1. المقدمة
This instruction manual provides detailed guidance for the safe and proper installation, operation, and maintenance of your FORGING MOUNT Corner TV Wall Mount, Model HY9441. This full-motion TV mount is designed to fit TVs and monitors ranging from 13 to 43 inches, supporting a maximum weight of 77 lbs (35 kg) and VESA patterns up to 200x200mm. Its long 25.6-inch extension arm allows for versatile viewing angles, including corner installations.

Figure 1: FORGING MOUNT Corner TV Wall Mount (Model HY9441)
2. معلومات السلامة
Please read and understand all instructions before installation and use. If you have any questions, contact customer service. Improper installation or use may result in property damage, serious injury, or death.
- قدرة الوزن: Do not exceed the maximum weight capacity of 77 lbs (35 kg). This mount is intended for use only with the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in instability causing possible injury.
- نوع الجدار: This mount is designed for installation on solid concrete walls, brick walls, and solid wood stud walls (12"/16" wood studs). DO NOT mount the product on plaster walls, cavity walls, drywall, or soft walls alone. Always ensure the mounting surface can safely support the combined weight of the equipment and all attached hardware.
- التوافق مع VESA: Ensure your TV's VESA mounting pattern (the distance between the four mounting holes on the back of the TV) is compatible with the mount (75x75mm, 100x100mm, 100x200mm, 200x100mm, 200x200mm).
- المساعدة المهنية: إذا كنت غير متأكد من عملية التركيب أو مدى ملاءمة الجدار الخاص بك، فاستشر متخصصًا مؤهلًا.
- أطفال: أبقِ الأطفال بعيدًا عن منطقة التثبيت أثناء الإعداد.
- أدوات: Use appropriate tools and follow all safety precautions for tool usage.

Figure 2: Compatible Wall Types for Installation
3. محتويات العبوة
Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, do not attempt to install. Contact customer service for assistance.
- Wall Plate Assembly with Articulating Arms
- TV Plate (VESA compatible)
- مجموعة أدوات التثبيت (مسامير متنوعة، وغسالات، وفواصل للتلفزيون والجدار)
- المراسي الخرسانية (إن وجدت)
- مقياس المستوى
- روابط الكابلات
- دليل التعليمات
4. مواصفات المنتج
- Long Extension Arm: Equipped with a 25.6-inch long extension arm, allowing the TV to be pulled out from the wall for versatile viewing angles, including corner installations.
- إمكانية الحركة الكاملة: Offers swivel of ±90°, tilt of +5° to -10°, and level adjustment of ±3° for optimal viewجي الراحة.
- البناء الثقيل: Made with high-quality thickened alloy steel for stability and durability, supporting TVs up to 77 lbs.
- التوافق مع VESA: Supports VESA patterns 75x75mm, 100x100mm, 100x200mm, 200x100mm, and 200x200mm.
- تصميم موفر للمساحة: Can be retracted to a minimum distance of 2.48 inches from the wall, allowing the TV to sit close to the wall when not extended.

Figure 3: Robust Construction of the Mount

Figure 4: Versatile Application in Different Environments
5. الإعداد (دليل التثبيت)
5.1 قائمة التحقق من التثبيت المسبق
- Ensure you have all necessary tools: drill, stud finder (for wood studs), level, tape measure, pencil, screwdriver, socket wrench.
- تأكد من أن وزن جهاز التلفزيون الخاص بك ونمط VESA يقعان ضمن مواصفات الحامل.
- Identify the type of wall you are mounting to (wood stud, concrete, or brick).
- Locate the center of your desired mounting position and mark it.
5.2 خطوات التثبيت
- قم بتثبيت حوامل التلفزيون على التلفزيون: Carefully place your TV face down on a soft, clean surface. Attach the two vertical TV brackets to the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and securely fastened to the TV's VESA holes.
- لوحة تثبيت على الحائط: Position the wall plate assembly on the wall at your desired height. Use a level to ensure it is perfectly horizontal. Mark the drilling locations through the holes on the wall plate. For wood studs, drill pilot holes into the center of the studs. For concrete/brick walls, drill holes and insert concrete anchors. Secure the wall plate to the wall using the provided lag bolts.
- Adjust Level (if needed): Before hanging the TV, ensure the wall plate is level. If minor adjustments are needed, some mounts allow for slight leveling adjustments on the wall plate itself.
- تعليق التلفزيون على لوحة الحائط: With assistance, carefully lift the TV with the attached brackets and hook them onto the arms of the wall plate assembly. Ensure the TV is securely seated.
- تثبيت التلفزيون على الحامل: Tighten the security screws on the TV brackets to lock the TV onto the mount, preventing accidental dislodgement.

الشكل 5: انتهىview of 4 Installation Steps
6. Operating (Adjustments)
Your FORGING MOUNT TV wall mount offers full motion capabilities for optimal viewing. Adjustments should be made carefully to avoid damage to the TV or mount.
- قطب: The mount allows for ±90° swivel. Gently push or pull the TV to the desired left or right angle. This is particularly useful for corner installations or viewing from different areas of a room.
- الإمالة: Adjust the vertical tilt from +5° (upward) to -10° (downward) to reduce glare or achieve a better viewing angle. Loosen the tilt adjustment screws on the TV plate, adjust the angle, and then re-tighten the screws securely.
- مستوى: If your TV appears slightly unlevel after installation, you can adjust the level by ±3°. Loosen the leveling screws, rotate the TV slightly, and then re-tighten.
- التمديد/الانكماش: The articulating arms allow the TV to extend up to 25.6 inches from the wall and retract to a minimum of 2.48 inches. Gently pull or push the TV to extend or retract the arms.

Figure 6: Swivel and Tilt Capabilities
Video 1: Demonstration of Corner TV Wall Mount Movement (Swivel, Tilt, Extension, Leveling)
7. الصيانة
تضمن الصيانة المنتظمة طول عمر حامل التلفزيون الخاص بك وتشغيله بشكل آمن.
- تنظيف: نظّف الحامل بانتظام بقطعة قماش ناعمة وجافة. وللأوساخ المستعصية، استخدم قطعة قماش ناعمة قليلاً.amp امسح بقطعة قماش ومنظف معتدل، ثم جفف. تجنب استخدام المنظفات الكاشطة أو المذيبات.
- التحقق من الاتصالات: افحص جميع البراغي والصواميل بشكل دوري للتأكد من إحكامها وثباتها. أعد ربطها إذا لزم الأمر.
- فحص الضرر: Inspect the mount for any signs of wear, corrosion, or damage. If any damage is observed, discontinue use and contact customer service.
8. استكشاف الأخطاء وإصلاحها
يرجى الرجوع إلى الجدول أدناه للتعرف على المشكلات الشائعة وحلولها.
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| التلفاز ليس مستويا. | Wall plate not perfectly level during installation, or leveling screws need adjustment. | Loosen the leveling screws on the TV plate, adjust the TV to be level using a spirit level, then re-tighten the screws. |
| الجبل يشعر بعدم الإستقرار. | Mounting bolts not fully tightened, incorrect wall anchors used, or wall type is unsuitable. | Ensure all wall bolts are securely tightened. Verify that the correct anchors were used for your wall type. If unsure, consult a professional. Do not use if unstable. |
| صعوبة في ضبط الإمالة/الدوران. | Adjustment screws are too tight, or joints need lubrication. | For tilt, loosen the tilt adjustment screws slightly, adjust, then re-tighten. For swivel, ensure no cables are snagged. Joints are pre-lubricated; if stiffness persists, contact support. |
| TV is too heavy for the mount. | TV weight exceeds the mount's maximum capacity. | Immediately remove the TV from the mount. This mount supports up to 77 lbs (35 kg). Do not use if your TV is heavier. |
9. المواصفات
| رقم الموديل: | HY9441 |
| أحجام التلفزيون المتوافقة: | 13 - 43 بوصة |
| سعة التحميل القصوى: | 77 رطل (35 كجم) |
| التوافق مع VESA: | 75x75mm, 100x100mm, 100x200mm, 200x100mm, 200x200mm |
| زاوية الميل: | +5° إلى -10° |
| زاوية دوارة: | ±90 درجة |
| تعديل المستوى: | ±3 درجة |
| المسافة بين الجدار (في وضع الانكماش): | 2.48 بوصة (63 مم) |
| مسافة الجدار (ممتدة): | 25.6 بوصة (650 مم) |
| مادة: | سبائك الفولاذ |
| أبعاد المنتج: | 16 × 2.75 × 25.6 بوصة |
| وزن السلعة: | 5 رطل |

Figure 7: TV Compatibility and Load Capacity

Figure 8: Mount Dimensions
10. الضمان والدعم
FORGING MOUNT is committed to providing high-quality products and excellent customer service. For any questions, concerns, or assistance with your product, please contact our customer support team.
- خدمة العملاء: Refer to the contact information provided with your product packaging or visit the official FORGING MOUNT webموقع للدعم.
- ضمان: Information regarding product warranty can be found on the FORGING MOUNT website or by contacting customer service directly. Please retain your proof of purchase for warranty claims.