Fila Unisex Digital Watch - Model 38-191-104 Instruction Manual

مقدمة

Thank you for choosing the Fila Unisex Digital Watch, Model 38-191-104. This manual provides essential information for the proper setup, operation, and maintenance of your watch. Please read it carefully to ensure optimal performance and longevity of your device.

المنتج انتهىview

The Fila Model 38-191-104 is a digital wrist watch designed for unisex use, featuring a style inspired by 1970s fashion. It combines a retro aesthetic with modern digital timekeeping and an alarm function.

Image: Fila Unisex Digital Watch, Model 38-191-104, showcasing its digital display and pink silicone strap.

يثبت

تركيب البطارية

Your Fila digital watch comes with one Lithium Ion battery pre-installed. No immediate battery installation is required for initial use.

إعداد الوقت الأولي

1. تحديد الأزرار: Locate the control buttons on the side of your watch. Typically, there are buttons for 'Mode', 'Set', 'Adjust', and 'Light'. Refer to the watch's physical markings if available.
2. أدخل وضع ضبط الوقت: Press the 'Mode' button repeatedly until the time display starts flashing or indicates a setting mode.
3. ضبط الوقت: Use the 'Adjust' or 'Set' button to change the hour, minute, and other time parameters. The 'Mode' button usually cycles through the different settings (hours, minutes, 12/24-hour format).
4. تأكيد الإعدادات: Once the time is set, press the 'Mode' button or a dedicated 'Confirm' button to exit the setting mode.

Note: Specific button functions may vary slightly. If you encounter difficulties, refer to the general operating instructions below.

تعليمات التشغيل

الوظائف الأساسية

• عرض الوقت: The watch primarily displays time in digital format.
• عرض التاريخ: Press the 'Mode' button once from the time display to view التاريخ.
• الإضاءة الخلفية: Press the 'Light' button (if available) to illuminate the display in low-light conditions.

ضبط المنبه

Your watch includes an alarm feature.

1. وضع إنذار الوصول: Press the 'Mode' button until "AL" or "Alarm" appears on the display.
2. ضبط وقت التنبيه: Use the 'Set' or 'Adjust' button to set the desired alarm hour and minute.
3. تنشيط / إلغاء تنشيط المنبه: In alarm mode, use a specific button (often 'Adjust' or 'Start/Stop') to toggle the alarm ON or OFF. An alarm icon will typically appear when activated.
4. وضع إنذار الخروج: Press the 'Mode' button to return to the normal time display.

صيانة

تنظيف

لتنظيف ساعتك، امسحها برفق بقطعة قماش ناعمة وجافة. أما بالنسبة لحزام السيليكون،amp cloth with mild soap can be used, followed by drying thoroughly. Avoid harsh chemicals or abrasive materials.

مقاومة الماء

This watch is water-resistant up to 10 meters. This means it can withstand splashes or brief immersion in water, such as during hand washing or light rain. It is لا suitable for swimming, showering, or diving. Do not operate buttons while the watch is wet.

استبدال البطارية

When the display dims or functions become erratic, the battery may need replacement. Battery replacement should ideally be performed by a qualified watch technician to ensure proper sealing and water resistance. The watch requires one Lithium Ion battery.

استكشاف الأخطاء وإصلاحها

• الساعة لا تعرض الوقت: Check if the battery is depleted. If the watch is new, ensure any protective plastic tabs have been removed.
• الوقت غير صحيح: Follow the "Initial Time Setting" instructions to reset the time.
• إنذار لا يصدر صوتا: Ensure the alarm function is activated (look for an alarm icon on the display). Check the alarm time setting.
• الشاشة خافتة: This usually indicates a low battery. Consider professional battery replacement.

تحديد

الضمان والدعم

معلومات الضمان

This Fila watch comes with a ضمان محدود لمدة 6 شهرًا يسري هذا الضمان من تاريخ الشراء. ويغطي عيوب التصنيع في ظل الاستخدام العادي. ولا يغطي الأضرار الناتجة عن الحوادث أو سوء الاستخدام أو الإصلاحات غير المصرح بها أو التلف الناتج عن الاستخدام العادي.

دعم العملاء

For warranty claims, technical assistance, or any questions regarding your Fila watch, please contact the retailer or the official Fila customer service in your region. Please have your purchase receipt and watch model number (38-191-104) available when contacting support.