EVTSCAN Projection Clock User Manual

1. معلومات هامة حول السلامة

Please read all instructions carefully before using the EVTSCAN Projection Clock. Keep this manual for future reference.

• لا تعرض الجهاز لدرجات حرارة عالية، أو أشعة الشمس المباشرة، أو الرطوبة العالية.
• تجنب إسقاط الساعة أو تعريضها لصدمات قوية.
• لا تحاول تفكيك الجهاز أو إصلاحه بنفسك. اتصل بفني صيانة مؤهل.
• Use only the specified power adapter (DC 5.0V, 1.2A) or appropriate batteries (2xAAA, not included).
• يحفظ بعيدًا عن متناول الأطفال.

2. انتهى المنتجview

The EVTSCAN Projection Clock is a versatile digital alarm clock featuring a 3-inch backlit LCD screen that displays time, date, day of the week, temperature, and humidity. It includes a projection function to display time and temperature on a wall or ceiling, dual alarms with snooze, and a USB port for charging mobile phones.

المميزات الرئيسية:

• 12/24-hour time format display.
• Date and day of the week display (7 languages for week).
• Temperature detection (-9℃ to +50℃) and humidity detection (20% to 95%).
• Projection function with 180-degree rotation for time and temperature.
• Dual alarm clocks with slowly increasinحجم بالجرام.
• 5-minute snooze function.
• منفذ شحن USB للأجهزة المحمولة.
• Adjustable backlight with 4 levels (high, medium, low, off).

الشكل 2.1: أمام view of the EVTSCAN Projection Clock, showing the LCD display and projection lens.

3. محتويات العبوة

عند تفريغ العبوة، يرجى التأكد من أن جميع العناصر المدرجة أدناه موجودة وفي حالة جيدة:

• 1 x EVTSCAN Projection Clock
• 1 × كابل يو اس بي
• 1 × دليل المستخدم باللغة الإنجليزية

Note: 2xAAA batteries are required for battery power and are not included in the package.

4. الإعداد

4.1 تشغيل الجهاز

The EVTSCAN Projection Clock can be powered by either AAA batteries or via the included USB cable.

4.1.1 تركيب البطارية

1. حدد مكان غطاء حجرة البطارية في الجزء الخلفي من الساعة.
2. Slide open the cover.
3. قم بإدخال بطاريتين (2) AAA، مع التأكد من القطبية الصحيحة (+/-).
4. أغلق غطاء حجرة البطارية جيدًا.

Note: When powered by batteries, the backlight will only light up for 8 seconds when activated to conserve power. The projection lamp will also light up for 8 seconds.

4.1.2 USB Power Connection

1. Connect the small end of the provided USB cable to the DC 5.0V 1.2A input port on the back of the clock.
2. Connect the larger end of the USB cable to a compatible USB power adapter (not included) or a powered USB port.

Note: When powered by USB, the backlight and projection lamp can remain continuously on, with adjustable brightness for the backlight.

الشكل 4.1: مؤخرة view of the clock, indicating the battery compartment and DC 5.0V 1.2A power input.

5. تعليمات التشغيل

5.1 وظائف الأزرار

Familiarize yourself with the control buttons located on the front and sides of the clock:

• وقت: يدخل إلى وضع ضبط الوقت.
• إنذار: يدخل وضع ضبط المنبه.
• +: Increases values, switches 12/24HR format, adjusts backlight.
• -: Decreases values, switches temperature units (℃/℉).
• Projection ON/OFF Switch: Activates or deactivates the projection. (Located on the back/side)
• Alarm 1 ON/OFF Switch: Activates or deactivates Alarm 1. (Located on the side)
• Alarm 2 ON/OFF Switch: Activates or deactivates Alarm 2. (Located on the side)

الشكل 5.1: جانب view showing Alarm 1 and Alarm 2 ON/OFF switches, and the USB charging port.

5.2 ضبط الوقت والتاريخ

1. اضغط مع الاستمرار على وقت button to enter time setting mode. The hour display will flash.
2. استخدم + or - أزرار لضبط الساعة.
3. يضعط وقت again to confirm the hour and move to minute setting. Adjust with + or -.
4. تواصل الضغط وقت to cycle through setting year, month, and day. Adjust each with + or -.
5. بعد ضبط اليوم، اضغط على وقت للمرة الأخيرة للخروج من وضع الإعدادات.
6. للتبديل بين تنسيق 12 ساعة وتنسيق 24 ساعة، اضغط على + button during normal time display.
7. To switch between Celsius (℃) and Fahrenheit (℉) for temperature, press the - button during normal time display.

5.3 ضبط المنبهات

تحتوي الساعة على منبهين مستقلين (المنبه 1 والمنبه 2).

1. اضغط مع الاستمرار على إنذار button to enter Alarm 1 setting mode. The Alarm 1 hour display will flash.
2. استخدم + or - أزرار لضبط ساعة التنبيه.
3. يضعط إنذار again to confirm the hour and move to Alarm 1 minute setting. Adjust with + or -.
4. يضعط إنذار again to move to Alarm 2 hour setting, and repeat the process for Alarm 2.
5. After setting Alarm 2 minutes, press إنذار للمرة الأخيرة للخروج من وضع الإعدادات.
6. To activate or deactivate an alarm, use the corresponding إنذار 1 تشغيل/إيقاف or إنذار 2 تشغيل/إيقاف switch on the side of the clock. An alarm icon will appear on the display when active.

5.3.1 وظيفة الغفوة

When an alarm sounds, press any button (except the alarm ON/OFF switch) to activate the 5-minute snooze function. The alarm will sound again after 5 minutes. To turn off the alarm completely, slide the corresponding alarm ON/OFF switch to OFF.

5.4 دالة الإسقاط

The clock can project the time and temperature onto a wall or ceiling.

1. حدد موقع تشغيل/إيقاف العرض switch on the back of the clock. Slide it to ON to activate the projection.
2. Adjust the angle of the projection arm (the part with the lens) to direct the projection as desired. The arm can rotate nearly 180 degrees.
3. The projection will display the current time and temperature in a soft red color.

الشكل 5.2: جانب view showing the projection arm extended and ready for use.

الشكل 5.3: The clock projecting time and temperature onto a wall in a bedroom setting.

5.5 تعديل الإضاءة الخلفية

When the clock is powered by USB, the backlight can be adjusted to four levels: high, medium, low, or off. Repeatedly press the + button during normal time display to cycle through the brightness levels.

When powered by batteries, the backlight will illuminate for 8 seconds when any button is pressed, then turn off to conserve power.

5.6 منفذ شحن USB

The clock features a USB charging port (5V=1A) on its side. You can use this port to charge your mobile phone or other small electronic devices while the clock is connected to USB power.

Note: The USB charging port only functions when the clock is powered via the USB cable. It does not work when the clock is running on battery power.

6. الصيانة

6.1 التنظيف

• امسح سطح الساعة بقطعة قماش ناعمة وجافة.
• Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the finish or electronic components.
• Keep the projection lens clean for clear projection. Use a soft, lint-free cloth.

6.2 استبدال البطارية

When the display becomes dim or the clock functions erratically while on battery power, it's time to replace the AAA batteries. Refer to Section 4.1.1 for battery installation instructions. Always replace both batteries at the same time with new ones.

7. استكشاف الأخطاء وإصلاحها

8. المواصفات

الشكل 8.1: Product dimensions: 5.3 inches wide by 3.1 inches high.

9. الضمان والدعم

EVTSCAN products are manufactured to high quality standards. For specific warranty information, please refer to the warranty card included with your purchase or contact your retailer.

If you encounter any issues or have questions regarding your EVTSCAN Projection Clock, please contact the seller or EVTSCAN customer support for assistance. Please have your model number (B0CLGDFCGX) ready when contacting support.

لمزيد من المساعدة، يمكنك زيارة EVTSCAN Store on Amazon.