FINOSEN FI_0504_42

FINOSEN Concealed Sliding Barn Door Hardware Instruction Manual

Model: FI_0504_42

1. انتهى المنتجview

This FINOSEN concealed sliding barn door hardware system is designed for wall-mounted installations, providing a sleek and modern aesthetic. It features a soft close mechanism for quiet and smooth operation.

  • توافق الباب: Designed for door widths that are the opening size plus 8 inches for full opening, or opening size plus 4 inches for a minimum overlap of 4 inches.
  • سمك الباب: Suitable for door thicknesses ranging from 1-1/4 inches to 1-3/4 inches.
  • قدرة الوزن: Supports doors weighing up to 132 lbs.
  • مادة: Constructed from high-quality aluminum with premium nylon roller pulleys, coated with a silver surface for corrosion and rust resistance.
Diagram showing door width and opening size calculations for 42-inch track
Figure 1: Door and Opening Size Specifications. This diagram illustrates the relationship between door width, passage width (PW), and door width (DW) for both fully open and 4-inch overlap scenarios. It also details the roller location and required clearances.

2. محتويات العبوة

Verify that all components listed below are included in your package. Note: Door is not included.

  • 1 x 41-3/4 inch Top Track
  • 1 x Top Roller
  • 2 x Soft Close Mechanism
  • 2 x End Cap
  • 2 x Bottom Wheel
  • 1 x Bottom Track
  • 1 x Floor Guide
Image showing all components included in the FINOSEN concealed sliding barn door hardware kit
Figure 2: Kit Components. This image displays all the hardware pieces included in the package, such as the top track, top roller, soft close mechanisms, end caps, bottom wheels, bottom track, and floor guide.

3. المواصفات

ميزةمواصفة
ماركةFINOSEN
رقم الموديلFI_0504_42
لونفضي
مادةالألومنيوم
أسلوبحديث
مطلوب التجميعنعم
وزن العنصر5.29 رطل
أبعاد المنتج1.5 × 41.75 × 41.75 بوصة
مقاس42in track for 34inch opening (No door)
طريقة التثبيتمثبت على الحائط
كمية حزمة العنصر1
عدد القطع8
الحد الأقصى لوزن السعة132 رطل
المميزات الخاصةمقاوم للصدأ

4. شروط التثبيت

قبل البدء في عملية التثبيت، تأكد من استيفاء الشروط التالية:

  • The floor must be flat and level.
  • The door opening width should be between 34 inches and 38 inches.
  • The door panel thickness must be between 1-1/4 inches and 1-3/4 inches.
  • The door panel must have at least 19/32 inches of material to reserve for screws.
  • A groove needs to be cut into the top of the door for the hardware.
  • The width of the door should not be less than 28-17/32 inches.
Diagram illustrating door preparation requirements, including groove depth and door thickness
Figure 3: Door Preparation. This image details the necessary groove cut in the top of the door and the required door thickness for proper hardware fitment.

5. الإعداد والتثبيت

Follow these steps carefully for proper installation of your concealed sliding barn door hardware. Professional installation is recommended if you are not experienced with woodworking tools.

5.1 باب التحضير

  1. Measure and cut an L-shaped groove into the top edge of your door panel. Refer to Figure 3 for dimensions.
  2. Ensure the door thickness is within the specified range of 1-1/4" to 1-3/4".
  3. Confirm that the door panel has sufficient material (at least 19/32") for screw installation.

5.2 Bottom Track and Wheel Installation

  1. Measure the required length for the bottom track based on your door's dimensions.
  2. Cut the bottom track to the measured length using appropriate tools.
  3. Install the bottom wheels into the prepared groove at the bottom of the door. These wheels fix the sides of the bottom track and provide load-bearing support.
  4. Secure the bottom track to the floor according to the provided measurements, ensuring it aligns with the door's path.
عن قرب view of the bottom wheel installed in a door groove
Figure 4: Bottom Wheel Installation. This image shows how the bottom wheel is integrated into the door's lower edge, designed to engage with the floor track.

5.3 Top Roller and Soft Close Mechanism Installation

  1. Mark the positions for the top roller and soft close mechanisms on the top edge of the door, ensuring correct spacing and alignment.
  2. Drill pilot holes as indicated by the markings.
  3. Attach the top roller and soft close mechanisms securely to the door using the provided screws.
  4. Install the top track to the wall above the door opening, ensuring it is level and securely fastened.
  5. Carefully lift the door and engage the top rollers with the top track.
  6. Adjust the anti-jump devices to prevent the door from disengaging from the track.
مفصل view of the top roller, soft close mechanism, and anti-jump device
Figure 5: Top Mechanism Components. This image highlights the top roller, soft close mechanism, and anti-jump device, showing their relative positions within the track system.
View of the concealed sliding barn door hardware installed at the top of a door
Figure 6: Installed Concealed Mechanism. This image provides a perspective of the hardware system once installed, showing how it integrates discreetly with the door and wall.

5.4 دليل فيديو التثبيت

للحصول على دليل مرئي خطوة بخطوة، يرجى الرجوع إلى فيديو التثبيت الرسمي:

Video 1: Official Installation Guide for FINOSEN Concealed Sliding Door System. This video provides a detailed walkthrough of the installation process, from door preparation to final adjustments.

6. تعليمات التشغيل

The FINOSEN concealed sliding barn door hardware is designed for smooth and quiet operation.

  • To open or close the door, gently push or pull the door panel along the track.
  • The integrated soft close mechanism will engage automatically as the door approaches its fully open or fully closed position, slowing the door down for a silent and controlled stop.
  • Avoid forcing the door against the soft close mechanism. Allow it to engage naturally.
Diagram explaining the function of the soft close mechanism with bi-directional buffering
Figure 7: Soft Close Mechanism. This diagram illustrates the bi-directional buffering feature of the soft close mechanism, which provides a gentle stop when the door slides to the edge of the track.

7. الصيانة

Regular maintenance ensures the longevity and optimal performance of your sliding door hardware.

  • تنظيف: Wipe the tracks and rollers periodically with a soft, damp استخدم قطعة قماش لإزالة الغبار والحطام. تجنب المنظفات الكاشطة.
  • تشحيم: Apply a silicone-based lubricant to the rollers and inside the tracks once every 6-12 months to maintain smooth operation. Do not use oil-based lubricants as they can attract dirt.
  • تقتيش: Periodically check all screws and fasteners to ensure they are tight. Re-tighten if necessary. Inspect rollers and mechanisms for any signs of wear or damage.

8. استكشاف الأخطاء وإصلاحها

If you encounter issues with your sliding door hardware, refer to the following common problems and solutions:

مشكلةالسبب المحتملحل
Door is difficult to slideDirt or debris in tracks; lack of lubrication; misaligned track.Clean tracks thoroughly. Apply silicone lubricant to rollers and tracks. Check track alignment and adjust if needed.
Soft close mechanism not engagingMechanism improperly installed or adjusted; damaged mechanism.Verify mechanism installation and adjustment according to instructions. If damaged, contact support for replacement.
Door wobbles or feels looseLoose fasteners; improper installation of anti-jump devices.Check and tighten all mounting screws. Ensure anti-jump devices are correctly positioned and secured.

9. الضمان والدعم

This product is covered by a standard return policy, allowing returns within 30 days for refund or replacement.

For further assistance, including step-by-step installation guidance or professional support, please contact our service team. Support is available within 24 hours.

لمزيد من المعلومات، قم بزيارة FINOSEN Store on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.