1. انتهى المنتجview
The VIVOTEK FD9383-HTV is a high-performance 5-megapixel outdoor network dome camera designed for robust surveillance applications. It features a 2.8-12mm motorized varifocal lens, providing flexibility in field of view, and integrated IR LEDs for clear night vision up to 98 feet. This camera is built to withstand harsh outdoor conditions with IP66 and IK10 ratings, ensuring protection against dust, water, and vandalism. It also includes a built-in microphone for audio monitoring.
الصورة 1.1: الجبهة view of the VIVOTEK FD9383-HTV 5MP Outdoor Network Dome Camera.
المميزات الرئيسية:
- 2560 x 1920 Resolution at 30 fps for high-quality video.
- IR LEDs for Night Vision up to 98 feet (30 meters).
- 2.8-12mm Motorized Varifocal Lens for flexible viewزوايا متعددة.
- 95.4 to 28.7° Horizontal Angle of View.
- Built-In Microphone for audio capture.
- IP66-Rated for outdoor use, protecting against dust and water.
- IK10-Rated for vandal resistance.
- Supports microSD Cards up to 1TB for local storage.
- RJ45 Ethernet with Power over Ethernet (PoE) Technology.
- Complies with ONVIF Profiles G, S, T for broad compatibility.
2. محتويات العبوة
تأكد من وجود جميع المنتجات وأنها بحالة جيدة. في حال وجود أي منتجات مفقودة أو تالفة، يرجى الاتصال بالبائع فوراً.
- VIVOTEK FD9383-HTV Network Dome Camera
- مجموعة براغي التثبيت (براغي، مثبتات جدارية)
- مجموعة موصلات مقاومة للماء
- Alignment Sticker/Drill Template
- دليل التثبيت السريع
- قرص البرنامج (أو معلومات رابط التنزيل)
3. معلومات السلامة
Please read these safety instructions carefully before operating the device to prevent injury to yourself or others and to avoid damage to the device. Keep this manual for future reference.
- تثبيت: Installation should be performed by qualified personnel only and must comply with all local codes.
- مصدر الطاقة: Use only the specified power source (PoE or 12V DC adapter, if applicable) to avoid fire or electric shock.
- بيئة: لا تعرض الكاميرا لدرجات حرارة شديدة أو رطوبة عالية أو بيئات أكالة تتجاوز ظروف التشغيل المحددة لها.
- تنظيف: افصل الكهرباء قبل التنظيف. استخدم قطعة قماش ناعمة وجافة. لا تستخدم منظفات سائلة أو بخاخات.
- الخدمة: لا تحاول خدمة هذا المنتج بنفسك. قم بإحالة جميع أعمال الصيانة إلى أفراد الخدمة المؤهلين.
4. الإعداد
4.1 التثبيت المادي
The FD9383-HTV camera is designed for wall or ceiling mounting. Ensure the mounting surface is strong enough to support the camera's weight.
- إعداد سطح التركيب: Use the provided drill template to mark the screw holes on the desired mounting location.
- ثقوب الحفر: Drill pilot holes for the mounting screws and, if necessary, for the network cable. Insert wall anchors if mounting on drywall or masonry.
- تثبيت قوس التثبيت: قم بتثبيت دعامة تثبيت الكاميرا على السطح باستخدام البراغي المرفقة.
- توصيل الكابلات: Route the Ethernet cable through the mounting surface or cable entry point. Connect the RJ45 connector to the camera's network port. If not using PoE, connect a 12V DC power adapter (sold separately) to the power input. Ensure waterproof connections for outdoor installations.
- Secure Camera Body: Attach the camera body to the mounting bracket. Adjust the camera's orientation and angle as needed.
- الانتهاء من التثبيت: Secure all covers and ensure the camera is firmly mounted and protected from the elements.
Image 4.1: Illustrative diagram of camera mounting and cable connection.
4.2 اتصال الشبكة
The camera supports Power over Ethernet (PoE) for simplified installation, allowing both power and data to be transmitted over a single Ethernet cable.
- Connect the camera to a PoE-enabled switch or a PoE injector using a standard Ethernet cable.
- Alternatively, connect to a standard network switch and use a separate 12V DC power adapter.
- Ensure your network is configured to assign an IP address to the camera (DHCP recommended for initial setup).
4.3 التكوين الأولي
After physical installation and network connection, you need to access the camera's web interface for initial configuration.
- اكتشف الكاميرا: Use VIVOTEK's IP Search utility (available on their website) or a network scanner to find the camera's IP address on your network.
- وصول Web الواجهة: افتح web قم بتشغيل المتصفح (مثل Chrome أو Firefox) وأدخل عنوان IP الخاص بالكاميرا في شريط العناوين.
- تسجيل الدخول: The default username is typically 'root' and the password is 'pass'. You will be prompted to change the password upon first login for security reasons.
- الإعدادات الأساسية: Configure essential settings such as date/time, network settings (if not using DHCP), and user accounts.
5. التشغيل
5.1 Accessing the Camera Interface
Once configured, you can access the camera's live view and settings through its web interface or compatible VIVOTEK software/NVR systems.
- Enter the camera's IP address in your web المتصفح.
- قم بتسجيل الدخول باستخدام اسم المستخدم وكلمة المرور اللذين قمت بتكوينهما.
- The interface provides access to live video, recording settings, motion detection, and other advanced features.
5.2 Adjusting Lens and Focus
The FD9383-HTV features a motorized varifocal lens, allowing remote adjustment of zoom and focus.
- Navigate to the 'Video' or 'Lens' settings section in the web واجهة.
- Use the zoom controls to adjust the focal length (2.8mm to 12mm) to achieve the desired field of view.
- Utilize the focus controls to sharpen the image. Many VIVOTEK cameras offer a one-touch focus feature for automatic adjustment.
5.3 إعدادات الرؤية الليلية
The camera automatically switches to night vision mode in low-light conditions using its IR LEDs.
- In the 'Image' or 'IR' settings, you can configure the IR illuminator's behavior (e.g., auto, manual on/off).
- Adjust IR intensity if available, to prevent overexposure or underexposure in specific scenarios.
5.4 التسجيل والتخزين
The camera supports various recording methods, including local storage on a microSD card and network video recording (NVR).
- بطاقة MicroSD: Insert a compatible microSD card (up to 1TB) into the camera's slot. Format the card via the web interface. Configure recording schedules and triggers (e.g., continuous, motion-triggered).
- NVR/NAS: Connect the camera to a VIVOTEK NVR or a compatible Network Attached Storage (NAS) device. Configure recording settings on the NVR/NAS.
5.5 اكتشاف الحركة
Configure motion detection to trigger recordings, send alerts, or activate other actions.
- Access the 'Event' or 'Motion Detection' settings in the web واجهة.
- Define detection zones within the camera's field of view.
- اضبط مستويات الحساسية لتقليل الإنذارات الكاذبة.
- Set up actions to be taken when motion is detected (e.g., record video, send email notification).
6. الصيانة
6.1 التنظيف
يساعد التنظيف المنتظم في الحفاظ على جودة الصورة المثلى ويطيل عمر الكاميرا.
- عدسة: Gently wipe the lens with a soft, lint-free cloth. For stubborn dirt, use a lens cleaning solution specifically designed for optical surfaces. Avoid abrasive materials.
- السكن: امسح غلاف الكاميرا بالإعلانamp قماش. لا تستخدم المنظفات أو المذيبات القوية.
- غطاء القبة: If applicable, carefully clean the dome cover to ensure clear visibility.
6.2 تحديثات البرامج الثابتة
Periodically check the VIVOTEK website for firmware updates. Firmware updates often include bug fixes, performance improvements, and new features.
- Download the latest firmware for your FD9383-HTV model from the official VIVOTEK support page.
- الوصول إلى الكاميرا web interface and navigate to the 'System' or 'Maintenance' section.
- Follow the on-screen instructions to upload and install the firmware. Do not power off the camera during the update process.
7. استكشاف الأخطاء وإصلاحها
This section provides solutions to common issues you might encounter with your VIVOTEK FD9383-HTV camera.
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الكاميرا لا تعمل | No power from PoE switch/injector; faulty power adapter; loose cable connection. | Check PoE status on switch; verify power adapter functionality; ensure all cables are securely connected. |
| لا يمكن الوصول إلى الكاميرا عبر الشبكة | Incorrect IP address; network cable issue; firewall blocking access; camera not receiving an IP address. | Verify IP address; check network cable integrity; temporarily disable firewall; use IP Search utility to find camera. |
| جودة الصورة رديئة (ضبابية، داكنة) | Lens out of focus; dirty lens/dome; insufficient lighting; incorrect image settings. | Adjust focus via web interface; clean lens/dome; check IR settings; reset image settings to default. |
| كشف الحركة لا يعمل | Detection zones not configured; sensitivity too low; event actions not set up. | Configure detection zones; increase sensitivity; ensure event actions (e.g., record, notify) are enabled. |
| بطاقة MicroSD لا تسجل | Card not formatted; card full; recording schedule not active; faulty card. | Format microSD card in camera settings; check recording schedule; replace card if faulty. |
8. المواصفات
Detailed technical specifications for the VIVOTEK FD9383-HTV camera.
| ميزة | مواصفة |
|---|---|
| مستشعر الصورة | 1/2.8" Type CMOS |
| دقة | 2560 × 1920 بمعدل 30 إطارًا في الثانية |
| البعد البؤري | 2.8 to 12mm Motorized Varifocal Lens |
| الزاوية الأفقية لـ View | من 95.4 إلى 28.7 درجة |
| الرؤية الليلية | IR LEDs up to 98 feet (30 meters) |
| صوتي | ميكروفون مدمج |
| تخزين | Supports microSD Cards up to 1TB |
| واجهة الشبكة | 1x RJ45 Input (PoE) |
| التقييم البيئي | IP66 (مقاوم للغبار والماء) |
| مقاومة التخريب | IK10-Rated |
| ONVIF Compliance | محترفfiles G, S, T |
| أبعاد المنتج | 5.3 × 4.1 × 4.1 بوصة (13.5 × 10.4 × 10.4 سم) |
| وزن العنصر | 1.9 رطل (0.86 كجم) |
9. الضمان والدعم
VIVOTEK products are covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official VIVOTEK webموقع.
For technical support, product documentation, and software downloads, please visit the VIVOTEK official support portal:
https://www.vivotek.com/support
When contacting support, please have your camera's model number (FD9383-HTV) and serial number ready.