STC-3008, 3018, 3028 Dual Digital Temperature Controller Hygrometer User Manual

مقدمة

This manual provides detailed instructions for the installation, operation, and maintenance of the IXITAB STC-3008, STC-3018, and STC-3028 series of digital temperature and humidity controllers. These devices are designed for precise control in various applications, including aquariums, terrariums, incubators, and industrial temperature/humidity control systems.

متغيرات المنتجات

• STC-3008: Dual Digital Temperature Controller with two temperature probes.
• STC-3018: Dual Digital Temperature Controller with two temperature probes.
• STC-3028: Digital Temperature and Humidity Controller with one combined temperature and humidity sensor.

الميزات الرئيسية

• Dual display for simultaneous monitoring of two temperatures or temperature and humidity.
• Two independent relay outputs for controlling heating/cooling or humidification/dehumidification devices.
• Wide range of power supply options (AC 110V/220V, DC 12V/24V) depending on the model.
• High precision sensors for accurate readings.
• User-friendly interface for setting parameters.

احتياطات السلامة

لضمان التشغيل الآمن ومنع تلف الجهاز، يرجى مراعاة الاحتياطات التالية:

• افصل التيار الكهربائي دائمًا قبل القيام بأي أعمال توصيل أو صيانة.
• تأكد من أن مصدر الطاقة في مستوى الصوتtage matches the requirements of your specific controller model.
• Strictly distinguish the interface of the relay, sensor, and power connections to avoid short circuits or damage.
• تأكد من أن جميع توصيلات الأسلاك آمنة ومعزولة بشكل صحيح.
• Keep the sensor and power wires separate and maintain a proper distance to prevent interference.
• لا تعرض الجهاز للماء أو الرطوبة الزائدة.

الصورة: أعلى view of the STC-3018 controller showing the display, buttons, and a label with wiring instructions and safety notes. The label indicates power supply options (110-220VAC, 12V, 24V) and relay outputs (10A/220VAC). A temperature probe is connected to the device.

المنتج انتهىview

عناصر

• Main Controller Unit (with digital displays and control buttons)
• Temperature Sensor (for STC-3008/3018 models)
• Temperature and Humidity Sensor (for STC-3028 model)

الصورة: الجبهة view of the STC-3008 DC 24V model, featuring two digital displays (red and blue) showing temperature readings, and two connected temperature probes. The model name "STC-3008" is visible on the front panel.

Image: A collage showing three different models: STC-3018 (top left), STC-3008 (top right and bottom left), and STC-3028 (bottom right). Each model is shown with its respective sensor, highlighting the visual differences and sensor types (temperature probe for 3008/3018, combined temperature/humidity sensor for 3028).

الصورة: لقطة مقربة view of the STC-3028 model, showcasing its dual digital display for temperature and humidity, along with the connected combined temperature and humidity sensor.

تحديد

التركيب والتوصيلات

مهم: Ensure power is disconnected before performing any wiring to prevent electric shock or damage to the device.

مخطط الأسلاك

Image: Detailed wiring diagram for the STC-3018 model. It illustrates connections for power supply (110V/AC220V, 12V, 24V), two sensor inputs, and two relay outputs (10A/220VAC). Examples of connected loads like a refrigerator, fan, and water heater are shown.

خطوات الأسلاك

1. مزود الطاقة: Connect the appropriate power supply (AC 110V/220V or DC 12V/24V) to terminals 1 and 2. Verify that the voltage matches your specific controller model.
2. أجهزة الاستشعار: Connect the temperature sensors to terminals 3 and 4, and 5 and 6 (for STC-3008/3018). For the STC-3028, connect the combined temperature/humidity sensor to its designated terminals.
3. مرحلات الإخراج: Connect your heating/cooling or humidification/dehumidification devices to terminals 7 and 8 (Relay 1) and 9 and 10 (Relay 2). These are dry contacts, meaning they act as switches, and your load will require its own power source.
4. التركيب: The controller is designed for panel mounting. Insert the unit into a suitable cutout and secure it using the integrated clips on the sides.

تعليمات التشغيل

وظائف الأزرار

• زر الضبط: يُستخدم للدخول إلى وضع ضبط المعلمات وتأكيد الاختيارات.
• زر الأعلى (▲): Increases values, navigates through menu options.
• زر الأسفل (▼): Decreases values, navigates through menu options.
• Rst Button: اضغط لفترة قصيرة على view current settings; long press (3 seconds) to reset to factory default settings.

Temperature/Humidity Setting

Image: A visual guide demonstrating the temperature and humidity setting process on the STC-3028 model. It shows how to set starting and stopping values for both temperature (heating/cooling) and humidity (humidification/dehumidification) using the control buttons.

1. Setting Starting Temperature/Humidity: اضغط لفترة طويلة على أعلى (▲) button for 3 seconds. The starting value on the display will flash. Use the أعلى (▲) or لأسفل (▼) buttons to adjust to your desired starting value. Press the تعيين زر للتأكيد والخروج.
2. Setting Stopping Temperature/Humidity: اضغط لفترة طويلة على لأسفل (▼) button for 3 seconds. The stopping value on the display will flash. Use the أعلى (▲) or لأسفل (▼) buttons to adjust to your desired stopping value. Press the تعيين زر للتأكيد والخروج.
3. إعادة التعيين إلى إعدادات المصنع: اضغط لفترة طويلة على رست button for 3 seconds until the display shows "888" or similar indication of reset.

The controller will automatically activate or deactivate the connected relays based on the set starting and stopping values to maintain the desired temperature or humidity range. For temperature control, if the starting temperature is lower than the stopping temperature, it operates in heating mode. If the starting temperature is higher than the stopping temperature, it operates in cooling mode. Similar logic applies to humidity control for humidification/dehumidification.

صيانة

Proper maintenance ensures the longevity and accuracy of your controller:

• حافظ على نظافة جهازك وخلوه من الغبار والأوساخ. استخدم قطعة قماش ناعمة وجافة للتنظيف.
• تأكد من وجود تهوية كافية حول الوحدة لمنع ارتفاع درجة الحرارة.
• قم بفحص جميع توصيلات الأسلاك بشكل دوري للتأكد من أنها تبقى آمنة وخالية من التآكل.
• Avoid exposing the unit or sensors to extreme temperatures, high humidity, or corrosive environments outside their specified operating ranges.
• Do not attempt to disassemble the unit beyond what is described in this manual.

استكشاف الأخطاء وإصلاحها

If you encounter issues with your controller, refer to the table below for common problems and solutions:

الضمان والدعم

For warranty information or technical support regarding your IXITAB STC-3008, STC-3018, or STC-3028 controller, please refer to the documentation provided with your product at the time of purchase or contact IXITAB customer service through the platform where you purchased the item.

When contacting support, please be prepared to provide your product model number (STC-3008, STC-3018, or STC-3028) and details of your purchase.