ANENG PN200

ANENG PN200 Digital Clamp دليل تعليمات جهاز القياس المتعدد

الموديل: PN200

1. انتهى المنتجview

The ANENG PN200 is a versatile digital clamp meter multimeter designed for accurate measurement and troubleshooting of electrical systems. It combines the functions of a clamp meter and a multimeter, offering a wide range of measurement capabilities for both AC and DC circuits.

ANENG PN200 Digital Clamp Meter showing multiple functions

Image: ANENG PN200 Digital Clamp Meter highlighting its multiple functions including AC/DC Voltage, AC/DC Current, Max Count, Backlit Screen, Hertz, Resistance, Capacitance, Diode/Buzzer, Data Retention, Automatic Shutdown, NCV, and Relative Measurement.

2. محتويات العبوة

Your ANENG PN200 package includes the following items:

  • 1x ANENG PN200 Digital Clamp متر
  • 2 × بطاريات AAA
  • 1x Combination Test Lead Set (includes 4 connection sockets, 2 PVC cables, 2 copper needles, 2 U-shaped inserts, 2 meter pens, 2 alligator clips, 2 puncture needles)
  • 1x Multimeter Test Lead Set
  • 1 × كابل شحن
  • 1 × دليل التعليمات
  • شنومكس حقيبة التخزين

3. الإعداد

3.1 تركيب البطارية

  1. حدد مكان غطاء حجرة البطارية على الجزء الخلفي للجهاز.
  2. Slide the cover off to open the compartment.
  3. قم بإدخال بطاريتين AAA، مع التأكد من القطبية الصحيحة (+/-).
  4. قم بإدخال غطاء حجرة البطارية في مكانه مرة أخرى حتى يصدر صوت نقرة آمنة.

3.2 توصيل أسلاك الاختبار

  1. للمجلدtage, resistance, capacitance, diode, and continuity measurements, insert the black test lead into the 'COM' (common) jack.
  2. Insert the red test lead into the 'VΩHz' jack.
  3. Ensure connections are firm before use.

4. تعليمات التشغيل

The ANENG PN200 features a rotary dial for selecting measurement functions and dedicated buttons for additional features.

4.1 اختيار الوظيفة

Turn the rotary dial to select the desired measurement function:

  • الخامس ~: المجلد ACtagالقياس الإلكتروني
  • الخامس-: المجلد العاصمةtagالقياس الإلكتروني
  • أ~: AC Current measurement (using clamp)
  • أ-: DC Current measurement (using clamp)
  • أوم: قياس المقاومة
  • هرتز: قياس التردد
  • السعة: قياس السعة
  • الصمام الثنائي/الاستمرارية: Diode test and Continuity check
  • القيمة الحالية: حجم عدم الاتصالtagكشف البريد

4.2 الوظائف الرئيسية

  • H/HOLD: Short press to hold the current reading on the display. Long press to activate/deactivate the backlight.
  • ريل: Used for relative measurement, setting the current reading as a reference point. For capacitance, press to zero out the meter before clampعمل.
  • جلس: Used to switch between different sub-functions within a main dial setting (e.g., AC/DC for current, Diode/Continuity).

4.3 قياسات محددة

Below are common measurement procedures:

AC / DC Voltagهـ القياس

  1. Turn the dial to 'V~' for AC voltage or 'V-' for DC voltage.
  2. Connect the test leads to the circuit points you wish to measure.
  3. اقرأ المجلدtagقيمة البريد على الشاشة.

قياس التيار المتردد/المستمر (Clamp)

  1. Turn the dial to 'A~' for AC current or 'A-' for DC current.
  2. افتح الكلamp jaws and enclose a single conductor (not a bundle of wires).
  3. اقرأ القيمة الحالية المعروضة على الشاشة.
  4. ملحوظة: For accurate DC current measurements, ensure to press the 'REL' button to zero out the meter before clampعمل.
ANENG PN200 Digital Clamp Meter measuring high precision AC/DC current

Image: ANENG PN200 Digital Clamp Meter demonstrating high precision 600A AC/DC current measurement capability.

Resistance, Capacitance, Diode, Continuity, Frequency

  1. Turn the dial to the respective function symbol (Ω, Capacitance, Diode/Continuity, Hz).
  2. Connect the test leads to the component or circuit.
  3. For Diode/Continuity, use the 'SET' button to toggle between modes. A beep indicates continuity.
  4. For Capacitance, ensure the capacitor is discharged before measurement.
ANENG PN200 Digital Clamp Meter showing various measurement functions

Image: ANENG PN200 Digital Clamp Meter displaying its comprehensive measurement capabilities including DC Voltagه ، AC Voltage, Capacitance, Diode, Capacitive Discharge, and Resistance.

حجم عدم الاتصالtagكشف (NCV).

  1. Turn the dial to 'NCV'.
  2. أحضر الجزء العلوي من المشبكamp عداد بالقرب من فولت التيار المترددtagالمصدر هـ.
  3. The meter will beep and an indicator light will illuminate if AC voltagتم الكشف عن ذلك.
ANENG PN200 Digital Clamp Meter performing NCV detection

Image: ANENG PN200 Digital Clamp Meter detecting non-contact induced electricity from a wall outlet.

4.4 Official Product Video Demonstration

Video: An official product video from ANENG Stores demonstrating various features and operations of the PN200 Digital Clamp متر.

5. الصيانة

5.1 التنظيف

امسح الجهاز بقطعة قماش جافة وناعمة. لا تستخدم منظفات أو مذيبات كاشطة.

5.2 استبدال البطارية

If the low battery indicator appears on the display, replace the AAA batteries as described in the Setup section.

5.3 التخزين

قم بتخزين clamp meter and its accessories in the provided storage bag in a cool, dry place away from direct sunlight and extreme temperatures.

6. استكشاف الأخطاء وإصلاحها

  • Ask a question about this manual

    Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.