1. المقدمة
This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your SanDisk Professional G-RAID Shuttle 8-Bay 160TB Thunderbolt 3 RAID Array. Please read this guide thoroughly before using the device to ensure optimal performance and data integrity.
2. مواصفات المنتج
- سعة هائلة: Offers up to 160TB of RAID storage, suitable for demanding workflows.
- High-Speed Data Transfers: Achieves read speeds up to 1900MB/s and write speeds up to 2000MB/s via Thunderbolt 3 (40Gbps) and USB-C (10Gbps), ideal for multi-stream 4K, 8K, and VR editing.
- Built-in Hardware RAID: Pre-configured with RAID 5 for balanced performance, with options to switch to RAID 0, 1, 6, 10, 50, 60, or JBOD for ultimate flexibility.
- Removable, Enterprise-class Ultrastar Hard Drives: Powered by eight removable Ultrastar hard drives for enhanced reliability, suitable for mission-critical footage.
- Daisy-chaining and USB Power Delivery: Connect up to 5 additional devices with dual Thunderbolt 3 ports and power your MacBook with up to 85W USB-C Power Delivery.
3. دليل الإعداد
Follow these steps to set up your G-RAID Shuttle 8:
- فك الجهاز: Carefully remove the G-RAID Shuttle 8 from its packaging. Ensure all components, including the power cable and Thunderbolt 3 cable, are present.
- وضع الجهاز: Place the unit on a stable, flat surface with adequate ventilation. Ensure no vents are obstructed.
- توصيل الطاقة: Connect the power cable to the G-RAID Shuttle 8 and then to a grounded electrical outlet.
- الاتصال بجهاز الكمبيوتر المضيف: Use the provided Thunderbolt 3 cable to connect the G-RAID Shuttle 8 to your computer's Thunderbolt 3 port. Alternatively, use a USB-C cable for USB-C connections.
- تشغيل الطاقة: Press the power button on the rear of the unit to turn it on.
- الترتيب الأولي: The device is pre-configured in RAID 5. For other RAID configurations (RAID 0, 1, 6, 10, 50, 60, or JBOD), refer to the SanDisk Professional G-RAID Shuttle 8 software utility for detailed instructions. This utility allows you to manage and monitor your RAID array.
4. تعليمات التشغيل
Once set up, the G-RAID Shuttle 8 operates as a high-capacity external storage device. Your operating system should recognize it as a mounted volume.
- نقل البيانات: السحب والإفلات files to and from the mounted volume as you would with any other external drive. The Thunderbolt 3 connection ensures high-speed transfers.
- RAID Management: Use the dedicated SanDisk Professional G-RAID Shuttle 8 software utility to monitor drive health, change RAID configurations, and manage advanced settings. Changing RAID levels will erase all data on the drives, so ensure data backup before proceeding.
- ديزي تسلسل: Utilize the dual Thunderbolt 3 ports to connect up to five additional Thunderbolt devices, expanding your workstation's capabilities.
- توصيل الطاقة عبر USB: The USB-C port can deliver up to 85W of power, allowing you to charge compatible laptops (e.g., MacBooks) directly from the G-RAID Shuttle 8.
5. الصيانة
Proper maintenance ensures the longevity and reliability of your G-RAID Shuttle 8.
- المراقبة المنتظمة: Periodically check the status of your drives and RAID array using the SanDisk Professional software utility. Pay attention to any alerts or warnings.
- استبدال القرص الصلب: In the event of a drive failure (especially in RAID 5 or RAID 6 configurations), replace the faulty drive promptly with a compatible Ultrastar enterprise-class hard drive. Refer to the software utility for safe drive replacement procedures.
- تنظيف: Keep the unit clean and free of dust. Use a soft, dry cloth to wipe the exterior. Ensure ventilation openings are clear.
- تحديثات البرامج الثابتة: Check the SanDisk Professional support webيمكنك الاطلاع على الموقع الإلكتروني للحصول على أي تحديثات متاحة للبرامج الثابتة لجهازك. يمكن للتحديثات تحسين الأداء والاستقرار.
6. استكشاف الأخطاء وإصلاحها
If you encounter issues with your G-RAID Shuttle 8, consider the following common solutions:
| مشكلة | الحل المحتمل |
|---|---|
| الجهاز غير معترف به من قبل الكمبيوتر | Ensure power cable is securely connected and the unit is powered on. Verify Thunderbolt 3 or USB-C cable connection. Try a different port or cable. Restart your computer. |
| سرعات نقل البيانات البطيئة | Confirm you are using a Thunderbolt 3 connection for optimal speeds. Check for background processes consuming bandwidth. Ensure drives are healthy via the software utility. |
| Drive failure indication | Identify the failed drive using the software utility. Replace the drive as soon as possible to maintain data redundancy (if configured in RAID 5/6). |
| الوحدة لا تعمل | Check power cable connections and the power outlet. Ensure the power button is fully pressed. |
For further assistance, refer to the official SanDisk Professional support resources or contact customer support.
7. المواصفات
- سعة التخزين الرقمية: 160 تيرابايت
- واجهة القرص الصلب: يو اس بي-سي
- تقنية الاتصال: Thunderbolt 3, USB-C
- رقم موديل المنتج: مكوك G-RAID 8
- وزن السلعة: 32 رطل
- أبعاد المنتج: 14 × 13 × 21 بوصة (طول × عرض × ارتفاع)
- لون: أسود
- عامل شكل القرص الصلب: 3.5 بوصة
- وصف القرص الصلب: غارة
- الأجهزة المتوافقة: سطح المكتب
- نوع التثبيت: القرص الصلب الخارجي
8. الضمان والدعم
The SanDisk Professional G-RAID Shuttle 8-Bay RAID Array is backed by a ضمان محدود لمدة سنة واحدة. For detailed warranty terms and conditions, please visit the official SanDisk Professional webموقع.
For technical support, driver downloads, firmware updates, and additional resources, please visit the SanDisk Professional Support Page.