Creality Space Pi Filament Dryer Plus User Manual

1. المقدمة

The Creality Space Pi Filament Dryer Plus is designed to maintain optimal filament conditions for 3D printing. It effectively removes moisture from various filament types, improving print quality and preventing common issues like stringing, clogging, and poor layer adhesion. This manual provides essential information for the safe and efficient operation of your device.

2. معلومات السلامة

Please read all safety instructions before operating the device to prevent injury or damage.

• لا تعرض الجهاز للماء أو الرطوبة.
• تأكد من أن مصدر الطاقة يتوافق مع متطلبات الجهاز.
• احفظ الجهاز بعيدًا عن المواد القابلة للاشتعال.
• Do not block ventilation openings during operation.
• افصل الجهاز قبل التنظيف أو الصيانة.
• لا تحاول تفكيك الجهاز أو إصلاحه بنفسك. اتصل بدعم العملاء للحصول على المساعدة.
• قم بتشغيل الجهاز في منطقة جيدة التهوية.
• يحفظ بعيدًا عن متناول الأطفال.

3. محتويات العبوة

تأكد من وجود جميع العناصر في العبوة:

• Creality Space Pi Filament Dryer Plus Unit
• محول الطاقة
• دليل المستخدم
• PTFE Tubing (for direct feeding to printer)

4. مواصفات المنتج

• Dual Roll Capacity: Supports two 1kg filament rolls (1.75mm or 2.85mm) simultaneously, with four filament outlets for multi-printer setups.
• PTC 360° Hot Air Heating: Equipped with a 110W PTC heater and built-in fan for uniform heat distribution, preventing uneven drying and moisture-related printing issues.
• درجة حرارة قابلة للتعديل: Freely adjustable drying temperature from 45℃ to 70℃.
• Adjustable Drying Time: Set drying duration from 0 to 48 hours for effective moisture removal.
• شاشة لمس LCD مقاس 3.7 بوصات: Provides real-time monitoring of humidity and temperature, allowing precise control over the drying process.
• One-Click Presets: Easy one-click setting for drying parameters of up to 12 common filament types (PLA, TPU, PP, ABS, ASA, PETG, PC, PA, PET, PLA-CF, PETG-CF, PA-CF).
• Parameter Power-Off Memory: Retains previous material and temperature settings after a power interruption, eliminating the need for reset.

Image: Creality Space Pi Filament Dryer Plus showing its main features including dual roll capacity, temperature control, drying time, PTC heating, and one-key presets.

5. الإعداد

1. فك التعبئة: Carefully remove the filament dryer from its packaging and ensure all components are present.
2. الموقع: Place the dryer on a stable, flat surface in a well-ventilated area, away from direct sunlight or heat sources.
3. توصيل الطاقة: Connect the power adapter to the dryer's power input port, then plug the adapter into a suitable power outlet.
4. جارٍ تحميل خيوط الطباعة ثلاثية الأبعاد:
   • Open the top cover of the dryer.
   • ضع بكرة أو بكرتين من خيوط الطباعة على البكرات الداخلية. تأكد من أن الخيط ينفك بسلاسة.
   • If using for direct printing, feed the filament through one of the designated outlets and connect it to your 3D printer's extruder.
   • أغلق الغطاء العلوي بإحكام.

Image: The filament dryer supporting two rolls and feeding filament to two separate 3D printers.

6. تعليمات التشغيل

1. تشغيل الطاقة: Press the power button on the device. The LCD touch screen will illuminate.
2. LCD Touch Screen Overview: The 3.7-inch LCD displays real-time temperature, humidity, and drying countdown. Use the touch controls to navigate settings.
3. Selecting Filament Type (One-Click Presets):
   • On the main screen, select the 'Material' option.
   • Choose from the 12 pre-set filament types (e.g., PLA, ABS, PETG). The device will automatically apply recommended temperature and time settings.
4. Manual Temperature Adjustment:
   • If manual adjustment is desired, select the 'Temperature' setting.
   • Use the up/down arrows to set the desired temperature between 45℃ and 70℃.
5. Manual Drying Time Adjustment:
   • Select the 'Time' setting.
   • Use the up/down arrows to set the desired drying duration between 0 and 48 hours.
6. Starting/Stopping Drying:
   • Once settings are confirmed, press the 'Start' button (usually a play/power icon) to begin the drying process.
   • To stop drying, press the 'Stop' button (usually a pause/power icon).
7. Parameter Power-Off Memory: The device automatically saves your last settings. If power is interrupted, it will recall these settings upon restart.

Image: Close-up of the LCD touch screen interface showing drying countdown, real-time temperature, and humidity.

Recommended Drying Temperatures for Filaments

Table: Recommended drying temperatures and times for various filament types.

7. الصيانة

• تنظيف: Ensure the device is unplugged and cooled down before cleaning. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• التنظيف الداخلي: Periodically check the internal rollers and filament path for any dust or filament debris. Clean gently with a soft brush or compressed air if necessary.
• Desiccant Compartment: The dryer features a dual desiccant storage compartment. While the device actively dries filament, you can also place desiccant packs in this compartment for passive moisture absorption when the device is off or for long-term storage. Replace desiccant packs as needed.
• تخزين: When not in use for extended periods, unplug the device and store it in a dry, dust-free environment.

Image: Details of the dryer, including the power switch, moisture-proof silicone plug, and dual desiccant storage.

8. استكشاف الأخطاء وإصلاحها

• الجهاز لا يعمل:
  • Check if the power adapter is securely connected to both the device and the power outlet.
  • تأكد من أن منفذ الطاقة يعمل بشكل صحيح.
• عدم جفاف الخيوط بشكل فعال:
  • Verify that the correct filament type and corresponding temperature/time settings are selected. Refer to the recommended drying temperatures table.
  • Ensure the top cover is securely closed to maintain internal temperature and humidity.
  • For very wet filament, a longer drying time may be required.
• "EA" Error Displayed (Low Ambient Temperature):
  • If the ambient room temperature is below approximately 15℃, the device may display an "EA" error and not operate.
  • To resolve this, warm the room or the interior of the dryer (e.g., by placing it in a warmer area) until the internal temperature rises above the threshold.
• Filament Not Feeding Smoothly:
  • Check for any tangles or knots on the filament spool.
  • Ensure the filament path through the dryer outlets and to the printer is clear and unobstructed.
  • Inspect the internal rollers for debris that might impede spool rotation.
• شاشة اللمس لا تستجيب:
  • Gently clean the screen surface with a soft, dry cloth.
  • Try restarting the device by unplugging and re-plugging the power.

9. المواصفات

10. الضمان والدعم

للحصول على معلومات الضمان أو الدعم الفني أو الاستفسارات المتعلقة بالخدمة، يرجى الاتصال بدعم عملاء Creality من خلال موقعهم الرسمي. website or the retailer where the product was purchased. Please have your product model number (Space Pi Plus) and purchase details available when contacting support.