KINGGERI KG2-7711
KINGGERI Lockable Roof Rack Cross Bars Instruction Manual
Model: KG2-7711
Brand: KINGGERI
1. المقدمة
Thank you for choosing KINGGERI Lockable Roof Rack Cross Bars. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new roof rack system. Designed for durability and security, these cross bars enhance your vehicle's cargo carrying capabilities.
The KINGGERI roof rack cross bars are engineered with a metal mechanism lock system for enhanced anti-theft security and boast a maximum load capacity of 260 lbs (118 kg). The aerodynamic design helps to minimize wind resistance and noise during travel.

Image 1.1: KINGGERI Lockable Roof Rack Cross Bars on a Ford Explorer.
2. توافق السيارة
These KINGGERI roof rack cross bars are specifically designed as replacements for the following Ford Explorer models:
- Ford Explorer 2020
- Ford Explorer 2021
- Ford Explorer 2022
- Ford Explorer 2023
- Ford Explorer 2024
- Ford Explorer 2025
Important: This product is compatible ONLY with Ford Explorer models equipped with RAISED SIDE ROOF RAILS. Please verify your vehicle's roof rail type before installation.

Image 2.1: Compatibility illustration for Ford Explorer models with raised side rails.
3. ماذا يوجد في الصندوق
Please ensure all components listed below are present before beginning installation:
- Front Crossbar (1) - أطول
- Rear Crossbar (1) - أقصر
- بين قوسين (4)
- دليل التعليمات (1)
- مفتاح ألين (2)
- مجموعة براغي
- Spare Screws (set)
- مفاتيح (2)

Image 3.1: Package contents of the KINGGERI Roof Rack Cross Bars.
4. الإعداد والتثبيت
Installation of the KINGGERI roof rack cross bars is designed to be straightforward. Follow these steps carefully:
- تحديد القضبان الأمامية والخلفية: The front crossbar is longer than the rear crossbar to accommodate the vehicle's roof curvature. The bars are labeled 'Front' and 'Rear' to assist with correct placement.
- ربط الأقواس: Securely attach the four brackets to the ends of the crossbars using the provided screws and Allen wrench. Ensure the brackets are oriented correctly to clamp onto your vehicle's raised side rails.
- Position Crossbars: Place the assembled front crossbar onto the front section of your vehicle's raised side rails. Repeat for the rear crossbar.
- ضبط العرض: The width of each crossbar can be adjusted to fit your vehicle's specific dimensions. Slide the brackets along the crossbar until they align perfectly with your vehicle's side rails.
- Secure to Side Rails: Using the heavy-duty clamping design, securely fasten the brackets to the existing side rails. Tighten all screws evenly until the crossbars are firmly in place and do not move.
- قفل النظام: Utilize the metal mechanism lock system on each bracket to secure the crossbars and deter theft. Use the provided keys to lock and unlock.
- التحقق النهائي: Before driving, gently shake each crossbar to ensure it is securely mounted and there is no excessive movement.
Caution: Do not overtighten screws. Ensure all components are properly aligned and secured before use.
5. إرشادات التشغيل
5.1 سعة التحميل
The KINGGERI roof rack cross bars have a maximum load capacity of 260 رطل (118 كجم). Do not exceed this weight limit. Distribute the load evenly across the cross bars to maintain vehicle stability and prevent damage.
5.2 Securing Cargo
The four brackets of the KINGGERI roof luggage rack crossbar are designed with integrated tie-down loops. These loops can accommodate ropes or straps up to 1/4" (6mm) wide, allowing for easy and secure fastening of cargo.

Image 5.1: Detail of the integrated tie-down loop.
5.3 ميزة مكافحة السرقة
The cross bars are equipped with an anti-theft lock system. Always lock the cross bars when not in use or when carrying valuable cargo to prevent unauthorized removal.

Image 5.2: Anti-theft lock mechanism.
5.4 Aerodynamic Design
The aerodynamic profile of the cross bars is designed to effectively reduce wind resistance and noise, contributing to a quieter driving experience, especially at higher speeds.

Image 5.3: Cross bars with aerodynamic design carrying skis.
5.5 الاستخدام المتنوع
These cross bars are suitable for carrying various types of gear, including but not limited to:
- Kayak Racks
- Bicycle Stands
- Cargo Boxes
- Ski Frames

الصورة 5.4: مثالamples of gear that can be carried with the cross bars.
6. الصيانة
To ensure the longevity and optimal performance of your KINGGERI roof rack cross bars, follow these maintenance guidelines:
- التنظيف المنتظم: Clean the cross bars periodically with mild soap and water. Avoid abrasive cleaners or solvents that could damage the finish.
- فحص المثبتات: Before each use, especially after long trips or carrying heavy loads, inspect all screws and clamps to ensure they are tight and secure. Retighten if necessary.
- التحقق من الضرر: Regularly check the cross bars and brackets for any signs of wear, cracks, or damage. Replace any damaged components immediately.
- تشحيم: Periodically apply a small amount of lubricant to the lock mechanism to ensure smooth operation.
- تخزين: If removing the cross bars for extended periods, store them in a dry, clean place away from direct sunlight and extreme temperatures.
7. استكشاف الأخطاء وإصلاحها
7.1 Excessive Wind Noise
- سبب: تركيب غير صحيح أو مكونات مفكوكة.
- حل: تأكد من كل clamps and screws are tightened securely. Verify that the front and rear bars are installed in their correct positions (front bar is longer).
7.2 Cross Bars Feel Loose
- سبب: Screws or clampلم يتم إحكام ربطها بشكل كافٍ.
- حل: Re-tighten all screws and clamps using the provided Allen wrench until the bars are firm. Do not overtighten.
7.3 Difficulty Locking/Unlocking
- سبب: Debris in the lock mechanism or lack of lubrication.
- حل: Clean the lock mechanism and apply a small amount of lubricant. Ensure the key is fully inserted and turned correctly.
8. المواصفات
| ميزة | التفاصيل |
|---|---|
| ماركة | KINGGERI |
| رقم الموديل | KG2-7711 |
| مادة | High-grade Aluminum (Brackets and Bars) |
| سعة التحميل | 260 رطل (118 كجم) |
| أبعاد المنتج | 41 × 4 × 6 بوصة (تقريبًا، مع التغليف) |
| وزن العنصر | 15 رطل |
| لون | أسود |
| نوع التركيب | Clamp Mount, Crossbar Mount, Rails, Roof Mount |
| ميزة مكافحة السرقة | Metal Mechanism Lock System |
| حلقات الربط | Integrated on all four brackets (accommodates up to 1/4" / 6mm rope) |

Image 8.1: Material and design comparison.
9. الضمان والدعم
KINGGERI Roof Rack Cross Bars come with a ضمان لمدة 12 شهرًا يسري هذا الضمان من تاريخ الشراء، ويغطي عيوب التصنيع وعيوب المواد في ظل الاستخدام العادي.
If you encounter any concerns, questions, or require assistance with your product, please do not hesitate to contact KINGGERI customer support. Refer to your purchase documentation or the retailer's webالموقع للحصول على معلومات الاتصال المحددة.
For more information about KINGGERI products, you may visit the official brand page on Amazon: KINGGERI Brand Store
المستندات ذات الصلة - KG2-7711
![]() |
KINGGERI Lockable Roof Rack Cross Bars Installation Guide for Ford Explorer Detailed installation instructions for KINGGERI Lockable Roof Rack Cross Bars, designed for Ford Explorer models. Includes parts identification, step-by-step assembly, and safety tips. |
![]() |
KINGGERI Lockable 260lbs Roof Rack Cross Bars Installation Guide for Ford Explorer 20 Step-by-step installation instructions for KINGGERI Lockable 260lbs Roof Rack Cross Bars, designed for Ford Explorer 20 models. Includes important safety notes and assembly guidance. |
![]() |
KINGGERI 1-084 Roof Rack Cross Bars Installation Guide Step-by-step installation instructions for the KINGGERI 1-084 Lockable Roof Rack Cross Bars, designed for vehicles like the Ford Explorer. Includes kit contents, safety tips, and detailed assembly guidance. |
![]() |
KINGGERI Lockable Roof Rack Cross Bars Installation Instructions (Part 1-91) Detailed installation guide for KINGGERI Lockable Roof Rack Cross Bars (Part 1-91), designed for vehicles like Ford Explorer. Includes kit contents, step-by-step instructions, and safety tips. |
![]() |
دليل مستخدم ماكينة تحضير القهوة الفردية Mr. Coffee BVMC-KG2 دليل المستخدم لماكينة تحضير القهوة الفردية Mr. Coffee BVMC-KG2، والذي يوفر معلومات حول الإعداد والتشغيل والتنظيف والصيانة واستكشاف الأخطاء وإصلاحها والضمان. |
![]() |
DITEK DTK-KG2 KoolGuard Installation Instructions Installation and operation guide for the DITEK DTK-KG2 KoolGuard voltage protection device, including wiring instructions, LED indicator status guide, and troubleshooting information. |
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.





