1. المقدمة
Thank you for choosing the Voktta USB Tester. This device is a compact and versatile digital multimeter designed for real-time monitoring of voltage, current, and power in USB-connected devices. It features an IPS high-definition color LCD display for clear readings and supports various fast charging protocols. This manual will guide you through the setup, operation, and maintenance of your USB tester to ensure accurate and reliable performance.
2. انتهى المنتجview
2.1 الميزات الرئيسية
- Real-time Measurement: يعرض مستوى الصوت في نفس الوقتtagه ، التيار ، والقوة.
- شاشة عالية الوضوح: Features an IPS color LCD with high brightness for multi-directional viewعمل.
- التوافق الواسع: يكتشف المجلدtage and current for various power outputs and assesses the quality of USB data cables.
- Fast Charging Protocol Identification: Supports identification of QC2.0 and QC3.0.
- الهندسة الدقيقة: Utilizes a professional circuit scanning instrument combined with a unique precision algorithm for accurate and stable measurements.
- تطبيق واسع: Ideal for quality control of 3C digital and peripheral products with USB interfaces, connecting to laptops, mobile phones, and desktop computers.
2.2 محتويات العبوة
- 1 x Voktta USB Tester
Image 2.2.1: The Voktta USB Tester, illustrating its dual display for current and voltage, along with key features like its USB interface and precise measurement capabilities.
Image 2.2.2: The versatility of the USB tester, demonstrating its use with various devices such as chargers, power banks, mobile phones, and computers.
3. الإعداد
The Voktta USB Tester is designed for simple plug-and-play operation. No external power source or software installation is required.
3.1 توصيل جهاز الاختبار
- Locate the USB-A male connector on the Voktta USB Tester.
- Plug the USB-A male connector into the USB output port of your power source (e.g., wall charger, power bank, computer USB port).
- Connect your device (e.g., smartphone, tablet, USB fan) to the USB-A female output port(s) on the Voktta USB Tester using its charging cable.
- The display on the USB tester will illuminate, showing real-time measurements.
Image 3.1.1: Illustrates the connection of the USB tester between a power source and devices, showing simultaneous charging and measurement.
4. تعليمات التشغيل
Once connected, the Voktta USB Tester automatically begins monitoring and displaying the electrical parameters.
4.1 قراءة الشاشة
- The tester features a dual-color IPS display. Typically, one color (e.g., red) indicates current (Amperes, A) and the other (e.g., blue) indicates voltage (Volts, V).
- The display shows the instantaneous voltage and current being drawn by the connected device.
- The device also detects power (Watts, W), which is calculated from voltagهـ والحالية.
4.2 Understanding Measurements
- المجلدtagه (الخامس): Represents the electrical potential difference. A stable voltage reading indicates a healthy power supply.
- التيار (أ): Represents the flow of electrical charge. Higher current indicates faster charging (if supported by the device and charger).
- القدرة (واط): The rate at which electrical energy is transferred. Calculated as Voltage x Current.
- QC2.0/QC3.0 Identification: The tester can identify if the connected charger and device are utilizing Quick Charge protocols, which may result in higher voltage readings (e.g., 9V, 12V) during fast charging. Note that real-time data may vary slightly due to dynamic charging conditions.
5. الصيانة
To ensure the longevity and accuracy of your Voktta USB Tester, follow these simple maintenance guidelines:
- تنظيف: Wipe the device with a soft, dry cloth. Do not use liquid cleaners or solvents, as they may damage the display or internal components.
- تخزين: يُحفظ جهاز الاختبار في مكان بارد وجاف بعيداً عن أشعة الشمس المباشرة ودرجات الحرارة القصوى.
- التعامل: Avoid dropping the device or subjecting it to strong impacts, which could affect its precision.
- رُطُوبَة: احفظ الجهاز بعيدًا عن الماء والرطوبة العالية.
6. استكشاف الأخطاء وإصلاحها
If you encounter issues with your Voktta USB Tester, please refer to the following common problems and solutions:
- No Display/No Readings:
- Ensure the tester is firmly plugged into a working USB power source.
- Verify that the connected device is drawing power (e.g., charging).
- حاول استخدام منفذ USB أو مصدر طاقة مختلف.
- Ensure the cable connecting your device to the tester is functional.
- قراءات غير دقيقة:
- Ensure all connections are secure. Loose connections can lead to unstable readings.
- Test with a known good charger and cable to verify baseline accuracy.
- Note that some power sources or cables may have internal resistance affecting readings slightly.
- Device Not Charging Through Tester:
- Check if the device's charging cable is properly connected to the tester's output port.
- تأكد من أن مصدر الطاقة يوفر طاقة كافية.
- Try connecting the device directly to the power source to confirm the device and cable are working.
If the problem persists, please contact Voktta customer support for further assistance.
7. المواصفات
| المعلمة | قيمة |
|---|---|
| رقم الموديل | A38GXQC0070-004 |
| أبعاد | 60 × 28 × 15 ملم (2.36 × 1.10 × 0.59 بوصة) |
| وزن | 22 جرام |
| المجلدtagنطاق القياس | 4 - 30 فولت |
| المجلدtagهـ القرار | 0.01 فولت |
| نطاق القياس الحالي | 0 - 3 أمبير |
| القرار الحالي | 0.01 أ |
| دقة القياس | ±1% |
| فقدان الخط | Approximately 0.1 Ω |
| نوع العرض | IPS High-Definition Color LCD |
| مصدر الطاقة | USB powered (no internal batteries required) |
Image 7.1.1: Detailed product parameters table for the Voktta USB Tester.
Image 7.1.2: Physical dimensions of the Voktta USB Tester.
8. الضمان والدعم
Voktta is committed to providing high-quality products and customer satisfaction. For any questions, technical support, or warranty claims regarding your USB Tester, please contact our customer service team. Please refer to your purchase documentation for specific warranty terms and contact information.
We are dedicated to assisting you with any issues you may encounter and ensuring your experience with our product is positive.