Saooer CM3024Z

Saooer Solar Charge Controller 40A 12V/24V

دليل المستخدم

Model: CM3024Z

1. المقدمة

Thank you for choosing the Saooer Solar Charge Controller 40A 12V/24V. This intelligent regulator is designed to manage the power flow from your solar panels to your battery bank, ensuring efficient charging and protecting your battery from overcharge and over-discharge. This manual provides essential information for the safe and effective installation, operation, and maintenance of your solar charge controller.

2. معلومات السلامة

Please read all instructions carefully before installation and operation.

  • تأكد من صحة جميع التوصيلات وتأمينها قبل تشغيل الطاقة.
  • لا تحاول تفكيك وحدة التحكم أو إصلاحها بنفسك. اتصل بفنيين مؤهلين للصيانة.
  • قم بتثبيت وحدة التحكم في منطقة جيدة التهوية، بعيدًا عن المواد القابلة للاشتعال وأشعة الشمس المباشرة.
  • قم دائمًا بتوصيل البطارية أولًا، ثم اللوحة الشمسية، وأخيرًا الشحنة. افصلها بالترتيب العكسي.
  • The controller is equipped with multiple protection functions including short-circuit protection, open-circuit protection, and reverse polarity protection. However, incorrect wiring can still cause damage.
  • استخدم مقاسات الأسلاك المناسبة لجميع التوصيلات لمنع ارتفاع درجة الحرارة.

3. انتهى المنتجview

The Saooer Solar Charge Controller (Model CM3024Z) is a compact and efficient device featuring an LCD display for easy monitoring and control. It automatically identifies 12V or 24V system voltagإِسْ

أمام view of the Saooer Solar Charge Controller with its LCD display showing charge status and parameters.
أمام view of the controller with the LCD display active, showing charge status and various parameters.
بزاوية view of the Saooer Solar Charge Controller, highlighting the buttons and terminal connections.
بزاوية view of the controller, providing a better look at the control buttons and connection terminals.
Image showing the dimensions of the Saooer Solar Charge Controller: 180mm width and 90mm height.
Dimensions of the controller, indicating a width of 180mm and a height of 90mm.

المميزات الرئيسية:

  • Automatic identification of 12V/24V system voltage.
  • Built-in industrial master chip for precise charge and discharge control.
  • Adjustable parameters for customized battery management.
  • Comprehensive 3-stage إدارة الشحن PWM.
  • Multiple protection functions: short-circuit, open-circuit, reverse polarity, over-current, overcharge.
  • LCD screen with backlight for clear status and data display.
  • Double MOS anti-backflow circuit for ultra-low heat generation.

4. الإعداد والتثبيت

اتبع هذه الخطوات لتثبيت جهاز التحكم في شحن الطاقة الشمسية بشكل صحيح:

  1. التحضير للتثبيت: Choose a suitable mounting location that is dry, well-ventilated, and protected from direct sunlight and moisture. Ensure there is enough space around the controller for air circulation.
  2. قم بتوصيل البطارية: Connect the battery to the controller's battery terminals (marked with '+' and '-'). Ensure correct polarity. The controller will automatically detect the system voltagهـ (12 فولت أو 24 فولت).
  3. ربط اللوحة الشمسية: Connect the solar panel to the controller's solar panel terminals (marked with 'PV+' and 'PV-'). Ensure correct polarity.
  4. توصيل الحمل (اختياري): Connect your DC load to the controller's load terminals (marked with 'Load+' and 'Load-'). Ensure correct polarity. This allows the controller to manage load discharge and provide low-voltage disconnect protection.
  5. التحقق من الاتصالات: Double-check all connections for tightness and correct polarity before powering on the system.

مهم: Always connect the battery first, then the solar panel, and finally the load. Disconnect in the reverse order (load, then solar panel, then battery).

5. تعليمات التشغيل

The LCD display provides real-time information about your solar system. Use the buttons below the display to navigate and adjust settings.

معلومات شاشة LCD:

The LCD screen shows various parameters such as battery voltage, charging current, discharge current, accumulated charging amount, and load status. The backlight function improves visibility in low-light conditions.

وظائف الأزرار:

  • زر القائمة: Press to cycle through different display screens and enter parameter setting mode.
  • Up/Increase Button: Used to increase values when in parameter setting mode.
  • Down/Decrease Button: Used to decrease values when in parameter setting mode.

Refer to the on-screen prompts and the specific icons on the display for detailed interpretation of data and settings.

6. الصيانة

تضمن الصيانة الدورية طول عمر جهاز التحكم في شحن الطاقة الشمسية وأدائه الأمثل.

  • تنظيف: Periodically clean the controller's exterior with a dry cloth to remove dust and dirt. Do not use liquid cleaners.
  • فحص الاتصال: Annually inspect all wiring connections to ensure they are tight and free from corrosion. Loose connections can lead to power loss or overheating.
  • تهوية: Ensure that the installation area remains well-ventilated and free from obstructions that could block airflow to the controller's heat sinks.
  • الظروف البيئية: Verify that the controller is not exposed to extreme temperatures, humidity, or direct water contact.

7. استكشاف الأخطاء وإصلاحها

If you encounter issues with your Saooer Solar Charge Controller, refer to the following common problems and solutions:

مشكلةالسبب المحتملحل
Controller not turning on / LCD blankلا توجد بطارية متصلة أو مستوى شحن البطاريةtagالجهد الكهربائي منخفض جدًا. توصيل عكسي القطبية.Ensure battery is connected first and has sufficient charge. Check battery polarity.
البطارية لا تشحنSolar panel not connected or insufficient sunlight. Reverse polarity of solar panel. Faulty solar panel.تأكد من توصيلات الألواح الشمسية وقطبيتها. تأكد من وجود ضوء شمس كافٍ. اختبر إنتاجية الألواح الشمسية.
التحميل لا يعملLoad not connected. Battery voltage too low (low voltage disconnect). Overload protection activated.Check load connections. Charge battery. Reduce load or check for short circuit in load.
تحكم في ارتفاع درجة الحرارةPoor ventilation. Overload.Ensure proper airflow around the controller. Reduce load if consistently overloaded.

إذا استمرت المشكلة بعد محاولة هذه الحلول، فيرجى الاتصال بدعم العملاء.

8. المواصفات

المعلمةقيمة
نموذجCM3024Z
حجم النظامtageالتعرف التلقائي 12 فولت / 24 فولت
الحد الأقصى لتيار الشحن40 أمبير
نوع العرضشاشة الكريستال السائل
لونأسود
أبعاد الحزمة8.19 × 4.29 × 2.52 بوصة
وزن العنصر12.6 أونصات
الشركة المصنعةSaooer
ASINB09NLWNLBX

9. الضمان والدعم

For warranty information and customer support, please refer to the documentation provided with your purchase or contact the seller directly. Keep your purchase receipt as proof of purchase.

للاستفسارات العامة أو للحصول على المساعدة التقنية، يمكنك زيارة الموقع الإلكتروني التالي: Saooer Store on Amazon.

© 2023 Saooer. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.