ONKRON TS1140-W TV Floor Stand Instruction Manual

مقدمة

The ONKRON TS1140-W TV Floor Stand is designed to securely hold televisions ranging from 26 to 65 inches, with a maximum weight capacity of 35 kg. This stand offers a versatile alternative to wall mounting, eliminating the need for drilling. It features height adjustability and integrated cable management for a clean setup.

Image: The ONKRON TS1140-W TV Floor Stand is compatible with TVs from 26 to 65 inches and supports a maximum weight of 35 kg.

معلومات السلامة

• اقرأ جميع التعليمات جيداً قبل التجميع والاستخدام.
• لا تتجاوز الحد الأقصى للوزن وهو 35 كجم (77 رطل).
• Ensure your TV's VESA mounting pattern is compatible (100x100mm to 400x400mm).
• Assemble the stand on a soft, clean surface to prevent scratches to components or flooring.
• Always use two people for lifting and mounting the television to prevent injury or damage.
• Ensure all screws are tightened securely before placing the TV on the stand and before use.
• For additional stability, especially in households with children or pets, consider attaching the stand to the wall using the provided safety cable.
• احتفظ بالأجزاء الصغيرة ومواد التغليف بعيدًا عن متناول الأطفال.

محتويات الحزمة

Please verify that all components listed below are present in your package. Refer to the image for a visual guide to the included parts and hardware.

الصورة: أكثر منview of all parts and hardware included in the ONKRON TS1140-W TV Floor Stand package.

• قاعدة (1)
• Main Column (1)
• حوامل تثبيت التلفزيون (2)
• Hardware Kit (various screws, washers, spacers for TV mounting)
• أدوات التجميع (مفاتيح الربط، مفاتيح ألين)
• Cable Management System Components
• كابل امان (1)
• Soft Inserts for TV protection

تعليمات التجميع

1. Attach the Base to the Main Column: Secure the base to the bottom of the main column using the provided screws and tools. Ensure all connections are firm and stable.
2. تركيب حوامل تثبيت التلفزيون: Attach the vertical TV mounting brackets to the main column. These brackets will serve as the attachment point for your television.
3. جهّز جهاز التلفزيون الخاص بك:
   • ضع التلفاز بعناية على سطح ناعم ونظيف بحيث يكون وجهه لأسفل لمنع تلف الشاشة.
   • قم بتحديد فتحات التثبيت VESA الموجودة على الجزء الخلفي من التلفزيون الخاص بك.
   • Select the appropriate screws, washers, and spacers from the hardware kit that match your TV's VESA pattern and depth.
   • Attach the TV mounting arms to the back of your TV. Ensure they are securely fastened but do not overtighten.
4. قم بتثبيت التلفزيون على الحامل:
   • With assistance from another person, carefully lift the TV and hook the TV mounting arms onto the vertical brackets on the main column.
   • Secure the TV to the stand using the locking screws or mechanisms provided.
   • Gently test the stability of the mounted TV before releasinشخص سخيف.
5. إدارة الكابلات: Route your TV cables through the integrated cable management system within the main column to maintain a tidy and organized appearance.
6. تركيب اختياري على الحائط: For enhanced stability and safety, especially in active environments or with heavier TVs, use the included safety cable to secure the top of the stand to a wall stud.

تعليمات التشغيل

ضبط الارتفاع: The ONKRON TS1140-W TV Floor Stand offers height adjustment from 880 mm to 1100 mm. To adjust the TV height, carefully loosen the securing bolts on the main column. With assistance, gently raise or lower the TV to your desired viewing position, then securely tighten the bolts. Always ensure the TV is level after adjustment.

Image: The stand allows for height adjustment of the TV from 88 cm to 110 cm.

صيانة

• Regularly check all screws and connections to ensure they remain tight and secure. Loose connections can compromise stability.
• Clean the stand with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
• Inspect the stand periodically for any signs of wear, damage, or deformation. Do not use the stand if any damage is observed.

استكشاف الأخطاء وإصلاحها

• Stand is wobbly or unstable:
  • تأكد من ربط جميع مسامير التجميع بشكل كامل.
  • Verify that the TV weight does not exceed the maximum capacity of 35 kg.
  • Check that the stand is placed on a flat, level, and stable surface.
  • Consider using the provided safety cable to anchor the stand to the wall for enhanced stability.
• TV does not fit the VESA mount:
  • Confirm your TV's VESA mounting pattern is within the specified range of 100x100mm to 400x400mm.
  • Ensure you are using the correct screws, washers, and spacers from the hardware kit that match your TV's specific requirements.
• صعوبة تعديل الارتفاع:
  • Loosen the height adjustment bolts sufficiently before attempting to move the TV.
  • Ensure no cables are snagged or obstructing the movement mechanism within the column.

تحديد

Image: The stand features universal VESA compatibility from 100x100mm to 400x400mm, with base dimensions of 61.8 cm width and 25.7 cm depth.

الضمان والدعم

تخضع منتجات ONKRON لعمليات متعددةtage quality control to ensure reliability and customer satisfaction. For any questions, assistance with assembly, missing parts, or support needs, please contact ONKRON customer service. Refer to your purchase documentation or the official ONKRON webالموقع للحصول على تفاصيل الضمان المحددة ومعلومات الاتصال.