Saramonic Blink300 B4 Wireless Lavalier Microphone User Manual

مقدمة

The Saramonic Blink300 B4 is a dual-channel 2.4GHz wireless lavalier microphone system designed for use with Apple iPhone and iPad devices. It features an MFi Certified Lightning Port receiver and two rechargeable transmitters, enabling high-quality audio recording for interviews, vlogs, live streams, and other content creation scenarios involving two individuals.

This system operates on the 2.4GHz frequency spectrum, automatically selecting clear channels to minimize interference and ensure stable audio transmission. Key features include noise reduction technology for clear sound and a compact, portable design for ease of use.

ماذا يوجد في الصندوق

يرجى التحقق من محتويات الحزمة للتأكد من وجود جميع العناصر:

• 2 x Blink300 Transmitters (TX)
• 1 x Blink300 RXDi Receiver (Lightning Connector)
• 2 × كابلات شحن USB-C
• 2 × واقيات رياح من الفرو
• 1 × دبوس الاقتران

هيكل المنتج

This image illustrates the key components of the Blink300 TX transmitter and the Blink300 RXDi receiver. The transmitter features a built-in microphone, status indicator, power/mute/pair button, belt clip, gain control buttons, noise cancellation button, USB-C charging port, and a 3.5mm MIC IN jack. The receiver includes a pair M/S pinhole, MFi Certified Lightning Connector, and a status indicator.

Blink300 Transmitter (TX)

• ميكروفون مدمج: يلتقط الصوت.
• مؤشر الحالة: Displays power, pairing, and battery status.
• زر التشغيل/كتم الصوت/الاقتران: Controls power, mutes the microphone, and initiates pairing.
• مشبك الحزام: لتثبيت جهاز الإرسال على الملابس.
• Gain Control (+/- Buttons): Adjusts microphone input level.
• زر إلغاء الضوضاء: Activates or deactivates noise reduction.
• منفذ شحن USB-C: لشحن البطارية الداخلية.
• 3.5mm MIC IN Jack: لتوصيل ميكروفون خارجي صغير (غير مرفق).

Blink300 RXDi Receiver

• Pair M/S Pinhole: Used with the included pairing pin to initiate pairing.
• MFi Certified Lightning Connector: Connects directly to Apple iOS devices (iPhone, iPad).
• مؤشر الحالة: يعرض حالة الاتصال.

الإعداد والاقتران

Follow these steps to set up and pair your Saramonic Blink300 B4 system:

1. Charge Transmitters: Before first use, fully charge both Blink300 Transmitters using the provided USB-C charging cables. The status indicator will show charging progress.
2. تشغيل أجهزة الإرسال: Press and hold the power button on each transmitter for 5 seconds to turn them on. The status indicator will light up.
3. Initiate Pairing on Transmitters: With the transmitters powered on, press and hold the power button again for 5 seconds to enter pairing mode. The status indicator will blink rapidly.
4. توصيل جهاز الاستقبال: Plug the Blink300 RXDi receiver directly into the Lightning port of your iPhone or iPad. The receiver's status indicator will light up.
5. Initiate Pairing on Receiver: Use the included pairing pin to press and hold the small pinhole button on the RXDi receiver for 5 seconds. The receiver's status indicator will blink rapidly.
6. تأكيد الاقتران: The transmitters and receiver will automatically pair within 5 seconds. Once successfully paired, the status indicators on both the transmitters and receiver will turn solid blue.
7. جاهز للاستخدام: Your Saramonic Blink300 B4 system is now ready for recording.

This image visually guides through the setup process: 1. Pressing the transmitter button, 2. Plugging the receiver into an iOS device, and 3. Confirming the connected status. This process ensures automatic pairing for immediate use.

ملحوظة: For optimal performance, avoid significant obstacles like walls and buildings, and keep away from other 2.4GHz devices (e.g., Wi-Fi antennas, radios) that may cause interference.

تعليمات التشغيل

ارتداء جهاز الإرسال

Attach the transmitter to your clothing using the belt clip. Position the built-in microphone approximately 6-8 inches (15-20 cm) from your mouth for optimal audio capture. For best results, use the included fur windshield to reduce wind noise when recording outdoors.

Adjusting Gain (Volume)

Use the '+' and '-' gain control buttons on the side of the transmitter to adjust the microphone's input level. Monitor your audio levels on your recording device to prevent clipping or distortion.

وظيفة كتم الصوت

Briefly press the Power/Mute/Pair button on the transmitter to mute or unmute the microphone. The status indicator will change to reflect the mute status (e.g., blinking slowly or changing color, refer to the status indicator guide for details).

إلغاء الضوضاء

The Blink300 B4 features an innovative noise reduction technology to minimize ambient background noise, ensuring clearer audio recordings.

• Activating Noise Cancellation: Press the dedicated Noise Cancellation button on the transmitter to turn the function on.
• Deactivating Noise Cancellation: Press the Noise Cancellation button again to turn the function off.

This diagram illustrates the effect of noise cancellation, showing how unwanted background frequencies are reduced, resulting in a cleaner audio signal.

الشحن

The Blink300 Transmitters are equipped with internal rechargeable batteries. The RXDi receiver is powered directly by the connected iOS device.

• شحن الارسال: Use the included USB-C charging cables to charge the transmitters. Connect the USB-C end to the transmitter's charging port and the other end to a standard USB power adapter (not included).
• عمر البطارية: A fully charged transmitter provides up to 6 hours of operating time.
• مؤشر الشحن: The status indicator on the transmitter will show the charging status. Refer to the product's LED indicator guide for specific light patterns.

This image highlights the USB-C charging port on the transmitter, indicating where to connect the charging cable.

التوافق

The Saramonic Blink300 B4 system is designed for wide compatibility with Apple iOS devices:

• آيفون: iPhone 5/6/7, 7 Plus, 8, 8 Plus, X, XR, XS, XS Max, 11, 11 Pro, 11 Pro Max, 12, 12 Pro, and newer models with a Lightning port.
• أجهزة iPad: iPad 2/3/4, iPad Air series, iPad Pro series, and newer models with a Lightning port.

It supports recording on various online social media platforms and applications, including but not limited to:

• جوجل ميت
• تيك توك
• تكبير
• يوتيوب
• فيسبوك
• سكايب

This image demonstrates the broad compatibility of the Blink300 B4 with different iPhone and iPad models, as well as popular social media and communication platforms.

صيانة

• تنظيف: استخدم قطعة قماش ناعمة وجافة لتنظيف الميكروفون وجهاز الاستقبال. تجنب استخدام المواد الكيميائية القاسية أو المواد الكاشطة.
• تخزين: قم بتخزين النظام في مكان بارد وجاف بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى.
• العناية بالبطارية: For optimal battery longevity, avoid fully discharging the transmitters frequently. If storing for extended periods, charge the batteries to approximately 50% every few months.
• Windshield Care: The fur windshields can be gently cleaned with mild soap and water, then air-dried completely before re-use.

استكشاف الأخطاء وإصلاحها

تحديد

الضمان والدعم

Saramonic provides a ضمان لمدة 2 سنوات for the Blink300 B4 Wireless Lavalier Microphone system.

For technical support, warranty claims, or any product-related inquiries, please contact Saramonic customer service directly. Refer to the official Saramonic webللحصول على أحدث معلومات الاتصال، يرجى زيارة الموقع الإلكتروني أو الاطلاع على وثائق الشراء الخاصة بك.

يرجى الاحتفاظ بإثبات الشراء للتحقق من صحة الضمان.