1. المقدمة
The Easythreed K1 Mini 3D Printer is an entry-level 3D printer designed for beginners, including children and teens. It offers a compact design, ease of use, and reliable performance for creating three-dimensional models. This manual provides essential information for setting up, operating, and maintaining your 3D printer.
Figure 1.1: The Easythreed K1 Mini 3D Printer, showcasing its compact design and a printed vase on the build plate.
2. ماذا يوجد في الصندوق
Upon unboxing your Easythreed K1 Mini 3D Printer, please ensure all the following components are present:
- Easythreed K1 Mini 3D Printer Unit
- محول الطاقة
- دليل المستخدم (هذا المستند)
- Test PLA Filament (small quantity)
- TF Card (includes assembly video, sample files, and software)
3. الإعداد والتجميع
The Easythreed K1 Mini 3D Printer is designed for quick and easy assembly, typically taking around 5 minutes. It consists of three main parts that need to be connected.
3.1 التجميع الأولي
- قم بإزالة كافة مواد التغليف بعناية.
- Connect the main components as indicated in the assembly video provided on the TF card.
- تأكد من أن جميع الاتصالات آمنة قبل المتابعة.
3.2 تحميل الشعيرة
The printer uses 1.75mm PLA or TPU filament. To load filament:
- Place the filament spool onto the designated holder.
- Gently feed the filament into the extruder's input hole until it catches.
- Use the 'Feed' button on the printer's control panel to automatically draw the filament into the nozzle. Wait until molten filament extrudes from the nozzle, indicating it's ready.
Figure 3.1: Key features including Dual Z Axis Design, Upgraded Extruder, Removable Magnetic Plate, and Easy Operating buttons.
4. تعليمات التشغيل
Operating the Easythreed K1 is straightforward with its intuitive controls.
4.1 Bed Leveling (Crucial Step)
Proper bed leveling is the most critical step for successful prints.
- Press the 'Home' button on the control panel. The print head will automatically move to its home (zero) position.
- Once the nozzle touches the magnetic plate, immediately disconnect the power. This prevents the nozzle from pressing too hard.
- Adjust the distance between the nozzle and the magnetic plate at four points (A, B, C, D) on the build platform. The correct distance should be approximately the thickness of a single piece of paper.
- If the nozzle is too close, it can damage the magnetic plate. If it's too far, the print will not adhere.
Figure 4.1: Visual guide for the bed leveling process, showing correct and incorrect nozzle distances.
4.2 Printing Your First Model
- Ensure the TF card with your desired model file is inserted into the printer's TF card slot. The printer will print the latest model file if multiple are present.
- Press the 'Start Printing' button. The printer will begin heating the nozzle and then commence printing.
- Monitor the initial layers to ensure proper adhesion to the build plate.
- Once printing is complete, wait for the print to cool down before carefully removing it from the removable magnetic plate. The flexible plate makes removal easy.
الشكل 4.2: مثالamples of various models that can be printed with the Easythreed K1 Mini 3D Printer.
4.3 Software and Slicing
The printer comes with its own design and slicing software on the supplied TF card. For more advanced users, Ultimaker Cura is recommended, and a profile file for import is provided.
الشكل 4.3: انتهىview of modeling software for advanced users, slicing software for intermediate users, and massive printable models for beginners.
5. الصيانة
تضمن الصيانة الدورية طول عمر طابعة ثلاثية الأبعاد وأدائها الأمثل.
- تنظيف الفوهة: Periodically clean any filament residue from the nozzle using a soft brush or cloth.
- تنظيف لوحة الطباعة: After each print, ensure the magnetic build plate is clean and free of debris.
- تشديد البراغي: Due to vibrations during printing, screws may loosen over time. Periodically check and tighten all screws, especially on the frame and moving parts.
- Store Filament Properly: Store filament in a dry, cool place to prevent moisture absorption, which can affect print quality.
6. استكشاف الأخطاء وإصلاحها
فيما يلي بعض المشكلات الشائعة وحلولها:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الطباعة لا تلتصق بالسرير | Improper bed leveling, dirty build plate, incorrect print settings (e.g., first layer height) | Re-level the bed carefully (refer to Section 4.1), clean the build plate, adjust first layer settings in slicing software. |
| No filament extrusion | Nozzle clogged, filament tangled, incorrect temperature | Clear nozzle clog, untangle filament, ensure correct printing temperature for PLA (typically 180-210°C). |
| Poor print quality (layers separating, rough surface) | Incorrect temperature, print speed too high, filament quality, loose components | Adjust temperature, reduce print speed, try new filament, check and tighten screws. |
| Printer making unusual noises | Loose screws, worn bearings, fan issues | Check and tighten all screws, inspect moving parts for obstruction or wear. |
7. المواصفات
Detailed technical specifications for the Easythreed K1 Mini 3D Printer:
- أبعاد المنتج: 25 سم عمق × 26.5 سم عرض × 28 سم ارتفاع
- وزن السلعة: 1.4 كيلوغرام
- Building Size (Print Volume): 100 × 100 × 100 مم (4 بوصة × 4 بوصة × 4 بوصة)
- توافق الشعيرة: 1.75 مم PLA، TPU
- دقة الطباعة: 0.1 ملم
- قطر الفوهة: 0.4 ملم
- Extruder Heating Time: Reaches 180°C in 3 minutes
- لوحة البناء: Removable Magnetic Plate
- استهلاك الطاقة (وضع التشغيل): 30 واط
- لون: أحمر، أسود
Figure 7.1: Dimensions of the Easythreed K1 Mini 3D Printer.
8. الضمان والدعم
Easythreed is committed to providing excellent pre-sales and after-sales service. If you encounter any quality problems with the product, including damage to parts during use, or damage due to transportation, we will replace the affected parts or the entire product free of charge.
Should you experience difficulties with leveling or achieving successful prints, please do not hesitate to contact our support team. We are dedicated to resolving your issues as quickly as possible.
For support, please refer to the contact information provided on the Easythreed official webالموقع أو الوثائق المضمنة مع منتجك.