مقدمة
This manual provides detailed instructions for the installation, operation, and maintenance of your Gopper 12-inch Ultra Quiet Bathroom Exhaust Fan with 6500K LED Light. Please read this manual thoroughly before beginning any procedures to ensure safe and efficient use of the product.
The Gopper bathroom exhaust fan is designed for ventilating, exhausting, and dehumidifying spaces up to 100 sq. ft. It features a powerful 120 CFM airflow and operates at an ultra-quiet 1.0 Sone noise level. The integrated 6500K LED light provides bright, cool white illumination. This energy-efficient unit is suitable for various residential applications, including bathrooms, laundry rooms, and bedrooms.
Image: The Gopper 120CFM TurboFlow Vent Fan effectively removes air from a modern bathroom setting.
معلومات السلامة
تحذير: لتقليل خطر نشوب حريق أو حدوث صدمة كهربائية أو إصابة الأشخاص، يجب مراعاة ما يلي:
- Read all instructions and safety information before installing or using this fan.
- All electrical work must be performed by a qualified electrician in accordance with all applicable codes and standards.
- Always disconnect power at the service panel before working on or near the fan.
- لا تستخدم هذه المروحة مع أي جهاز تحكم في سرعة الحالة الصلبة.
- This product is not intended for use in kitchens or areas where grease or oil may accumulate.
- Do not install the product directly above a shower or bathtub unless it is connected to a GFCI-protected branch circuit.
- تأكد من تأريض المنتج بشكل صحيح.
- Do not damage hidden electrical wiring or utilities when making ceiling cuts.
- Do not install in a ceiling with less than 3mm gap between the switch and the ceiling.
- هذا المنتج غير مخصص للاستخدام من قبل الأشخاص (بما في ذلك الأطفال) الذين يعانون من ضعف القدرات الجسدية أو الحسية أو العقلية ، أو نقص الخبرة والمعرفة ، ما لم يتم منحهم الإشراف أو التعليمات المتعلقة باستخدام المنتج من قبل شخص مسؤول عن سلامتهم .
- يجب مراقبة الأطفال الصغار والتأكد من عدم لعبهم بالجهاز.
Parts & Specifications
المكونات المتضمنة:
- Bathroom Exhaust Fan Unit with LED Light
- Aluminum Foil Tube (Duct)
- Clampس(2)
- Air Vent (Draft Stopper)
- موصلات الأسلاك
- مسامير التثبيت
- Product Instructions Manual
Image: Key components of the Gopper Bathroom Exhaust Fan, including the main unit, ducting, and connectors.
مواصفات المنتج:
| ميزة | التفاصيل |
|---|---|
| ماركة | Gopper |
| اسم الموديل | مروحة شفط الحمام مع الضوء |
| أبعاد المنتج | 12 بوصة عمق × 12 بوصة عرض × 6.7 بوصة ارتفاع |
| حجم اللوحة | 11.8 بوصة × 11.8 بوصة (30 سم × 30 سم) |
| تصاعد هول الحجم | 9.8 بوصة × 9.8 بوصة (24.8 سم × 24.8 سم) |
| قطر القناة | 4.0 بوصة (10 سم) |
| سعة تدفق الهواء | 120 قدم مكعب في الدقيقة (قدم مكعب في الدقيقة) |
| مستوى الضوضاء | 1.0 أبناء |
| درجة حرارة لون ضوء LED | 6500K (Cool White, non-adjustable) |
| لومن ضوء LED | 1500 لومن |
| واتtage | 42 واط |
| المجلدtage | 110 فولت |
| مصدر الطاقة | AC |
| نوع الغرفة | Bathroom, Bedroom, Garage, Laundry Room, Living Room |
| نوع التركيب | التركيب على السقف |
| مادة | المعدن والبلاستيك |
| كفاءة الطاقة | معتمد من Energy Star |
Image: The fan is suitable for rooms up to 100 square feet, ensuring effective ventilation.
تثبيت
ملحوظة: All electrical work should be carried out by a licensed and qualified electrician. Ensure power is disconnected at the circuit breaker before beginning installation.
خطوات ما قبل التثبيت:
- تحقق من الأبعاد: Confirm that your ceiling opening matches the required mounting hole size of 9.8" x 9.8" (24.8cm x 24.8cm). The panel size is 11.8" x 11.8" (30cm x 30cm).
- تحضير الأسلاك: Ensure you have separate wiring for the fan and light if you wish to control them independently. The fan requires a 110V power supply.
- مجاري الهواء: Prepare the 4-inch ducting for connection to the fan unit.
Tool-Free Ceiling Installation (3 Steps):
- فرقعة: Position the fan unit into the prepared ceiling opening. The unit is designed for a secure fit.
- قفل: Secure the fan unit to the ceiling using the provided mounting screws. Ensure it is firmly attached to the wood frame or ceiling joists for stability.
- فعله: Insert the light panel into the fan housing. The LED power wire needs to be connected to the switch separately or connected in parallel to the fan power.
Image: Visual guide for the simple three-step installation process: Snap the unit into place, Lock it with screws, and then the installation is Done.
مخطط الأسلاك:
The fan and light can be controlled separately. The fan motor has its own wiring (black, white, green for ground), and the LED light has separate wiring (blue, brown, green for ground). Connect these to your wall switches as per local electrical codes. Modern wire connectors are provided for ease of installation.
فيديو: يقدم هذا الفيديو نظرة عامة شاملةview of the Gopper Bathroom Exhaust Fan with Light, demonstrating its features and quiet operation.
تعليمات التشغيل
The Gopper Bathroom Exhaust Fan is designed for straightforward operation. It features a single speed for ventilation and a fixed color temperature LED light.
- تشغيل مروحة: Activate the fan using the dedicated wall switch. The fan will operate at 120 CFM, effectively removing moisture and odors from the room.
- عملية خفيفة: Activate the 6500K LED light using its dedicated wall switch. The light provides 1500 lumens of bright, cool white illumination. The color temperature is non-adjustable.
- الأداء الهادئ: The fan operates at a low noise level of 1.0 Sones, ensuring a quiet environment.
Image: The fan's 1.0 Sone operation ensures a quiet environment, barely perceptible to the human ear.
Image: The powerful exhaust quickly removes shower steam, preventing foggy mirrors.
صيانة
Regular maintenance ensures optimal performance and extends the lifespan of your exhaust fan. Always disconnect power at the circuit breaker before performing any maintenance.
- Cleaning the Grille and Cover: Switch off power at first. Remove the fan cover and grille. Wash them in warm water with a brush and neutral cleaner. Do not use water over 60°C, petrol, benzene, thinner, or any other organic solvent to clean. Do not allow water to enter the motor.
- تنظيف شفرات المروحة: Wipe the fan blades with a soft cloth. Do not rinse them in water.
- إعادة التجميع: Once all parts are dry, reassemble the fan cover and grille.
استكشاف الأخطاء وإصلاحها
If you experience issues with your Gopper Bathroom Exhaust Fan, consider the following:
- المروحة لا تعمل: Check the power supply and ensure the circuit breaker is not tripped. Verify all wiring connections are secure.
- الضوء لا يعمل: Ensure the light's power wire is correctly connected and the switch is functional.
- الضوضاء المفرطة: Check for any obstructions in the fan blades or ducting. Ensure the fan is securely mounted to prevent vibrations.
- سوء التهوية: Verify that the ducting is not blocked or kinked. Ensure the fan size is appropriate for your room's square footage (up to 100 sq. ft.).
If problems persist, contact a qualified electrician or the manufacturer's support for assistance.
الضمان والدعم
Gopper provides خدمة مدى الحياة for this product. The quality and structure of each bathroom fan meet regional, national, and international industry standards, ensuring reliability and service life. For any inquiries or support needs, please refer to the contact information provided with your purchase or on the Gopper webموقع.