BAIZIFU 36V/48V Brushless Motor Controller Instruction Manual

1. المقدمة

This manual provides detailed instructions for the installation, operation, and maintenance of your BAIZIFU 36V/48V Waterproof Brushless Motor Speed Controller. This controller is designed for electric bicycles and scooters, supporting motors with power ratings from 150W to 300W. Please read this manual thoroughly before use to ensure proper function and safety.

2. احتياطات السلامة

افصل الطاقة دائمًا قبل إجراء أي عملية تركيب أو صيانة أو استكشاف أعطال.
Ensure all connections are secure and correctly wired to prevent short circuits or damage.
تأكد من أن مستوى الصوت المدخلtage (36V/48V) matches your battery system.
Avoid exposing the controller to extreme temperatures or direct impact.
Although waterproof, avoid submerging the controller in water for extended periods.
إذا لم تكن متأكدًا من أي خطوة، فاستشر فنيًا مؤهلًا.

3. انتهى المنتجview

3.1 المميزات

36V/48V Rated Voltage
150-300 Watts Rated Power
Designed for electric bicycles and scooters, including mechanical or electric forklifts.
Brushless Controller technology for efficient operation.
تصميم مقاوم للماء لمتانة معززة.

3.2 المواصفات

يصف	قيمة
ماركة	BAIZIFU
المجلدtage	36 فولت / 48 فولت
القدرة المقدرة	150 واط - 300 واط
مادة	الألومنيوم
وزن العنصر	8 أونصة (0.5 رطل)
أبعاد الحزمة	3 × 3 × 2.1 بوصة
ضمان	1 سنة

3.3 مكونات المنتج

BAIZIFU 36V/48V Brushless Motor Controller with various colored wires — Image 1: The BAIZIFU 36V/48V Brushless Motor Controller, showing its compact aluminum casing and multiple colored wiring harnesses for connection to various components.

BAIZIFU 36V/48V Brushless Motor Controller with dimensions and specifications — الصورة 2: تفصيلية view of the motor controller, highlighting its dimensions (9cm/3.54inch length, 5cm/1.96inch width, 3cm/1.18inch height) and key features such as 36V/48V voltage support, 150-300W power support, waterproofing, and overheating protection. Note the high-temperature fireproof wire for safety and durability.

4. دليل التثبيت

Follow these steps to correctly install your brushless motor controller. Refer to the wiring diagram for visual guidance.

Wiring diagram for BAIZIFU 36V/48V Brushless Motor Controller — Image 3: Comprehensive wiring diagram illustrating connections for the motor wire, switch wire (on-off switch), speed control line (throttle switch/handle), and power cable (battery). This diagram helps ensure correct and secure connections for optimal performance.

Connect Motor Wire: Connect the motor wire from the controller to your motor. Ensure the connectors are firmly seated.
توصيل كابل الطاقة: Connect the power cable from the controller to your battery. Observe correct polarity (red to positive, black to negative).
Connect Speed Control Line: Attach the speed control line to your throttle switch or handle.
Connect Switch Wire: Connect the switch wire to your on-off switch.
اتصالات آمنة: Double-check all connections for tightness and correct placement.
وحدة التحكم في التركيب: Securely mount the controller in a suitable location on your electric bicycle or scooter, ensuring it is protected from physical damage and excessive heat.

4.1 فيديو التثبيت

Video: This video demonstrates the process of connecting the brushless motor and controller to a power source, illustrating the wiring steps for a functional setup.

5. تعليمات التشغيل

Once the controller is correctly installed, follow these steps to operate your electric vehicle:

تشغيل الطاقة: Turn on the main power switch connected to the controller.
التحكم في الخانق: Use the throttle handle or switch to control the motor speed. Gradually increase the throttle for smooth acceleration.
مراقبة الأداء: Pay attention to the motor's response and any unusual sounds during operation.
إيقاف التشغيل: When finished, turn off the main power switch to disconnect power to the controller and motor.

6. الصيانة والعناية

التفتيش الدوري: قم بإجراء فحص دوري لجميع توصيلات الأسلاك بحثًا عن أي علامات تآكل أو تآكل أو ارتخاء.
تنظيف: Keep the controller clean and free from dust and debris. Use a dry cloth for cleaning. Avoid using harsh chemicals.
حماية البيئة: While waterproof, protect the controller from prolonged exposure to heavy rain or direct water jets.
تخزين: If storing the vehicle for an extended period, ensure the controller is disconnected from the battery.

7. دليل استكشاف الأخطاء وإصلاحها

If you encounter issues with your motor controller, refer to the table below for common problems and solutions.

مشكلة	السبب المحتمل	حل
المحرك لا يبدأ	No power, loose connections, faulty switch.	Check battery charge, verify all wiring connections, test the on-off switch.
يعمل المحرك بشكل متقطع	Loose wiring, intermittent power supply, throttle issue.	Inspect all connections, check battery output, test throttle functionality.
Motor runs but no speed control	Faulty throttle, speed control line disconnected.	Check speed control line connection, test or replace throttle.
Controller gets excessively hot	Overload, poor ventilation, short circuit.	Reduce load, ensure proper airflow around controller, check for short circuits in wiring.

إذا استمرت المشكلة بعد محاولة هذه الحلول، فيرجى الاتصال بدعم العملاء.

8. الضمان والدعم

8.1 معلومات الضمان

This BAIZIFU Brushless Motor Controller comes with a ضمان لمدة 1 سنوات from the date of purchase. The warranty covers manufacturing defects and material faults under normal use. It does not cover damage caused by improper installation, misuse, accidents, unauthorized modifications, or normal wear and tear.

To claim warranty service, please retain your proof of purchase and contact our customer support team.

8.2 دعم العملاء

For technical assistance, troubleshooting, or warranty inquiries, please contact BAIZIFU customer support through the retailer's platform or the official brand website. Please have your product model number (B0CJ3DPVC6) and purchase details ready when contacting support.

BAIZIFU B0CJ3DPVC6