BST BSSP Universal 32-inch GM Steering Column Tilt Automatic Installation and Operation Manual

مقدمة

This manual provides detailed instructions for the installation, operation, and maintenance of your BST BSSP Universal 32-inch GM Steering Column. This column is designed for automatic transmissions and features a tilt function, a 9-hole steering wheel adapter, and a gear shift indicator. It is intended for custom applications and hot rods, and does not include an ignition key cylinder.

Please read this manual thoroughly before beginning installation or operation to ensure proper function and safety.

معلومات السلامة

• يوصى بالتركيب الاحترافي: Due to the complexity of automotive steering systems and potential safety implications, professional installation by a qualified mechanic is highly recommended.
• افصل البطارية: Always disconnect the vehicle's battery before performing any electrical work to prevent short circuits and electrical hazards.
• تأمين المركبة: تأكد من تثبيت السيارة بإحكام على حوامل الرفع أو رافعة قبل العمل أسفلها. لا تعتمد أبدًا على الرافعة فقط.
• ارتداء معدات السلامة: ارتدِ دائمًا معدات الحماية الشخصية المناسبة، بما في ذلك نظارات الأمان والقفازات.
• التحقق من المثبتات: After installation, double-check all fasteners for proper torque and security.
• وظيفة الاختبار: Thoroughly test all steering column functions (steering, turn signals, hazards, gear shift) in a safe, controlled environment before driving the vehicle.

محتويات الحزمة

تأكد من وجود جميع المكونات المدرجة أدناه وأنها غير تالفة قبل المتابعة في عملية التثبيت.

Main assembly of the 32-inch GM steering column, showing the column itself, the 9-hole adapter, and various levers and indicators.

كامله view of all included parts: the steering column, turn signal switch, tilt lever, hazard switch, gear indicator, shift indicator, and the 9-hole steering wheel adapter.

• 32-inch Automatic GM Steering Column (Black Coating Stainless Steel)
• 9-Hole Steering Wheel Adapter
• بدوره إشارة التبديل
• ذراع الإمالة
• مفتاح الخطر
• Gear Indicator Lens (3-speed and 4-speed)
• Shift Indicator
• Mounting Hardware (screws, pins, etc.)

Note: This product does not include an ignition key cylinder.

تحديد

The 32-inch column length measurement, from the top of the bell to the end of the output shaft. The 9-hole adapter adds 2.25 inches to the overall length when installed.

الإعداد والتثبيت

This universal steering column is designed for custom applications. It is not a direct OEM replacement and may require additional components and fabrication for proper installation in your specific vehicle. Examples of potentially required additional components include dash mounts, steering linkage, floor mounts, and transmission linkage.

1. فحوصات ما قبل التثبيت

• Review Vehicle Requirements: Before starting, understand the specific mounting and linkage requirements of your vehicle.
• جمع الأدوات: Ensure you have all necessary tools, including wrenches, sockets, wire strippers, crimpers, and a multimeter.
• فحص المكونات: Carefully inspect the steering column and all included parts for any shipping damage.

2. Mounting the Steering Column

• Remove Old Column: Disconnect the battery, remove the steering wheel, and carefully detach the existing steering column from the dash and steering linkage.
• Position New Column: Temporarily position the new BST BSSP steering column in the desired location. This column is 32 inches long (excluding the 9-hole adapter).
• Fabricate Mounts (if necessary): If your vehicle requires custom dash or floor mounts, fabricate and install them to securely hold the column. Ensure the column is properly aligned with the steering shaft and driver's position.
• Secure Column: Fasten the steering column securely using appropriate hardware.

Detail of the 1-inch DD (Double D) lower output shaft, which connects to the steering linkage.

3. Steering Linkage Connection

• Connect Output Shaft: Connect the 1-inch DD lower output shaft of the steering column to your vehicle's steering linkage. This may require a universal joint or custom shaft.
• تأكد من التخليص: Verify that there is adequate clearance for the steering linkage throughout its full range of motion.

4. الأسلاك

The steering column includes wiring for turn signals, hazard lights, and horn. A neutral safety switch is not included. Refer to your vehicle's specific wiring diagram for proper connections. Below is a general guide for common wire functions:

The multi-wire harness for electrical connections, including turn signals and hazard lights.

مهم: Always verify wire functions with a multimeter before making final connections, as color codes can vary. Ensure all connections are secure and properly insulated.

5. Installing Steering Wheel and Adapter

• Install 9-Hole Adapter: Slide the included 9-hole steering wheel adapter onto the top shaft of the column. This adapter adds 2.25 inches to the column height.
• Mount Steering Wheel: Attach your 9-hole steering wheel to the adapter using appropriate hardware. Ensure it is centered and securely tightened.

The 9-hole steering wheel adapter, designed for compatibility with various aftermarket steering wheels.

6. Installing Levers and Indicators

• Turn Signal Lever: Insert the turn signal lever into its designated slot on the column head.
• Tilt Lever: Thread the tilt lever into its receptacle. Ensure it engages properly.
• Hazard Switch: Install the hazard switch button.
• Shift Indicator: Install the gear indicator housing and select the appropriate 3-speed or 4-speed lens for your transmission.

The various levers and gear indicator components that attach to the steering column.

A view of the column head where the turn signal and tilt levers are installed, along with the horn contact.

تعليمات التشغيل

وظيفة الإمالة

To adjust the steering column angle, pull the tilt lever towards you. While holding the lever, move the steering wheel up or down to your desired position. Release the lever to lock the column in place.

إشارات الانعطاف

Push the turn signal lever up for a right turn and down for a left turn. The lever should automatically return to the neutral position after completing the turn. If it does not, manually return it.

أضواء الخطر

Press the hazard switch button to activate the hazard warning lights. Press it again to turn them off.

مؤشر تبديل التروس

The gear indicator displays the current transmission gear (e.g., P, R, N, D, 2, 1). Ensure the indicator aligns correctly with the transmission's actual gear selection. Adjust the linkage if necessary to ensure accurate indication.

The shift indicator mechanism, which connects to the transmission linkage to display the selected gear.

صيانة

• التفتيش الدوري: Periodically inspect the steering column for any signs of wear, looseness, or damage. Check all mounting points and connections.
• تشحيم: Moving parts within the column, such as the tilt mechanism, may benefit from occasional lubrication with a suitable automotive grease or spray lubricant.
• التوصيلات الكهربائية: تأكد من أن جميع التوصيلات الكهربائية تظل نظيفة ومحكمة وخالية من التآكل.
• تنظيف: Clean the exterior of the column with a soft cloth and mild automotive cleaner. Avoid harsh chemicals that could damage the finish.

استكشاف الأخطاء وإصلاحها

معلومات الضمان

Specific warranty details for the BST BSSP Universal 32-inch GM Steering Column are not provided in this manual. For information regarding product warranty, including coverage, duration, and claims process, please contact BST BSSP directly or refer to the original purchase documentation.

الدعم والاتصال

If you encounter any issues during installation or operation, or require technical assistance, please contact BST BSSP customer support. You can typically find contact information on the manufacturer's webالموقع أو من خلال نقطة الشراء الأصلية الخاصة بك.

للحصول على موارد إضافية ومعلومات عن المنتج، قم بزيارة BST BSSP Store on Amazon.