مقدمة
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Monzlteck Adjustable Under Desk PC or NAS Mount Bracket Holder. This mount is designed to securely hold various devices such as NAS (Network Attached Storage) units, small form factor PCs, CPUs, UPS, Xbox Series X, and OptiPlex 7000/7010 under your desk, optimizing workspace and protecting your equipment.
مكونات المنتج
يرجى التأكد من وجود كافة المكونات قبل البدء في التثبيت:
- Adjustable Mounting Brackets (2 pieces)
- Mounting Template (1 piece)
- M4x16 Screws (8 pieces)
- Rubber Mats (pre-installed on brackets for device protection)
- Back Stopper Bracket (1 piece)
وصف الصورة: صورة علوية view of the Monzlteck Under Desk Mount components, including two adjustable black metal brackets, a paper mounting template, and eight M4x16 screws.
تحديد
| ميزة | مواصفة |
|---|---|
| أبعاد المنتج | 6 × 2 × 8 بوصة (15.24 × 5.08 × 20.32 سم) |
| وزن العنصر | 2.14 رطل (0.97 كجم) |
| نطاق العرض القابل للتعديل | 4.2 - 8 بوصة (10.7 - 20.3 سم) |
| مادة | معدن |
| لون | أسود |
| سعة الوزن | حتى 22 أرطال (10 كجم) |
Image description: A diagram showing the key dimensions of the Monzlteck Under Desk Mount, including its height, width, and adjustable range of 4.2 to 8 inches.
الإعداد والتثبيت
Follow these steps to properly install your Monzlteck Under Desk Mount:
Step 1: Prepare the Mounting Location
Identify a suitable flat surface under your desk for installation. Ensure there is enough clearance for your device and proper ventilation. Consider the placement of cables and power outlets.
Step 2: Mark Drill Holes
Use the provided mounting template to accurately mark the screw positions on the underside of your desk. Ensure the template is aligned correctly to accommodate your device.
الخطوة 3: إرفاق الأقواس
Using the M4x16 screws, securely attach the two main mounting brackets to the marked positions. A drill with a 5/64" pilot bit is recommended for pre-drilling holes to prevent wood splitting and ensure a secure fit.
Image description: A person using a power drill to attach one of the Monzlteck under-desk mount brackets to the underside of a wooden desk.
Step 4: Adjust Bracket Width
The brackets feature an adjustable width range of 4.2 to 8 inches (10.7 to 20.3 cm). Loosen the adjustment knobs on the side of each bracket, slide the inner plate to match the width of your device, and then tighten the knobs to secure the desired width.
Image description: A diagram illustrating the adjustable range of the Monzlteck under-desk mount, showing a minimum width of 4.2 inches (107mm) and a maximum width of 8 inches (203mm).
الخطوة 5: ضع جهازك
Carefully slide your NAS, PC, or other compatible device into the mounted brackets. Ensure it rests securely on the rubber mats at the bottom of the brackets to prevent scratches and provide stability.
Image description: A black small form factor PC securely mounted under a wooden desk using the Monzlteck adjustable brackets.
Step 6: Install Back Stopper (Optional)
If your device is shorter than the full depth of the mount, install the small back bracket to prevent the device from sliding too far back. This ensures the device remains flush with the front of the desk.
Image description: A screwdriver being used to adjust the position of a mounted device within the Monzlteck under-desk bracket, indicating the adjustable nature of the mount.
دليل التثبيت بالفيديو
Video description: An official Monzlteck video demonstrating the installation process and features of the Adjustable Under Desk PC or NAS Mount Bracket Holder.
تعليمات التشغيل
Adjusting Device Position
To adjust the horizontal position of your device within the mount, loosen the adjustment knobs, slide the device to the desired position, and re-tighten the knobs. This allows for precise placement and access to ports.
إدارة الكابلات
Utilize cable ties or other management solutions to route cables neatly away from your device and desk. This helps maintain a clean workspace and prevents cable clutter.
صيانة
To ensure the longevity and optimal performance of your Monzlteck Under Desk Mount, follow these maintenance guidelines:
- Regularly check all screws and adjustment knobs to ensure they remain tight and secure.
- Wipe the mount with a soft, dry cloth to remove dust. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Ensure adequate airflow around your mounted device to prevent overheating. The open design of the mount facilitates ventilation, but ensure no obstructions block air vents on your device.
استكشاف الأخطاء وإصلاحها
If you encounter any issues with your Monzlteck Under Desk Mount, refer to the following common solutions:
Device feels loose or unstable
Ensure all mounting screws attaching the brackets to the desk are fully tightened. Verify that the adjustment knobs holding your device are securely fastened. If the issue persists, re-evaluate the weight of your device against the mount's capacity.
Device does not fit
Re-check the dimensions of your device against the mount's adjustable width range (4.2 - 8 inches / 10.7 - 20.3 cm). Loosen the adjustment knobs and carefully adjust the bracket width to match your device's dimensions, then re-tighten.
Screws do not sit flush
For optimal flush fit, it is recommended to pre-drill pilot holes using a 5/64" drill bit before inserting the M4x16 screws. This helps prevent the screw heads from protruding and potentially affecting the inner dimensions or aesthetics.
الضمان والدعم
Monzlteck products are designed for durability and performance. For specific warranty information or technical support, please refer to the official Monzlteck webالموقع أو تواصل مع خدمة العملاء مباشرةً. احتفظ بإيصال الشراء لأي مطالبات بالضمان.