SKYSHL SS103PVC12 Optical Fiber Power Meter User Manual

1. المقدمة

The SKYSHL SS103PVC12 Optical Fiber Power Meter (OPM) is a compact and user-friendly instrument designed for comprehensive testing of fiber optic networks. It facilitates both absolute optical power measurement and relative optical loss measurement. This device is characterized by its robust design, wide power measurement range, high precision, and user self-calibration capabilities, making it a cost-effective solution for fiber optic professionals.

This manual provides detailed instructions for the safe and effective use of your SKYSHL SS103PVC12. Please read it thoroughly before operation and retain it for future reference.

2. معلومات السلامة

يرجى مراعاة احتياطات السلامة التالية لمنع الإصابة وتلف الجهاز:

• سلامة الليزر: The Visual Fault Locator (VFL) emits a visible red laser. لا تحدق مباشرة في شعاع الليزر أو view باستخدام الأدوات البصرية. Direct exposure can cause severe eye injury.
• سلامة البطارية: Use only the specified battery type (3.7V 700mAh lithium battery). Do not disassemble, puncture, or expose the battery to extreme temperatures or fire. Dispose of batteries according to local regulations.
• الظروف البيئية: Operate the device within specified temperature and humidity ranges. Avoid exposure to water, dust, and corrosive substances.
• تنظيف: Use a soft, dry cloth for cleaning the device. For optical connectors, use specialized fiber optic cleaning tools.
• صيانة: لا تحاول فتح أو إصلاح الجهاز بنفسك. أحل جميع أعمال الصيانة إلى فنيين مؤهلين.

3. محتويات العبوة

تأكد من وجود جميع العناصر في العبوة:

• 1 x SKYSHL SS103PVC12 Optical Fiber Power Meter
• 1 x USB-A to Micro USB Charging Cable
• 1 x FC-LC Adapter
• 1 × دليل المستخدم (هذه الوثيقة)

4. انتهى المنتجview

The SKYSHL SS103PVC12 is an all-in-one tool for fiber optic network testing. It combines an Optical Power Meter (OPM), a Visual Fault Locator (VFL), an RJ45 cable tester, and an LED flashlight.

4.1 الميزات الرئيسية

• Multi-Wavelength Calibration: Supports 10 calibrated wavelengths: 850nm, 980nm, 1270nm, 1300nm, 1310nm, 1490nm, 1550nm, 1577nm, 1625nm, and 1650nm, suitable for both single-mode and multi-mode fiber testing.
• نطاق قياس واسع: Measures optical power from -50dBm to +26dBm.
• Integrated VFL: 650nm red laser with a 30km range for identifying fiber breaks and continuity.
• RJ45 Cable Tester: For quick localization and testing of 8P/6P/4P network cables.
• Universal Connector Compatibility: Features a 2.5mm universal connector (compatible with FC/SC/ST) and includes an FC-LC adapter for LC connectors.
• عمر بطارية طويل: Powered by a 3.7V 700mAh lithium battery, providing over 120 hours of typical operation.
• تصميم مدمج ومتين: Ergonomic, portable, and built with high-strength plastic casing for resilience.
• شاشة إل سي دي 2 بوصة: Clear and easy-to-read interface.

4.2 تخطيط الجهاز

5. الإعداد

5.1 شحن البطارية

The device is powered by a built-in 3.7V 700mAh lithium battery. Before first use, or when the battery indicator on the display shows low charge, connect the device to a USB power source using the provided Micro USB cable. The power button will illuminate red during charging.

5.2 توصيل كابلات الألياف الضوئية

1. تأكد من نظافة موصل الألياف الضوئية. استخدم أداة تنظيف الألياف الضوئية إذا لزم الأمر.
2. For FC, SC, or ST connectors, directly insert them into the 2.5mm universal port on the top of the device.
3. For LC connectors, attach the provided FC-LC adapter to the universal port, then insert the LC connector into the adapter.
4. تأكد من وجود اتصال آمن لمنع القراءات غير الدقيقة.

5.3 Connecting RJ45 Cables

1. Detach the small RJ45 module from the side of the main unit.
2. Connect one end of the RJ45 cable to the port on the main unit.
3. Connect the other end of the RJ45 cable to the detached module.
4. Proceed to the operating instructions for RJ45 cable testing.

6. تعليمات التشغيل

6.1 تشغيل/إيقاف التشغيل

• للتشغيل ، اضغط مع الاستمرار على زر الطاقة (red button with power symbol) for approximately 2 seconds.
• لإيقاف التشغيل ، اضغط مع الاستمرار على زر الطاقة again for approximately 2 seconds.
• The device features an automatic power-off function after 10 minutes of inactivity to conserve battery.

6.2 Optical Power Measurement (OPM)

1. حدد الطول الموجي: اضغط على λ (Wavelength) Button to cycle through the available calibrated wavelengths (850nm, 980nm, 1270nm, 1300nm, 1310nm, 1490nm, 1550nm, 1577nm, 1625nm, 1650nm). Select the wavelength corresponding to your fiber optic system.
2. توصيل الألياف: Connect the fiber optic cable to the appropriate port as described in Section 5.2.
3. Read Absolute Power: The display will show the measured optical power in dBm.
4. Set Reference (Relative Measurement):
   • With a known good signal connected, press the REF/dB Button to set the current power reading as the reference value (0.00dB).
   • When measuring other points in the fiber link, the display will show the relative loss or gain in dB compared to the set reference.
   • اضغط على REF/dB Button again to toggle between absolute (dBm) and relative (dB) measurements.

6.3 محدد الأعطال المرئي (VFL)

• Activate VFL: اضغط على VFL Button. The 650nm red laser will emit from the VFL port (located near the fiber optic input ports).
• Identify Faults: Connect the fiber to be tested to the VFL port. Observe the fiber for any visible red light leakage, which indicates breaks, sharp bends, or faulty connectors.
• Deactivate VFL: اضغط على VFL Button again to turn off the laser.
• حذر: Always follow laser safety guidelines (Section 2).

6.4 RJ45 Cable Tester

• Ensure the RJ45 cable is connected to both the main unit and the detached module as described in Section 5.3.
• The device will automatically begin testing the cable continuity. The display will show the status of each wire pair (1-8 for 8P, 1-6 for 6P, 1-4 for 4P).
• A successful test will show all corresponding numbers lighting up sequentially or indicating continuity. Any missing or incorrect sequence indicates a fault (e.g., open, short, cross).

6.5 مصباح LED

• اضغط على زر LED to turn the integrated LED flashlight on or off. This is useful for working in dimly lit environments.

7. الصيانة

• تنظيف الموصلات الضوئية: Regularly clean the fiber optic input ports and any adapters using specialized fiber optic cleaning swabs or pens. Dust and debris are the primary causes of inaccurate measurements.
• تنظيف الجهاز: امسح الجزء الخارجي من الجهاز بقطعة قماش ناعمة وجافة وخالية من الوبر. لا تستخدم المنظفات الكاشطة أو المذيبات.
• العناية بالبطارية: For optimal battery life, avoid fully discharging the battery frequently. If storing the device for an extended period, charge it to approximately 50% and recharge every few months.
• تخزين: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Use the protective caps for all ports when not in use.

8. استكشاف الأخطاء وإصلاحها

If the problem persists after attempting these solutions, please contact SKYSHL customer support for assistance.

9. المواصفات

10. الضمان والدعم

SKYSHL provides the following warranty for the SS103PVC12 Optical Fiber Power Meter:

• 3 Years Free Replacement
• 5 Years Free Maintenance
• ضمان مدى الحياة

For technical support, warranty claims, or any inquiries regarding your device, please contact SKYSHL customer service through the retailer where you purchased the product or visit the official SKYSHL webموقع لمعلومات الاتصال.