YITAHOME MAYIHFFc0b

YITAHOME Outdoor Swivel Bar Stools Instruction Manual

Model: MAYIHFFc0b

مقدمة

Thank you for choosing the YITAHOME Outdoor Swivel Bar Stools. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new bar stools. Please read these instructions carefully before assembly and retain them for future reference.

Two YITAHOME Outdoor Swivel Bar Stools with red cushions on a patio.

Image: YITAHOME Outdoor Swivel Bar Stools, a set of two chairs with red cushions, designed for outdoor patio use.

معلومات السلامة

تحذير:

  • لا تتجاوز الحد الأقصى للوزن المسموح به 352 رطل (160 كجم) per chair. Exceeding this limit may result in injury or product damage.
  • تأكد من إحكام ربط جميع البراغي والصواميل قبل الاستخدام. افحصها دوريًا وأعد ربطها حسب الحاجة.
  • Avoid improper use of the swivel mechanism, such as excessive force or standing on the chair, which may lead to instability or damage.
  • احتفظ بالأجزاء الصغيرة ومواد التغليف بعيدًا عن متناول الأطفال لتجنب مخاطر الاختناق.
  • قم بتجميع المنتج على سطح ناعم ونظيف لمنع خدشه.

محتويات الحزمة

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact YITAHOME customer support.

  • Swivel Bar Stool Frames (2 sets)
  • وسائد المقاعد (2)
  • Back Pillows (2)
  • Assembly Hardware (bolts, washers, nuts, wrench)
  • دليل التعليمات

تعليمات الإعداد والتجميع

Assembly is recommended with two people for ease and safety. Lay out all components on a soft, flat surface to prevent scratches.

  1. فك مكونات الحزمة: Carefully remove all parts from the packaging. Identify and separate all hardware.
  2. تجميع القاعدة: Attach the leg sections to the central swivel mechanism. Ensure the footrest ring is correctly oriented. Do not fully tighten bolts at this stage.
  3. Attach the Seat Frame: Secure the seat frame to the assembled base. Align the screw holes carefully. It may require maneuvering the pieces to align and thread correctly.
  4. Install Backrest and Armrests: Attach the backrest and armrests to the seat frame. Ensure the modern back design is facing the correct direction.
  5. أحكم ربط جميع الأجزاء المعدنية: Once all parts are loosely assembled, gradually tighten all bolts using the provided wrench. Ensure the bolt goes through the hole, followed by a flat washer, then a lock washer, and finally the nut. Do not overtighten.
  6. وضع الوسائد: Position the seat cushion and back pillow onto the assembled chair.
Diagram showing the assembly of a YITAHOME swivel bar stool, highlighting the connection points.

Image: An illustrative diagram demonstrating the assembly process for the swivel bar stools.

تعليمات التشغيل

Your YITAHOME Outdoor Swivel Bar Stools are designed for comfortable outdoor seating with a smooth swivel function.

  • وظيفة الدوران: The chairs feature a 360-degree smooth swivel mechanism. To rotate, simply apply gentle pressure with your body in the desired direction. Avoid sudden, forceful movements.
  • استخدام الوسادة: The included springy sponge cushions and pillows provide optimal comfort. They are made with waterproof fabric, suitable for outdoor use. For prolonged life, store cushions indoors during heavy rain or off-season.
  • تصلح: The curve-fit armrests are ergonomically designed for comfortable support during extended periods of sitting.
Close-up of the swivel mechanism on the YITAHOME bar stool, showing a circular motion.

Image: The 360-degree free swivel feature of the bar stool, illustrating its rotational capability.

Close-up of the modern back design of the YITAHOME bar stool.

Image: Detail of the modern back design, highlighting its sturdy, anti-rust, and weather-resistant properties.

Close-up of the curve-fit armrests on the YITAHOME bar stool.

Image: The ergonomically designed curve-fit armrests for enhanced comfort.

الصيانة والعناية

Proper care will extend the life and appearance of your outdoor swivel bar stools.

  • تنظيف: امسح بالإعلانamp قطعة قماش. لإزالة الأوساخ العنيدة، استخدم محلول صابون لطيف واشطف جيدًا. تجنب المواد الكيميائية القاسية أو المنظفات الكاشطة.
  • العناية بالإطار: The heavy-duty steel frame is covered with a high-performance powder coating for rust and weather resistance. Inspect the frame periodically for any signs of wear or rust, and touch up with appropriate outdoor paint if necessary.
  • العناية بالوسادة: While the fabric is waterproof, it is recommended to store cushions indoors during inclement weather or when not in use for extended periods to prevent fading and prolong their lifespan. Clean cushions with mild soap and water, then air dry completely.
  • الأجهزة: Periodically check all bolts and nuts to ensure they remain tight. Re-tighten as needed to maintain stability.
  • التخزين الشتوي: During winter months or prolonged periods of non-use, it is advisable to store the chairs in a dry, protected area to prevent damage from extreme weather conditions.

استكشاف الأخطاء وإصلاحها

مشكلةالسبب المحتملحل
صعوبة في محاذاة فتحات البراغي أثناء التجميعParts not perfectly aligned; screws may be slightly short.Have a second person assist in holding and maneuvering parts. Apply gentle pressure to align holes. Do not fully tighten any bolts until all are in place.
Screws stripping during tighteningOvertightening; using incorrect tool.Use the provided wrench and tighten only until snug. Avoid excessive force. If a screw head strips, contact customer support for replacement hardware.
Chair feels wobbly after assemblyBolts not fully tightened; uneven assembly.Ensure all bolts are securely tightened. Place the chair on a flat surface and gently rock it to settle the frame, then re-tighten any loose bolts.
Swivel mechanism is stiff or noisyLack of lubrication; debris in mechanism; damaged bearings.Apply a silicone-based lubricant to the swivel mechanism. Clean any visible debris. If bearings have fallen out or are damaged, contact customer support.
Cushions appear faded or wornالتعرض المطول للشمس والعوامل الجوية.Store cushions indoors when not in use or during harsh weather. Consider using outdoor furniture covers for the chairs.

تحديد

  • ماركة: يتاهوم
  • رقم الموديل: MAYIHFFc0b
  • لون: Red (as per current variant)
  • مادة: معدن (إطار)
  • أبعاد العنصر (الطول × العرض × الارتفاع): 29.13 × 25.59 × 45.28 بوصة (74 × 65 × 115 سم)
  • وزن السلعة: 50.7 رطل (23 كجم) لكل كرسي
  • قدرة الوزن: 352 رطل (160 كجم) لكل كرسي
  • المكونات المتضمنة: Cushion, Pillow
  • أسلوب: Candy Back
  • تعليمات العناية: امسح نظيفة

الضمان والدعم

صُممت منتجات YITAHOME لتوفير الجودة والمتانة. للاطلاع على معلومات الضمان بالتفصيل، يُرجى الرجوع إلى الوثائق المرفقة مع المنتج أو زيارة الموقع الرسمي لشركة YITAHOME. website. If you encounter any issues or require assistance with your product, please contact YITAHOME customer support:

  • Webموقع: www.yitahome.com (ملاحظة: هذا عنصر نائب URL, please refer to your product's specific support contact information.)
  • بريد إلكتروني: Refer to your purchase documentation.
  • هاتف: Refer to your purchase documentation.

Please have your model number (MAYIHFFc0b) and proof of purchase ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.