ليدفانس 65636
Sylvania 32ft RGB Flexible Light Strip Starter Kit Instruction Manual
الموديل: 65636 | العلامة التجارية: LEDVANCE
معلومات هامة حول السلامة
- للاستخدام الداخلي فقط: This product is designed for indoor use in dry locations. Do not expose to water or high humidity.
- السلامة الكهربائية: Ensure the power adapter is connected to a suitable power outlet. Do not overload electrical circuits.
- تعليمات القطع: The LED strips can be cut for customized length. Only cut along the designated markings to avoid damaging the strip.
- تثبيت: قم دائمًا بفصل الطاقة قبل التثبيت أو الصيانة.
- حرارة: Do not cover the LED strips with materials that may trap heat, as this can cause overheating.
- أطفال: احتفظ بالمنتج ومكوناته بعيدًا عن متناول الأطفال.
محتويات الحزمة
تأكد من وجود جميع المكونات في الحزمة الخاصة بك:
- (2) 16.4ft RGB Flexible LED Light Strips
- (1) مزود الطاقة
- (1) IR Remote Controller (with battery included)
- (20) مقاطع التثبيت
Image: Main product image showing the light strips, remote, power adapter, and clips.
الإعداد والتثبيت
- تحضير السطح: Ensure the installation surface is clean, dry, and smooth for optimal adhesion of the clips.
- توصيل المكونات: Connect the LED light strips to the controller, ensuring the arrows on the connectors align. Then, connect the power supply to the controller.
- وظيفة الاختبار: Before permanent mounting, plug in the power supply and use the remote control to test the light strips. Verify all colors and modes function correctly.
- Customize Length (Optional): If a shorter length is desired, only cut the LED strips along the designated cutting marks (usually indicated by a scissor icon or copper pads). Cutting elsewhere will damage the strip.
- Mount the Strips: Remove the adhesive outer layer from the back of the mounting clips and press firmly for five seconds when mounting. Use the provided clips to secure the light strips in your desired location, such as under cabinets, behind TVs, or along shelves.
- تفعيل التحكم عن بعد: Remove the plastic tab from the remote control's battery door to activate the battery.
Image: Step-by-step diagram illustrating how to connect the light strips, identify cutting points, and mount them using clips.
عملية
The Sylvania RGB Flexible Light Strips are controlled using the included IR remote. Ensure the remote is pointed towards the IR receiver on the controller for optimal response.
وظائف التحكم عن بعد:
- تشغيل/إيقاف: Power the light strips on or off.
- اختيار اللون: اختر من بين 16 لونًا ثابتًا باستخدام أزرار الألوان.
- يعتم: Adjust the brightness of the selected color or dynamic mode.
- الأوضاع الديناميكية: Select from 4 pre-programmed dynamic modes (e.g., Flash, Strobe, Fade, Smooth) to create different lighting effects.
Image: Detailed illustration of the IR remote control, highlighting buttons for power, color selection, dimming, and dynamic modes.
صيانة
- تنظيف: Gently wipe the LED strips with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
- عمر: The LED technology provides a long operational life of up to 30,000 hours under normal use conditions.
- استبدال البطارية عن بعد: If the remote control becomes unresponsive, replace the CR2025 lithium coin cell battery.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الأضواء لا تعمل. | Power connection issue, remote battery dead, IR receiver blocked. | Check all connections (power supply, controller, strips). Ensure arrows on connectors align. Replace remote battery. Ensure remote is pointed at the IR receiver without obstruction. |
| جهاز التحكم عن بعد لا يستجيب. | Remote battery dead, remote too far, IR receiver blocked. | Replace remote battery. Ensure remote is within range and pointed directly at the IR receiver. Remove any obstructions between the remote and receiver. |
| Some sections of the light strip are not lighting up. | Damaged section, incorrect cutting. | Inspect the strip for physical damage. If a section was cut incorrectly, it may be permanently damaged. Ensure connections are secure. |
تحديد
| ميزة | التفاصيل |
|---|---|
| رقم الموديل | 65636 |
| ماركة | ليدفانس (سيلفانيا) |
| لون | RGB (16 colors) + White |
| طول | 32ft (2 x 16.4ft strips) |
| الاستخدام | داخلي فقط |
| المميزات الخاصة | Color Changing, Dimmable, Energy Efficient |
| نوع مصدر الضوء | قاد |
| مصدر الطاقة | كهرباء سلكية |
| نوع وحدة التحكم | جهاز التحكم عن بعد بالأشعة تحت الحمراء |
| المجلدtage | 12 فولت |
| واتtage | 24 واط |
| الاتصال | الأشعة تحت الحمراء |
| مادة | بلاستيك |
| وزن العنصر | 10.88 أونصات |
| عمر | تصل إلى 30,000 ساعة |
| مقاومة الماء | غير مقاوم للماء |
| رمز المنتج الموحد | 046135656361 |
الضمان والدعم
This Sylvania LED Flexible Light Strip Starter Kit is backed by a ضمان الشركة المصنعة لمدة عامين.
For technical support, warranty claims, or additional product information, please visit the official LEDVANCE webالموقع أو الاتصال بقسم خدمة العملاء.
يمكنك أيضًا زيارة متجر LEDVANCE على أمازون لمزيد من المنتجات والمعلومات.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.