TAVOSOP 2.4GHZ Wireless XLR Transmitter and Receiver

مقدمة

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your TAVOSOP 2.4GHZ Wireless XLR Transmitter and Receiver system. Please read this manual thoroughly before using the product to ensure proper function and longevity.

يثبت

ماذا يوجد في الصندوق

تأكد من وجود جميع المكونات في العبوة:

• 1 × جهاز استقبال
• 2 × أجهزة الإرسال
• 1 x 6.35mm to XLR plug
• 2 × كابلات شحن
• 1 × دليل المستخدم

المنتج انتهىview (Components and Controls)

The system consists of a receiver and two transmitters. Each unit features an LED display for power and frequency signal, a power button, and a charging interface.

شحن الأجهزة

The transmitter and receiver units are equipped with built-in rechargeable lithium batteries. Use the provided USB cables to charge the devices. Connect the charging cable to the DC 5V charging interface on each unit and plug the other end into a standard USB power source (e.g., computer USB port, USB wall adapter).

A full charge typically provides 5-8 hours of operating time.

Initial Pairing and Connection

The TAVOSOP wireless system is designed for plug-and-play operation. The transmitter and receiver should automatically pair when powered on. Ensure both units are charged before use.

1. تشغيل الطاقة: Press and hold the power button on both the receiver and each transmitter until the LED display illuminates.
2. الاقتران التلقائي: The units will automatically search for and connect to each other. The display on the receiver will show the channel and frequency when connected.
3. توصيل بمعدات الصوت: Plug the receiver into the input of your audio mixer, amplifier, or other compatible device. Plug the transmitter into your dynamic microphone or electric guitar/bass.

تعليمات التشغيل

التوصيل بأجهزة الصوت

The TAVOSOP system is versatile and can be used with various audio devices:

• الميكروفونات الديناميكية: Connect the transmitter directly to the XLR output of your dynamic microphone.
• Electric Guitar/Bass: Use the included 6.35mm to XLR plug to connect the transmitter to your instrument's output.
• Audio Mixers/Ampرافعات: Plug the receiver into an available XLR or 6.35mm input on your audio mixer, PA system, or ampمكبر.

تشغيل/إيقاف التشغيل واختيار القناة

To power on or off, press and hold the power button on each unit. The LED display will show the current channel (CH) and frequency (MHz). If interference occurs or you need to use multiple sets, you can change the channel by briefly pressing the power button on the receiver. The system supports multiple sets operating simultaneously without interference.

نصائح الاستخدام

• المدى الفعال: The wireless system provides an effective transmission range of approximately 30 meters (100 feet). Maintain line of sight for optimal performance.
• Low Noise and Latency: The 2.4G uncompressed wireless signal transmission ensures low noise and minimal latency for clear audio.
• مجموعات متعددة: Multiple TAVOSOP wireless systems can be used in the same area without interfering with each other, making it suitable for complex setups.

صيانة

العناية بالبطارية

لتعظيم عمر البطارية والأداء:

• Fully charge the devices before first use.
• تجنب تفريغ البطارية بالكامل بشكل متكرر.
• في حالة التخزين لفترة طويلة، اشحن البطاريات إلى حوالي 50% وأعد شحنها كل بضعة أشهر.
• Use only the provided charging cables or certified equivalents.

التنظيف والتخزين

Keep the devices clean and dry. Use a soft, dry cloth to wipe down the units. Avoid using harsh chemicals or abrasive materials. Store the system in a cool, dry place away from direct sunlight and extreme temperatures when not in use.

استكشاف الأخطاء وإصلاحها

• لا يوجد إخراج صوت:
  حل: Ensure both the transmitter and receiver are powered on and fully charged. Check that the receiver is securely plugged into the audio input of your mixer/amplifier and the transmitter into your microphone/instrument. Verify that the volume levels on your audio equipment are appropriately set. Confirm that the transmitter and receiver are paired (indicated by the display).
• التدخل أو الضوضاء الثابتة:
  حل: This system operates on the 2.4GHz band, which can be susceptible to interference from Wi-Fi routers, other wireless devices, or microwave ovens. Try changing the channel on the receiver. Ensure the transmitter and receiver are within the effective range (approx. 30 meters) and have a clear line of sight. Move away from potential sources of interference.
• عمر البطارية قصير:
  حل: Ensure the devices are fully charged before each use. Battery performance can degrade over time; if the issue persists, consider the age of the unit.
• الوحدات غير قابلة للاقتران:
  حل: Power off both the transmitter(s) and receiver, then power them back on. Allow a few seconds for automatic pairing. If they still do not pair, try manually changing the channel on the receiver.

تحديد

الضمان والدعم

معلومات الضمان

For specific warranty details, please refer to the documentation provided with your purchase or contact the seller directly. Standard return policies typically allow for refunds or replacements within 30 days of purchase.

دعم العملاء

If you encounter any issues or have questions regarding your TAVOSOP wireless system, please contact the seller or manufacturer for assistance. Provide your product model number and purchase date when seeking support.