and the battery terminal. Apply gentle, even pressure.
3. In 'Auto' mode, the weld will trigger automatically after the set trigger time once good contact is detected. In 'Manual' mode, press the manual mode button to initiate the weld.
4. Observe the weld. A good weld should be strong and clean. If the weld is weak or burns the material, adjust the power level (Gear) and other parameters accordingly.
5. Repeat the process for each desired weld point.

Image: The AWithZ H2 handheld spot welder in action, demonstrating the welding process on a battery pack with nickel strips.

Image: A visual comparison highlighting the ease of use of the integrated AWithZ H2 spot welder compared to traditional models with external welding pens.

4.4 عرض فيديو

5. الصيانة

5.1 التنظيف

• Regularly clean the welding tips with fine sandpaper or a suitable abrasive to remove any residue and ensure optimal conductivity.
• Wipe the body of the device with a soft, dry cloth. Do not use harsh chemicals or solvents.

5.2 الشحن والعناية بالبطارية

• قم بشحن الجهاز بانتظام، حتى لو لم تكن تستخدمه بشكل متكرر، للحفاظ على صحة البطارية.
• تجنب تفريغ البطارية بالكامل قبل إعادة شحنها.

5.3 التخزين

Store the spot welder in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case to prevent damage.

6. استكشاف الأخطاء وإصلاحها

If you encounter issues with your AWithZ H2 Handheld Spot Welder, please refer to the following common troubleshooting steps:

If these steps do not resolve the issue, please contact AWithZ customer support for further assistance.

7. المواصفات

8. الضمان والدعم

AWithZ products are designed for quality and reliability. For warranty information, technical support, or any questions regarding your AWithZ H2 Handheld Spot Welder, please refer to the contact information provided with your purchase or visit the official AWithZ webموقع.

يرجى الاحتفاظ بإثبات الشراء الخاص بك لمطالبات الضمان.