ديوالت DWHT35625S

DEWALT ToughSeries 25ft Illuminated Tape Measure (DWHT35625S)

دليل المستخدم

مقدمة

The DEWALT ToughSeries 25ft Illuminated Tape Measure (Model DWHT35625S) is engineered for durability and enhanced visibility in demanding work environments. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your tape measure.

DEWALT ToughSeries 25ft Illuminated Tape Measure front view

الشكل 1: الجبهة view of the DEWALT ToughSeries 25ft Illuminated Tape Measure.

يثبت

الشحن الأولي

Before first use, fully charge the integrated LED battery. The tape measure includes a USB charging cable for convenience.

  • Locate the USB charging port on the side of the tape measure.
  • Connect the provided USB cable to the tape measure and a compatible USB power source (e.g., wall adapter, computer USB port).
  • سيضيء مؤشر الشحن أثناء الشحن.
  • Allow approximately 3 hours for a full charge. A full charge provides up to 3 hours of continuous LED runtime.
DEWALT ToughSeries tape measure with USB cable

Figure 2: The DEWALT ToughSeries tape measure showing the included USB charging cable.

DEWALT ToughSeries tape measure being charged via USB

Figure 3: The tape measure connected to a power source for charging.

تعليمات التشغيل

تمديد وسحب الشفرة

  • To extend the blade, pull the end hook away from the case.
  • To retract the blade, release the end hook and allow the blade to smoothly return into the case. Guide the blade to prevent rapid retraction.

Using the Slide Lock

  • To lock the blade at a desired measurement, push the slide lock button forward.
  • لتحرير القفل، اسحب زر قفل الشريحة إلى الخلف.

Activating the LED Light

The integrated LED light illuminates the measurement area for improved visibility in low-light conditions.

  • Press the LED power button (typically located near the blade opening) to turn the light on.
  • اضغط على الزر مرة أخرى لإطفاء الضوء.
  • The LED features an automatic shut-off function after 60 seconds of inactivity to conserve battery life.
DEWALT ToughSeries tape measure with LED light active during measurement

Figure 4: The LED light illuminates the measurement area for clear readings.

قياسات القراءة

The tape measure features a double-sided blade print, allowing for easy reading from various angles, including overhead measurements.

DEWALT ToughSeries tape measure showing double-sided blade for overhead measurements

Figure 5: The double-sided blade print facilitates overhead measurements.

صيانة

تنظيف

  • Regularly wipe the blade and case with a clean, damp قطعة قماش لإزالة الغبار والحطام.
  • Avoid using harsh chemicals or abrasive cleaners, as these can damage the blade markings or case finish.
  • Ensure the blade is dry before fully retracting it into the case to prevent rust.

العناية بالبطارية

  • Recharge the battery when the LED light dims or fails to illuminate.
  • للتخزين طويل الأمد، اشحن البطارية إلى حوالي 50% وخزنها في مكان بارد وجاف.

تخزين

  • Store the tape measure in a dry environment, away from extreme temperatures.
  • The ToughSeries design provides a 100ft drop rating, but proper storage helps prolong the tool's lifespan.

استكشاف الأخطاء وإصلاحها

ضوء LED لا يعمل

  • تحقق من مستوى البطارية: The battery may be depleted. Connect the tape measure to a USB power source and allow it to charge for at least 30 minutes before attempting to use the LED again.
  • Ensure Proper Activation: Press the LED power button firmly.

الشفرة لا تنسحب بسلاسة

  • تنظيف الشفرة: Dust, dirt, or debris on the blade can hinder retraction. Extend the blade fully and carefully wipe it clean with a damp قطعة قماش.
  • التحقق من وجود عوائق: Inspect the blade opening for any foreign objects that might be blocking the blade's path.

Slide Lock Not Engaging/Disengaging

  • إزالة الحطام: Ensure no debris is lodged around the slide lock mechanism.
  • التشغيل السليم: Confirm you are pushing the slide lock fully forward to engage and fully backward to disengage.

تحديد

ميزةمواصفة
ماركةDEWALT
رقم الموديلDWHT35625S
طول الشفرة25 أقدام
دقة القياس± 1/16 inches per 10 feet
نوع القفلالشريحة
مادة العلبةPlastic or Metal Alloy
مادة الشفرةالفولاذ المقاوم للصدأ
LED RuntimeUp to 3 hours continuous (with 60-second auto-off)
تقييم السقوط100 قدم

معلومات الضمان

DEWALT products are typically covered by a limited warranty. For specific warranty terms and conditions applicable to your region and product, please refer to the official DEWALT webالموقع أو تواصل مع خدمة العملاء. احتفظ بإثبات الشراء لطلبات الضمان.

دعم العملاء

For technical assistance, replacement parts, or further inquiries regarding your DEWALT ToughSeries 25ft Illuminated Tape Measure (Model DWHT35625S), please visit the official DEWALT website or contact their customer service department. When contacting support, please have your model number (DWHT35625S) and purchase details readily available.

© ٢٠٢٥ دي والت. جميع الحقوق محفوظة.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.