1. انتهى المنتجview
The Wuloo S600-P2 is an upgraded hands-free wireless intercom system designed for clear, two-way audio communication within homes or businesses. This full-duplex system allows for simultaneous speaking and listening, similar to a phone call. It features a long signal range of up to 1 mile (5280 feet), enhanced voice quality, and low power consumption. The system is expandable, supporting up to 10 units, and incorporates new technology for strong anti-interference capabilities, ensuring private conversations.
Image: The Wuloo S600-P2 wireless intercom unit, showcasing its compact design and antenna.
Image: Diagram highlighting the new upgraded features: simpler operation, better voice quality, longer signal range, and lower power consumption.
Image: An elderly woman and a child interacting with the intercom units, demonstrating ease of use for all ages.
2. تعليمات الإعداد
2.1 محتويات العبوة
قبل البدء، تأكد من تواجد جميع المكونات:
- Wuloo Hands-Free Wireless Intercom System: 2 units
- Power cable for Wuloo intercom system: 2 units
- Power supply (Input AC100-240V; output DC5V): 2 units
- Detailed Manual for Wuloo 2-way intercom system: 1 unit
- Quick start guide for full duplex intercom: 1 unit
Image: The complete package contents, including two intercom units, power cables, adapters, and manuals.
2.2 Powering On and Initial Code Setting
Follow these steps to power on your intercom units and set their unique codes:
- الاتصال بالطاقة المترددة: Plug each intercom unit into a standard AC outlet using the provided power cables and adapters.
- Set Code Number: With the unit connected to power, press and hold the desired code number button (1-10) for a few seconds until you hear a confirmation tone. Each unit should have a unique code for individual communication.
- Distribute Units: Place each coded unit in its intended location. For example, Code 1 in the living room, Code 2 in the bedroom.
Image: Visual guide demonstrating how to connect the intercom to AC power and set the code number for each unit.
Video: A demonstration of how to set up the Wuloo S600 hands-free 2-way intercom system, including power connection and initial configuration.
3. تشغيل نظام الاتصال الداخلي الخاص بك
3.1 Basic Communication (Individual Call)
To initiate a call to a specific unit:
- Ensure the intercom is powered on.
- اضغط على شفرة number button (1-10) corresponding to the unit you wish to call.
- اضغط على CALL/OK button. The receiving unit will ring.
- Once the call is connected, you can speak hands-free. Maintain a distance of 20-30cm from the microphone for optimal clarity.
Video: A short clip demonstrating the hands-free chatting feature of the Wuloo S600 intercom system.
3.2 وظيفة استدعاء المجموعة
To broadcast a message to all connected units:
- اضغط مع الاستمرار على مجموعة زر.
- Speak your message. All intercom units on the same channel will receive the broadcast simultaneously.
Video: A demonstration of the group call function for the Wuloo S600 intercom system, showing how to communicate with multiple units at once.
3.3 وظيفة الشاشة
The MONITOR function allows one unit to listen in on another room without a time limit. This is useful for monitoring children or elderly individuals.
- للتنشيط ، اضغط على MONITOR button on the unit you wish to listen from.
- The monitored unit will transmit audio to the monitoring unit.
3.4 Volume and Chime Settings
Adjusting call volume and chime settings:
- حجم المكالمة: When the intercom is ON, press المجلد +/- to adjust the call volume.
- Chime Setting: اضغط مع الاستمرار المجلد+ for 3 seconds to enter chime setting mode. Use المجلد +/- to select from 10 available chimes, then press CALL/OK للتأكيد.
- حجم الرنين: اضغط مع الاستمرار المجلد- for 3 seconds to enter chime volume setting mode. Use المجلد +/- to adjust the chime volume, then press CALL/OK للتأكيد.
Image: A detailed diagram of the intercom unit's buttons and their functions, including VOL+/-, GROUP, MONITOR, and CALL/OK.
4. الرعاية والصيانة
To ensure the longevity and optimal performance of your Wuloo S600-P2 intercom system, follow these simple care guidelines:
- تنظيف: Wipe the units with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the surface or internal components.
- الموقع: Place units on a stable, flat surface or mount them securely on a wall using the integrated wall mounts. Avoid placing units near heat sources, direct sunlight, or in areas with excessive moisture.
- مزود الطاقة: استخدم دائمًا محولات الطاقة الأصلية المرفقة مع النظام.
- بيئة: This intercom system is designed for indoor use and is not water-resistant. Avoid exposure to rain, splashes, or high humidity.
5. دليل استكشاف الأخطاء وإصلاحها
5.1 Interference and Unfamiliar Calls
If you experience interference or hear conversations from other intercom systems, it may be due to using a public frequency. The factory default channel is 1. To avoid this:
- قناة التغيير: In the OFF status, press and hold the power button and CALL/OK button simultaneously to enter Channel setting mode. Use المجلد +/- to select a different channel (1-10), then press CALL/OK to confirm. Ensure all your intercom units are set to the same new channel.
Video: Explanation of the anti-interference feature of the Wuloo S600 intercom system and how to change channels to avoid unwanted conversations.
5.2 No Power / Unit Not Responding
- تحقق من اتصال الطاقة: Ensure the power cable is securely plugged into both the intercom unit and a working AC outlet.
- زر الطاقة: Press and hold the power button to turn the unit ON. If the unit is OFF, pressing and holding the power button and CALL/OK button at the same time will restore factory settings (Code 1, middle volume).
- توافق بنك الطاقة: The intercom can work with a DC 5V 1A power bank (not included) for portability, but it does not operate on internal batteries.
فيديو: مقدمة قصيرةview demonstrating how the Wuloo intercom system can be powered by a DC 5V 1A power bank for portable use, as it does not use internal batteries.
5.3 جودة الصوت رديئة / مستوى الصوت منخفض
- ضبط مستوى الصوت: استخدم المجلد +/- buttons to increase the call volume.
- مسافة الميكروفون: Ensure you are speaking within 20-30cm of the microphone for clear audio transmission.
- العوائق: Check for any physical obstructions between the intercom units that might be affecting signal strength.
6. المواصفات الفنية
| ماركة | وولو |
| رقم الموديل | إس 600-بي 2 |
| لون | 2 units set |
| عدد القنوات | 10 |
| ميزة خاصة | Long range hands-free talking like a phone |
| نطاق التردد | 450-470 ميجا هرتز |
| الحد الأقصى لمدى التحدث | 1 mile (5280 feet) |
| المجلدtage | 5 فولت |
| مستوى مقاومة الماء | Not Water Resistant (Indoor Use) |
| بروتوكول الاتصال | تقنية لاسلكية خاصة |
| نوع الموالف | ترددات فائقة التردد |
| عدد الوحدات | 2 عدد |
7. الضمان ودعم العملاء
7.1 معلومات الضمان
The Wuloo S600-P2 intercom system comes with a ضمان لمدة 2 سنوات from the date of purchase. This warranty covers manufacturing defects and ensures lifetime service for your product.
7.2 دعم العملاء
For any questions, technical assistance, or warranty claims, please contact Wuloo customer support:
- بريد إلكتروني: support@wulooofficial.com
- Webموقع: www.wulooofficial.com
Wuloo is dedicated to providing excellent customer service and support for all its products.
