مقدمة
This manual provides essential information for the setup and operation of your new Generic replacement remote control. This remote is specifically designed to be compatible with Intertek IF-40FSB, IF-50FSB, and IF-60FSB 3D Electric Fireplace Insert Heaters, offering a convenient way to control your fireplace functions.
The remote control is pre-programmed and requires no additional setup or pairing. Simply insert the correct batteries, and it will be ready for use.
محتويات الحزمة
- جهاز تحكم عن بعد بديل عام واحد
Note: Batteries and additional instructions are not included in the package. Please refer to this manual for operational guidance.
الإعداد: تركيب البطارية
Before using your remote control, you must install the batteries. This remote requires two (2) AAA batteries.
- حدد موقع حجرة البطارية في الجزء الخلفي من جهاز التحكم عن بعد.
- حرك غطاء حجرة البطارية لفتحه.
- Insert two (2) AAA batteries, ensuring that the positive (+) and negative (-) ends align correctly with the markings inside the compartment.
- أغلق غطاء حجرة البطارية جيدًا.
Once batteries are installed, the remote control is ready for immediate use with your compatible Intertek electric fireplace.
الصورة: الجبهة view of the Generic Replacement Remote Control. This image displays the layout of the six primary function buttons: Power, 'F' for function, Flame effect, Heat/Blower, Light, and Timer.
تعليمات التشغيل
Point the remote control directly at your Intertek electric fireplace insert to ensure proper communication. The remote operates on infrared (IR) technology, so ensure there are no obstructions between the remote and the fireplace's IR receiver.
| أيقونة الزر | وظيفة | وصف |
|---|---|---|
| ⑂ (Power Symbol) | تشغيل/إيقاف الطاقة | يقوم بتشغيل أو إيقاف تشغيل وحدة المدفأة. |
| F | Function / Flame Effect | Cycles through different flame effects or other functions depending on the fireplace model. |
| 🔥 (Flame Icon) | Flame Brightness/Mode | Adjusts the brightness of the flame effect or changes flame modes. |
| ∷ (Wavy Lines Icon) | Heat/Blower Control | Activates or adjusts the heater and blower settings. Press repeatedly to cycle through heat levels or turn off. |
| 💡 (Light Bulb Icon) | التحكم في الضوء | Controls the internal lighting of the fireplace, such as ember bed lights or accent lights. |
| ⏱ (Clock/Timer Icon) | وظيفة المؤقت | Sets a timer for the fireplace to automatically turn off after a specified duration. Refer to your fireplace manual for specific timer settings. |
استكشاف الأخطاء وإصلاحها
- جهاز التحكم عن بعد لا يستجيب:
- Ensure new AAA batteries are correctly installed with proper polarity.
- تحقق مما إذا كانت البطاريات قد استنفدت واستبدلها إذا لزم الأمر.
- Ensure there are no obstructions between the remote and the fireplace's infrared receiver.
- Make sure you are within the effective range of the fireplace's receiver.
- عملية متقطعة:
- This could indicate low battery power. Replace batteries.
- Ensure a clear line of sight to the fireplace.
تحديد
| ميزة | التفاصيل |
|---|---|
| نوع المنتج | استبدال جهاز التحكم عن بعد |
| التوافق | Intertek IF-40FSB, IF-50FSB, IF-60FSB 3D Electric Fireplace Insert Heaters |
| مصدر الطاقة | 2 بطاريات AAA (غير مدرجة) |
| أبعاد | حوالي 4.96 × 4.29 × 0.55 بوصة (12.6 × 10.9 × 1.4 سم) |
| وزن العنصر | حوالي 0.528 أونصة (15 جرامًا) |
| رقم الموديل | 7c748f42-a80f-4ac1-aec5-4df0762316bc |
الضمان والدعم
As a generic replacement product, specific warranty details may vary. Please refer to the seller or your purchase documentation for any applicable warranty information or support inquiries.
For issues related to your Intertek electric fireplace, please consult the original fireplace manual or contact Intertek customer support directly.