AZZA Cube 360 360mm All-in-One CPU Liquid Cooler User Manual

مقدمة

This manual provides detailed instructions for the installation, operation, and maintenance of your AZZA Cube 360 360mm All-in-One (AIO) CPU Liquid Cooler. Please read this manual thoroughly before installation to ensure proper setup and optimal performance of your cooling system.

احتياطات السلامة

Observe the following safety guidelines to prevent damage to the product or injury to yourself:

• تأكد من إيقاف تشغيل نظام الكمبيوتر لديك وفصله عن مأخذ الحائط قبل التثبيت أو الصيانة.
• Handle components with care to avoid electrostatic discharge. Consider using an anti-static wrist strap.
• Do not open the liquid cooler's sealed components. Tampering with the unit may void the warranty and cause leaks.
• احفظ المنتج بعيدًا عن السوائل ودرجات الحرارة العالية.
• If any part is damaged, do not attempt to install or operate the cooler. Contact customer support.

محتويات الحزمة

تأكد من وجود جميع المكونات في الحزمة الخاصة بك:

• AZZA Cube 360 AIO Liquid Cooler (Radiator, Pump, Tubing, and Fans pre-attached)
• Intel Mounting Bracket Kit (LGA 115X / 1366 / 1200 / 1700 / 1851)
• AMD Mounting Bracket Kit (AM5 / AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2+ / FM2 / FM1)
• لوحة خلفية لمقابس إنتل
• براغي التثبيت والفواصل
• معجون حراري (مطبق مسبقًا أو في أنبوب)
• دليل المستخدم (هذا المستند)

المواصفات الفنية

دليل التثبيت

قبل أن تبدأ

• Gather necessary tools: Phillips head screwdriver, thermal paste cleaner (if reapplying).
• Ensure your PC case has adequate space for a 360mm radiator.
• Identify your CPU socket type (Intel or AMD) to select the correct mounting hardware.

مكون أكثرview

The AZZA Cube 360 AIO Liquid Cooler consists of a radiator with three fans, a pump integrated into the waterblock, and connecting tubes. The waterblock features an 85mm tall design for efficient heat transfer.

الصورة: أكثر منview of the AZZA Cube 360 AIO Liquid Cooler, showing the 360mm radiator with three RGB fans and the distinct cube-shaped waterblock.

التثبيت خطوة بخطوة

1. تحضير اللوحة الأم:
   • For Intel sockets, install the appropriate backplate behind the motherboard.
   • Install the correct standoffs onto the motherboard for your CPU socket type.
   • If thermal paste is pre-applied to the cold plate, ensure it is clean and intact. If not, apply a small amount of high-quality thermal paste to the center of your CPU's integrated heat spreader (IHS).
2. تركيب المبرد والمراوح:

   The radiator comes with three 120mm fans pre-installed. These fans feature a vortex design for efficient airflow and quiet operation, with speeds up to 2000 RPM and noise levels of 34 dB (A).

   

   الصورة: لقطة مقربة view of one of the cooler's fans, highlighting its vortex design and ARGB lighting. The image also indicates an airflow range of 16.4 - 65.2 CFM.

   • Mount the 360mm radiator to an available fan mounting location in your PC case (typically top or front). Use the provided long screws to secure the radiator and fans to the case.
   • Ensure the tubing has enough slack to reach the CPU socket without excessive tension or sharp bends.
3. Mount Waterblock/Pump:

   The waterblock features a patented design with the pump embedded in an aluminum alloy base, minimizing vibration and enhancing safety. It also incorporates patented rectangular radiator fins and flat water channels for improved heat dissipation.

   

   Image: An exploded diagram illustrating the internal components of the patented water pump, including the single-piece impeller and aluminum alloy pump base.

   

   Image: The AZZA Cube 360 AIO Liquid Cooler mounted on a motherboard, showcasing its compact waterblock and RGB lighting in an operational setup.

   • Attach the correct mounting brackets for your CPU socket to the waterblock.
   • Carefully align the waterblock over the CPU, ensuring the thermal paste makes even contact.
   • Secure the waterblock to the motherboard using the provided thumb screws or nuts, tightening them in a diagonal pattern until snug. Do not overtighten.
4. توصيل الكابلات:
   • Connect the pump's 3-pin power cable to a CPU_FAN or AIO_PUMP header on your motherboard. Consult your motherboard manual for the correct header.
   • Connect the fan power cables (typically 4-pin PWM) to available fan headers on your motherboard or a fan controller.
   • Connect the ARGB (Addressable RGB) cables from the fans and pump to a compatible 5V ARGB header on your motherboard or an ARGB controller. Ensure the voltage is correct (5V, not 12V) to prevent damage.

عملية

التشغيل الأولي

After completing the installation, double-check all connections. Power on your system. The fans and pump should start operating, and the ARGB lighting should illuminate. Monitor your CPU temperatures using system monitoring software to ensure proper cooling.

التحكم في إضاءة ARGB

The AZZA Cube 360 supports ARGB lighting. If connected to a compatible motherboard header, you can control the lighting effects using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync). If using a dedicated ARGB controller, refer to its manual for lighting adjustments.

Fan and Pump Speed

The fan and pump speeds are typically controlled via the motherboard's BIOS/UEFI settings or through motherboard-specific software. You can adjust fan curves to balance cooling performance and noise levels. The pump is designed to run at a consistent speed for optimal liquid circulation.

صيانة

Regular maintenance helps ensure the longevity and performance of your AIO cooler:

• تنظيف الغبار: نظّف الغبار المتراكم على زعانف المبرد وشفرات المروحة بشكل دوري باستخدام الهواء المضغوط. تأكد من توقف المراوح عن الدوران أثناء التنظيف لتجنب تلفها.
• التفتيش البصري: Regularly inspect the tubing and connections for any signs of leaks or damage. Check the fan cables and ARGB connections for secure fitment.
• المعجون الحراري: While not frequently required, if you remove the waterblock from the CPU, you must clean off the old thermal paste and apply new thermal paste before reinstallation.

استكشاف الأخطاء وإصلاحها

If you encounter issues with your AZZA Cube 360 AIO cooler, refer to the following table for common problems and solutions:

الضمان والدعم

AZZA products are manufactured to high standards and undergo rigorous quality control. This product is covered by a limited warranty against defects in materials and workmanship. The specific warranty period and terms may vary by region and retailer. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please visit the official AZZA website or contact your retailer. You may find additional resources, FAQs, and contact information on the AZZA support page: www.azza.com