Imaginnationworld Exceed Induction Flying Helicopter LH-1802R User Manual

1. المقدمة

شكرا لك على الشراءasing the Imaginnationworld Exceed Induction Flying Helicopter LH-1802R. This manual provides essential information for the safe operation, setup, and maintenance of your new remote-controlled helicopter. Please read this manual thoroughly before use to ensure proper function and to prevent damage.

Image 1.1: The product packaging for the Imaginnationworld Exceed Induction Flying Helicopter LH-1802R.

2. معلومات السلامة

احرص دائمًا على مراعاة احتياطات السلامة التالية لمنع الإصابة أو إتلاف المنتج:

• توصية العمر: This product is recommended for ages 4 years and up. Adult supervision is advised for younger users.
• بيئة التشغيل: Operate the helicopter in open spaces, away from people, pets, and obstacles. Avoid flying near water, heat sources, or electrical wires.
• سلامة الشفرة: Keep fingers, hair, and loose clothing away from the rotating blades. Do not touch the helicopter while the blades are spinning.
• سلامة البطارية: Use only the provided charging cable. Do not overcharge the battery. Do not expose the battery to extreme temperatures or puncture it.
• التأثيرات: Avoid crashes. If a crash occurs, inspect the helicopter for damage before further use.
• التعرض للماء: This product is not waterproof. Avoid contact with water or moisture.

3. محتويات العبوة

Before starting, please verify that all components are present in the package:

• 1 x Exceed Induction Flying Helicopter LH-1802R
• 1 × جهاز التحكم عن بعد
• 1 × كابل شحن USB

Image 3.1: All included components: the helicopter, its remote control, and the USB charging cable.

4. انتهى المنتجview

Familiarize yourself with the main parts of your helicopter:

Image 4.1: Key features of the helicopter including the LED light, USB charging port, On/Off button, and infrared sensor.

• شفرات الدوار الرئيسية: Provide lift for flight. These are foldable for storage.
• Tail Rotor: يوفر الاستقرار والتحكم.
• ضوء LED: Located on the bottom, provides visual appeal during flight.
• منفذ شحن USB: For recharging the helicopter's internal battery.
• زر التشغيل/الإيقاف: Powers the helicopter on or off.
• حساس الأشعة تحت الحمراء: Detects objects below the helicopter for induction flight.

الصورة 4.2: تفصيلية view of the helicopter's body, showing its yellow and red design and landing gear.

5. الإعداد

5.1 Charging the Helicopter

1. Ensure the helicopter's power switch is in the عن موضع.
2. Connect the small end of the USB charging cable to the helicopter's charging port (refer to Image 4.1).
3. Connect the larger end of the USB charging cable to a standard USB power adapter (not included) or a computer's USB port.
4. The charging indicator (if present) will illuminate during charging and turn off or change color when fully charged.
5. تستغرق عملية الشحن عادةً ما بين 30 و45 دقيقة. تجنب الشحن الزائد.

5.2 تركيب بطارية جهاز التحكم عن بعد

The remote control requires 2x AAA batteries (not included).

1. حدد موقع حجرة البطارية في الجزء الخلفي من جهاز التحكم عن بعد.
2. افتح غطاء حجرة البطارية.
3. قم بإدخال بطاريتين AAA، مع التأكد من القطبية الصحيحة (+/-).
4. أغلق غطاء حجرة البطارية جيدًا.

Image 5.1: The helicopter alongside its remote control, ready for use.

6. تعليمات التشغيل

6.1 First Flight Preparation

1. تأكد من شحن الطائرة المروحية بالكامل وأن جهاز التحكم عن بعد مزود ببطاريات جديدة.
2. Find a suitable indoor or outdoor flying area, free from obstacles, people, and pets.
3. Unfold the helicopter blades carefully if they are folded.

6.2 التشغيل والإقران

1. Turn on the helicopter using the On/Off button (refer to Image 4.1). The LED light will flash.
2. قم بتشغيل جهاز التحكم عن بعد. سيومض ضوء المؤشر الموجود على جهاز التحكم عن بعد.
3. Move the left joystick (throttle) on the remote control fully up, then fully down. This will pair the remote with the helicopter. The lights on both the helicopter and remote will become solid once paired.

6.3 Flying the Helicopter (Induction Mode)

The LH-1802R features an induction flight mode, allowing it to hover automatically by detecting objects below it.

1. After pairing, gently push the left joystick (throttle) up to make the helicopter ascend.
2. Once airborne, the helicopter will attempt to maintain its altitude using its infrared sensor.
3. To control altitude manually, use the left joystick. Push up to ascend, pull down to descend.
4. To move the helicopter forward/backward or left/right, use the right joystick.
5. For induction flight, place your hand or another flat object below the helicopter. The sensor will detect it and cause the helicopter to rise, creating an interactive flying experience.

Image 6.1: The helicopter demonstrating its induction flight capability, hovering above a hand.

6.4 الهبوط

To land the helicopter, gently pull the left joystick (throttle) down until it slowly descends to the ground. Once landed, turn off the helicopter and then the remote control.

Image 6.2: Visual representation of key features including indoor/outdoor flight, cool LED light, 3D flight, and voltagالحماية الإلكترونية.

7. الصيانة

• تنظيف: Use a soft, dry cloth to clean the helicopter. Do not use water or chemical cleaners.
• فحص الشفرة: Regularly check the rotor blades for any damage or cracks. Replace damaged blades immediately to ensure safe flight.
• تخزين: When not in use, store the helicopter and remote control in a cool, dry place, away from direct sunlight. Ensure the helicopter is turned off.
• العناية بالبطارية: For long-term storage, it is recommended to partially charge the helicopter's battery (around 50%) and remove batteries from the remote control.

8. استكشاف الأخطاء وإصلاحها

9. المواصفات

Image 9.1: Visual representation of the helicopter's dimensions.

10. الضمان والدعم

For warranty information or technical support, please contact the seller or manufacturer directly through your purchase platform. Keep your purchase receipt as proof of purchase.