HOTA D6 Pro Dual Port Smart Balance Charger

1. المقدمة

The HOTA D6 Pro is a versatile dual-port smart balance charger designed for a wide range of RC batteries. It supports both AC and DC input, features wireless charging, and offers an intelligent upgrade system for optimal performance. This manual provides essential information for safe and efficient operation of your charger.

2. معلومات السلامة

Always read and understand all instructions and warnings before using this product. Failure to do so may result in fire, injury, or property damage. Keep the charger away from children. Do not disassemble this product. Do not expose the product to heat, fire, or any extreme environment. After charging is complete, unplug the charger from the power source. Children must be supervised by adults when using the charger. In the case of AC connection, the DC input port is prohibited.

The HOTA D6 Pro includes comprehensive protection features:

• حماية من الحرارة الزائدة
• Time-exceeding protection
• Capacity protection
• حماية عكسي الإدخال
• حماية الانتاج
• حماية من الدوائر القصيرة
• Output current protection
• Over output voltagالحماية الإلكترونية
• حماية من الشحن الزائد

3. انتهى المنتجview

The HOTA D6 Pro features a large IPS screen for faster response, wider viewing angles, and true color display. It offers dual-channel output for efficient charging and supports a variety of battery chemistries.

3.1. الميزات الرئيسية

• Dual Channel Output: Highly optimized charging algorithm with efficiency up to 94%, supporting max. 650W charging and external discharging.
• Wireless Charging: Patented design for convenient charging of compatible mobile devices (e.g., iPhoneX, iPhone8, Samsung S8).
• Intelligent Upgrade: Built-in Micro USB connector for easy and fast firmware updates.
• Wide Battery Compatibility: Supports LiHv/LiPo/LiFe/Li-ion/Lixx (1-6S), NiZn/Nicd/NiMH (1-16S), Smart Battery (1-6S), Lead Acid(Pb) (2-24V), and Enelop (1-16S).
• Advanced Safety: Incorporates multiple protection mechanisms for reliable charging and discharging.

3.2. المكونات والمنافذ

يتميز الشاحن بما يلي:

• ميناء العاصمة: لإدخال طاقة التيار المستمر.
• منفذ التيار المتردد: For AC power input.
• وسادة الشحن اللاسلكي: Located on top for compatible devices.
• Channel Switch (CH): Button to switch between charging channels.
• Speed Shuttle Key: Rotary encoder for menu navigation and selection.
• مخرج يو اس بي: 5V / 2.1A for charging external devices.
• منفذ التحديث: Micro USB for firmware upgrades.
• Balance Ports (CH1 & CH2): لتوصيل أسلاك موازنة البطارية.
• Battery Ports (CH1 & CH2): For connecting main battery leads (XT60 type).

4. الإعداد

4.1. التشغيل الأولي

1. Connect the charger to a suitable power source using either the AC input cable or a DC power supply.
2. The display will light up, indicating the charger is ready for operation.

4.2. إعدادات اللغة

لتغيير لغة العرض:

1. Long press the right wheel button (Speed Shuttle Key) for 2 seconds to enter the system settings.
2. Navigate to "Language" using the wheel.
3. Select your desired language to confirm.

4.3. توصيل البطارية

Ensure the battery type and cell count match the charger settings before connecting. Always connect the main battery lead first, then the balance lead.

5. تعليمات التشغيل

5.1. الشحن الأساسي

1. Connect your battery to the appropriate channel (CH1 or CH2) by plugging the main power connector (e.g., XT60) into the battery port and the balance lead into the balance port.
2. Use the 'CH' button to select the desired channel.
3. Press the Speed Shuttle Key to enter task settings.
4. Select 'Charge' as the task type.
5. Choose the correct 'Battery type' (e.g., LiPo, LiHv, NiMH).
6. Set the 'Cell voltage' (e.g., 4.20V for LiPo).
7. Verify the 'Cell count' (the charger often auto-detects this).
8. Adjust the 'Current setting' (charge rate) according to your battery's specifications. A common safe rate is 1C (e.g., 1.8A for an 1800mAh battery).
9. Select 'Start task' to begin charging. The display will show real-time charging status, including individual cell voltagإِسْ

5.2. Storage Charging/Discharging

For long-term battery health, it is recommended to store LiPo batteries at a specific voltage (typically 3.80V-3.85V per cell). The HOTA D6 Pro can automatically adjust the battery to this level.

1. Connect your battery as described in section 5.1.
2. Enter task settings and select 'Storage'.
3. The charger will automatically charge or discharge the battery to the preset storage voltage. You can adjust the target storage voltagالبريد إذا لزم الأمر.
4. Select 'Start task'. The display will indicate 'Storage discharge' or 'Storage charge' as it balances the cells.

5.3. الشحن اللاسلكي

The HOTA D6 Pro features a wireless charging pad on its top surface.

Simply place a compatible smartphone (e.g., iPhoneX, iPhone8, Samsung S8) on the charging pad to initiate wireless charging.

5.4. ترقية البرامج الثابتة

Keep your charger up-to-date with the latest features and improvements.

Connect the charger to a computer using a Micro USB cable via the update port. Follow the instructions provided by the HOTA firmware update software.

5.5. فيديو تعليمي

6. الصيانة

• حافظ على الشاحن نظيفاً وخالياً من الغبار والأوساخ. استخدم قطعة قماش ناعمة وجافة للتنظيف.
• قم بتخزين الشاحن في مكان بارد وجاف بعيدًا عن أشعة الشمس المباشرة والرطوبة.
• Regularly inspect all cables and connectors for any signs of damage. Replace damaged components immediately.
• Ensure proper ventilation around the charger during operation to prevent overheating.

7. استكشاف الأخطاء وإصلاحها

• الشاحن لا يعمل: Check all power connections (AC or DC input). Ensure the power source is active.
• لم يتم اكتشاف البطارية: Verify that the main battery lead and balance lead are securely connected to the correct ports. Check for any damage to the battery or connectors.
• Charging error message: Refer to the charger's display for specific error codes. Common issues include incorrect battery type/cell count settings, overvoltagه / سفولtage, or short circuits. Adjust settings or inspect the battery as needed.
• الشحن اللاسلكي لا يعمل: Ensure your device is compatible with wireless charging and is placed correctly on the charging pad.
• ارتفاع درجة حرارة الشاحن: Ensure adequate ventilation. Reduce the charge current if necessary. If the issue persists, discontinue use and contact support.

8. المواصفات

9. الضمان والدعم

للحصول على معلومات الضمان أو الدعم الفني، يرجى الاتصال بالبائع أو الشركة المصنعة مباشرةً. احتفظ بإثبات الشراء لتقديم أي مطالبات ضمان.