دليل التعليمات لماكينة الحلاقة والتشذيب الهجينة Philips OneBlade Face

مقدمة

The Philips OneBlade Face Hybrid Trimmer & Shaver is a versatile grooming tool designed for shaving, trimming, and edging any length of facial hair. Its unique technology is engineered to cut hair, not skin, providing a comfortable experience. This manual provides essential information on how to set up, operate, and maintain your OneBlade device for optimal performance and longevity.

معلومات هامة حول السلامة

يرجى قراءة جميع تعليمات السلامة قبل استخدام الجهاز. قد يؤدي عدم اتباع هذه التعليمات إلى حدوث صدمة كهربائية أو حريق أو إصابة خطيرة.

• Always keep the blade away from your eyes.
• Avoid using the device near water sources when charging.
• Charge the device on a dry surface.
• Unplug the device after it is fully charged to prevent overcharging.
• Replace the blade when the replacement indicator (eject icon) appears to maintain optimal performance and hygiene.
• لا يُقصد استخدام هذا الجهاز من قبل الأشخاص (بما في ذلك الأطفال) ذوي القدرات البدنية أو الحسية أو العقلية المحدودة، أو الذين يفتقرون إلى الخبرة والمعرفة، ما لم يتم الإشراف عليهم أو إعطائهم تعليمات فيما يتعلق باستخدام الجهاز من قبل شخص مسؤول عن سلامتهم.

محتويات الحزمة

تأكد من وجود جميع العناصر في الحزمة الخاصة بك:

• 1 Philips OneBlade Handle
• 1 Original OneBlade Blade
• 3 Stubble Combs (1mm, 3mm, 5mm)
• 1 USB-A Charging Cord (power adapter not included)
• 1 غطاء الحماية

Image: The Philips OneBlade device, along with its original blade, three stubble combs (1mm, 3mm, 5mm), a USB-A charging cable, and a protective cap, are shown. The product packaging is also visible, highlighting the "Original blade" and "Designed to cut hair not skin" features.

يثبت

شحن الجهاز

1. Connect the USB-A charging cord to the charging port on the bottom of the OneBlade handle.
2. Plug the USB-A end of the cord into a compatible USB power adapter (not included) or a USB port on a computer.
3. Allow the device to charge for approximately 8 hours for a full charge. A full charge provides up to 30 minutes of constant shaving power.
4. Ensure the device is completely dry before charging.

Attaching and Detaching the Blade and Combs

• Attaching the Blade: Align the blade with the handle and push it until it clicks into place.
• فصل النصل: Press the eject button on the back of the blade and slide it off the handle.
• Attaching Stubble Combs: Select the desired stubble comb (1mm, 3mm, or 5mm). Snap the comb onto the blade until it securely locks.
• Detaching Stubble Combs: Gently pull the comb away from the blade.

Image: The Philips OneBlade device is shown alongside its three detachable stubble combs (1mm, 3mm, 5mm). The combs are designed to snap onto the blade for precise trimming lengths.

تعليمات التشغيل

The Philips OneBlade can be used for shaving, trimming, and edging. It is 100% waterproof, allowing for wet or dry use, even in the shower, without the need for shaving cream.

حلق

• Ensure the blade is clean and properly attached.
• اضغط على زر الطاقة لتشغيل الجهاز.
• Move the OneBlade against the grain of your hair. The blade follows the contours of your face for a comfortable shave.
• Note that the OneBlade does not shave as close as a traditional blade, which helps prevent skin irritation.

التشذيب

• Attach one of the three stubble combs (1mm, 3mm, or 5mm) to achieve your desired beard length.
  • 1mm comb: For a 5 o'clock shadow look.
  • 3mm comb: For a tight, short trim.
  • 5mm comb: For a longer stubble.
• Turn on the device and move it against the direction of hair growth to trim evenly.

الحواف

• Remove any attached stubble comb.
• Use the dual-sided blade to create precise edges and clean lines.
• Move the blade in any direction to shape your beard or create sharp lines.

صيانة

تنظيف

• بعد كل استخدام، قم بإيقاف تشغيل الجهاز.
• Rinse the blade and the device under running tap water. The OneBlade is 100% waterproof.
• Shake off excess water and allow the device to air dry completely before storing or recharging.

استبدال الشفرة

• The durable stainless steel blade is designed to last up to 4 months with typical use (based on 2 full shaves per week).
• When the replacement indicator (eject icon) appears on the blade, it signifies that the blade's performance may no longer be optimal.
• To replace the blade, press the eject button and slide off the old blade. Snap a new Philips OneBlade replacement blade into place.

استكشاف الأخطاء وإصلاحها

إذا واجهت أي مشاكل مع جهاز Philips OneBlade الخاص بك، فيرجى الرجوع إلى الحلول الشائعة التالية:

• الجهاز لا يعمل: Ensure the device is fully charged. If the battery is depleted, charge it for 8 hours.
• أداء الحلاقة ضعيف: The blade may need replacement. Check for the eject icon indicator. Ensure the blade is clean and free of hair debris.
• تهيج: Ensure you are using the device correctly, moving it against the grain. If irritation persists, ensure the blade is not dull and consider replacing it.
• للحصول على مزيد من المساعدة، يرجى الاتصال بدعم عملاء فيليبس.

تحديد

الضمان والدعم

للحصول على معلومات الضمان ودعم العملاء، يرجى الرجوع إلى الوثائق المرفقة مع عملية الشراء أو زيارة موقع Philips الرسمي webالموقع. احتفظ بإثبات الشراء الخاص بك لاستخدامه في أي مطالبات بالضمان.