دليل مستخدم سكوتر كهربائي نيون من OKAI

1. المقدمة

Welcome to the OKAI Neon Electric Scooter user manual. This guide provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new electric scooter. Please read this manual thoroughly before your first ride to ensure optimal performance and safety.

Figure 1: The OKAI Neon Electric Scooter, showcasing its sleek white design and integrated lighting.

2. معلومات السلامة

Riding an electric scooter carries inherent risks. To minimize these risks, always adhere to the following safety guidelines:

• ارتدِ دائمًا خوذة ومعدات أمان مناسبة (وسادات الركبة، ووسادات الكوع) عند ركوب الدراجة.
• تأكد من تثبيت جميع المكونات بشكل آمن قبل كل رحلة.
• لا تركب الدراجة في ظروف رطبة، أو تحت أمطار غزيرة، أو عبر البرك المائية.
• التزم بقوانين وأنظمة المرور المحلية.
• حافظ على سرعة ومسافة آمنة من المركبات الأخرى والمشاة.
• تجنب الركوب تحت تأثير الكحول أو المخدرات.
• The maximum weight limit for this scooter is 220 pounds (100 kg). Do not exceed this limit.
• هذا السكوتر مصمم للاستخدام من قبل البالغين.

3. محتويات العبوة

تأكد من أن جميع العناصر موجودة وفي حالة جيدة عند فتح الصندوق:

• OKAI Neon Electric Scooter
• محول الشحن
• دليل المستخدم (هذا المستند)
• أدوات التجميع (إذا لزم الأمر)
• بطاقة مفتاح NFC

4. الإعداد والشحن الأولي

4.1 فك الصندوق والتجميع

Carefully remove the scooter and all accessories from the packaging. The OKAI Neon Electric Scooter typically comes pre-assembled with minimal setup required. Follow these steps:

1. Lift the handlebar stem until it clicks into place. Ensure the folding mechanism is securely locked.
2. Attach the handlebars to the stem, ensuring all cables are properly connected and not pinched. Tighten any screws as instructed in the quick start guide (if provided separately).

4.2 الشحن الأولي

Before your first ride, fully charge the scooter's battery. This helps prolong battery life.

• حدد موقع منفذ الشحن على السكوتر.
• Connect the charging adapter to the scooter's charging port, then plug the adapter into a standard wall outlet.
• The scooter's display will indicate charging status. A full charge typically takes approximately 5.5 hours.
• بمجرد شحنه بالكامل، افصل الشاحن.

5. تعليمات التشغيل

5.1 تشغيل/إيقاف التشغيل

• To power on: Press and hold the power button on the handlebar until the display illuminates.
• To power off: Press and hold the power button until the display turns off.

5.2 أساسيات ركوب الخيل

To begin riding, place one foot on the deck and push off with the other foot to gain some initial momentum. Once moving, gently press the accelerator lever to engage the motor. For braking, use the hand levers for the electric brake (front) and disc brake (rear).

Figure 2: Key features including the smart display, disc brake, 300W power motor, and hidden rear suspension.

5.3 أوضاع للسرعة

The OKAI Neon Electric Scooter features multiple speed modes to suit different riding conditions and rider preferences. Refer to the scooter's display or the OKAI app to switch between modes. The maximum speed is approximately 15.5 MPH (25 km/h).

5.4 آلية الطي

The scooter features a one-click folding design for easy storage and transport. To fold, locate the folding latch near the base of the handlebar stem, release it, and carefully fold the stem down until it locks into place with the rear fender.

5.5 App Connectivity and Customization

Enhance your riding experience by connecting your OKAI Neon Electric Scooter to the OKAI app. The app allows for:

• Adjusting ambient light settings.
• Monitoring real-time ride updates and battery status.
• Customizing dashboard settings.
• Locking/unlocking the scooter (using the NFC key card or app).

Download the official OKAI app from your device's app store and follow the in-app instructions to pair your scooter.

6. الصيانة

Regular maintenance ensures the longevity and safe operation of your OKAI Neon Electric Scooter.

6.1 العناية بالبطارية

• اشحن البطارية بالكامل قبل الاستخدام لأول مرة.
• Avoid completely draining the battery. Recharge after each use, or at least once a month if not used regularly.
• قم بتخزين السكوتر في مكان بارد وجاف، بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى.
• Use only the official OKAI charging adapter.

6.2 ضغط الإطارات

The front tire is pneumatic, and maintaining correct tire pressure is crucial for ride comfort, range, and safety. Check tire pressure regularly. While specific recommended PSI is not provided in this manual, generally, electric scooters require tire pressure between 30-50 PSI. Consult a professional if unsure or if you experience frequent deflation.

6.3 التنظيف والتخزين

• تنظيف السكوتر مع الإعلانamp قطعة قماش. لا تستخدم نفاثات المياه ذات الضغط العالي أو المنظفات المسببة للتآكل.
• تأكد من إغلاق غطاء منفذ الشحن بشكل آمن قبل التنظيف.
• قم بتخزين السكوتر في مكان داخلي جاف عندما لا يكون قيد الاستخدام.

6.4 فحص الفرامل

Regularly inspect the front electric brake and rear disc brake for proper function. Ensure brake levers are responsive and brake pads are not excessively worn. Adjust or replace components as needed, or seek professional assistance.

7. استكشاف الأخطاء وإصلاحها

This section addresses common issues you might encounter with your OKAI Neon Electric Scooter.

If you encounter an issue not listed here or if the suggested solutions do not resolve the problem, please contact OKAI customer support.

8. المواصفات

Figure 3: Dimensions of the OKAI Neon Electric Scooter.

9. الضمان ودعم العملاء

9.1 معلومات الضمان

The OKAI Neon Electric Scooter comes with a 1 Year Limited Warranty. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, refer to the official OKAI webالموقع أو الاتصال بدعم العملاء.

9.2 دعم العملاء

For technical assistance, warranty claims, or any other inquiries, please contact OKAI customer support. You can find contact information on the official OKAI website or through the OKAI app. OKAI offers 100% local customer support.

Visit the official OKAI Store on Amazon: OKAI Store