TJOY 100 ft RGB LED Strip Lights with 44-Key Remote Control User Manual

مقدمة

Thank you for choosing the TJOY 100 ft RGB LED Strip Lights. This product is designed to provide vibrant, customizable lighting for indoor spaces, enhancing the ambiance of bedrooms, living rooms, kitchens, and more. This manual provides essential information for safe installation, operation, and maintenance of your LED strip lights.

Image: TJOY LED strip lights illuminating a modern kitchen with purple and blue light, creating a vibrant atmosphere.

معلومات السلامة

• تم تصميم هذا المنتج لـ للاستخدام الداخلي فقطلا تعرضها للماء أو الرطوبة العالية.
• تأكد من أن سطح التركيب نظيف وجاف وأملس لضمان الالتصاق السليم.
• Operate the lights using the provided 24V power adapter. Using an incorrect power supply may damage the product or pose a safety risk.
• Avoid short circuits by keeping metal objects and liquids away from exposed electrical components.
• Do not cover the LED strips with materials that could impede heat dissipation.
• يحفظ بعيدًا عن متناول الأطفال.
• If any damage occurs to the strip lights or power adapter, discontinue use immediately and contact customer support.

محتويات الحزمة

تأكد من وجود جميع العناصر في الحزمة الخاصة بك:

• 2 x 50 ft RGB LED Strip Lights (Total 100 ft)
• جهاز تحكم عن بعد بالأشعة تحت الحمراء مكون من 44 مفتاحًا
• 1 × جهاز استقبال الأشعة تحت الحمراء
• 1 × محول الطاقة 24V
• 1 × دليل المستخدم

الإعداد والتثبيت

1. اختبار الأضواء: Before installation, connect all components (LED strips, IR receiver, power adapter) and power on the lights to ensure they function correctly.
2. تحضير السطح: Clean the desired installation surface thoroughly. Ensure it is dry, smooth, and free of dust or debris. The adhesive works best on glass and ceramic tile. Avoid frosted glass or dusty walls.

   Image: Diagram illustrating suitable surfaces (glass, ceramic tile) and unsuitable surfaces (frosted glass, dusty wall) for LED strip light installation.
3. Apply the Strip Lights: Peel off the backing from the self-adhesive tape on the back of the LED strip. Carefully press the strip onto the prepared surface, ensuring it adheres firmly. Press repeatedly along the strip to secure it.
4. ربط المكونات:
   • Connect the LED strip(s) to the IR receiver. Ensure the arrows on the connectors align with the "+12V" markings.
   • قم بتوصيل جهاز استقبال الأشعة تحت الحمراء بمحول الطاقة.
   • قم بتوصيل محول الطاقة بمأخذ كهربائي قياسي.
   

   Image: Diagram illustrating the correct connection sequence for the LED strip lights, IR receiver, and power adapter, highlighting arrow alignment.

5. القطع والربط: The LED strips can be cut along designated cutting marks to adjust their length. If you need to link cut sections, specific 4-pin connectors (not included) are required.

تعليمات التشغيل

Using the 44-Key IR Remote Control

The included 44-key IR remote control allows you to manage various functions of your LED strip lights. Ensure you point the remote directly at the IR receiver for optimal response.

Image: Detailed diagram of the 44-key IR remote control, showing buttons for brightness, color selection, DIY functions, and dynamic modes.

• تشغيل/إيقاف التشغيل: Use the red power button to turn the lights on or off.
• ضبط السطوع: استخدم زيادة السطوع و خفض السطوع buttons to adjust the light intensity (8 levels available).
• اختيار اللون: Choose from 20 preset colors using the color grid buttons.
• خيارات الألوان DIY: The 6 DIY buttons allow you to create and save custom colors. Press a DIY button, then use the R/G/B increase/decrease buttons to mix your desired color. Press the same DIY button again to save.
• الأوضاع الديناميكية:
  • Quick/Slow: اضبط سرعة الأوضاع الديناميكية.
  • آلي: Cycles through all dynamic modes.
  • فلاش: Flashing mode.
  • Fade 3/7: Gradual color change modes.
  • Jump 3/7: Instant color change modes.

مهم: For the remote control to function, point it directly at the IR receiver, not at the LED strip itself.

Image: Illustration demonstrating the correct method of pointing the remote control towards the IR receiver (green checkmark) versus pointing it at the LED strip (red X).

فيديو المنتج

فيديو: عرض توضيحي قصيرasing the TJOY LED Strip Lights changing colors and illuminating a room, highlighting their ambient effect.

صيانة

• تنظيف: امسح شرائط LED برفق بقطعة قماش جافة وناعمة لإزالة الغبار. لا تستخدم المنظفات السائلة.
• تخزين: If storing the lights for an extended period, ensure they are clean, dry, and coiled loosely to prevent damage.
• التصاق: If the adhesive weakens over time, additional mounting clips or double-sided tape may be used (not included).

استكشاف الأخطاء وإصلاحها

تحديد

الضمان والدعم

TJOY is committed to providing high-quality products and customer satisfaction. If you encounter any questions or issues during the installation or operation of your LED strip lights, please contact our customer service team. We aim to resolve all inquiries within 24 hours.

For support, please refer to the contact information provided with your purchase or visit the official TJOY webموقع.