Nikai 3-Tap Water Dispenser with Refrigerator

مقدمة

Thank you for choosing the Nikai 3-Tap Water Dispenser with Refrigerator. This appliance is designed to provide convenient access to hot, normal, and cold water, along with a compact refrigeration compartment. Please read this manual carefully before operating the dispenser to ensure safe and efficient use.

المميزات الرئيسية:

• Compressor cooling for efficient cold water production.
• Durable stainless steel water tank.
• Anti-bacterial design for improved hygiene.
• Integrated 16-liter refrigerator/cabinet.
• تشغيل منخفض الضوضاء.

تعليمات السلامة

اتبع دائمًا احتياطات السلامة الأساسية عند استخدام الأجهزة الكهربائية لتقليل خطر الحريق والصدمة الكهربائية والإصابة.

• تأكد من حجم امدادات الطاقةtage matches the rating label on the dispenser.
• لا تغمر الجهاز أو السلك أو القابس في الماء أو السوائل الأخرى.
• Unplug the dispenser from the outlet when not in use, before cleaning, or before performing any maintenance.
• Keep children away from the hot water tap to prevent burns.
• لا تقم بتشغيل الموزع باستخدام سلك أو قابس تالف.
• Place the dispenser on a stable, level surface to prevent tipping.
• Ensure adequate ventilation around the unit, especially at the rear.
• لا تسد فتحات التهوية.
• هذا الجهاز مخصص للاستخدام المنزلي فقط.

يثبت

1. فك التعبئة: Carefully remove the dispenser from its packaging. Retain packaging materials for future transport or storage.
2. الموقع: Position the dispenser on a firm, level surface. Ensure there is at least 10-15 cm of space from walls or other objects to allow for proper ventilation, especially at the back where the compressor is located. Avoid direct sunlight or heat sources.
3. تركيب زجاجة المياه: Clean the neck of a standard 3 or 5-gallon water bottle. Remove the protective seal from the bottle. Place the bottle firmly onto the top loading receptacle of the dispenser. Ensure it is seated correctly and water begins to flow into the internal tanks.
4. التنظيف الأولي: Before connecting to power, dispense at least 1 liter of water from each tap (hot, normal, cold) to flush out any dust or impurities from the internal lines. This also ensures the tanks are filled before heating/cooling elements are activated.
5. توصيل الطاقة: قم بتوصيل سلك الطاقة بمأخذ كهربائي أرضي.
6. التبريد/التسخين الأولي: Allow the unit to operate for at least 30-60 minutes before dispensing water for optimal temperature. The hot and cold indicators will illuminate when ready.

تعليمات التشغيل

1. تشغيل/إيقاف التشغيل: The dispenser typically has separate switches for hot and cold water functions, usually located at the back of the unit. Turn them on as desired. The normal water tap does not require power.
2. صرف المياه:
   • الماء البارد: Place a cup under the blue tap. Press the lever or button to dispense cold water.
   • ماء عادي: Place a cup under the yellow tap. Press the lever or button to dispense room temperature water.
   • الماء الساخن: Place a cup under the red tap. For safety, the hot water tap usually has a child-safety lock. Push the safety button and then press the lever or button to dispense hot water. Exercise caution to prevent burns.
3. حجرة الثلاجة: The lower compartment functions as a small refrigerator. Open the door to store beverages or small items. Note that its cooling capacity is less than a standard refrigerator.
4. استبدال زجاجة الماء: When the water bottle is empty, lift it off the dispenser. Replace with a new, full bottle following the installation steps in the Setup section.

صيانة

Regular cleaning and maintenance will prolong the life of your water dispenser and ensure water quality.

1. تنظيف الجزء الخارجي: امسحي الأسطح الخارجية بقطعة ناعمة ، دamp القماش. لا تستخدم المنظفات أو المذيبات الكاشطة.
2. صينية التنقيط: يجب تفريغ صينية التنقيط وتنظيفها بانتظام لمنع الفيضان ونمو البكتيريا. قم بإزالة الصينية، واغسلها بالماء والصابون الخفيف، ثم اشطفها جيداً، وأعد تركيبها.
3. تفريغ الوحدة: Periodically, or before long periods of non-use, drain the internal tanks. Unplug the unit. Locate the drain plugs (usually at the back or bottom). Place a bucket underneath and remove the plugs to drain all water. Replace plugs securely after draining.
4. التنظيف الداخلي (إزالة الترسبات الكلسية): For optimal performance and hygiene, internal tanks should be cleaned every 3-6 months. Consult a qualified technician or refer to specific descaling instructions if provided by the manufacturer. Do not attempt to clean internal components without proper guidance.

استكشاف الأخطاء وإصلاحها

قبل الاتصال بخدمة العملاء، يرجى التحقق من المشكلات الشائعة التالية:

تحديد

الضمان والدعم

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact Nikai customer service directly. Keep your purchase receipt as proof of purchase.