مقدمة
This manual provides detailed instructions for the installation, operation, and maintenance of your Yeelight Closet Light YLBGD-0045. This motion sensor wardrobe light is designed to provide convenient and efficient illumination in various indoor spaces. Please read this manual thoroughly before use to ensure proper function and longevity of the product.
محتويات الحزمة
تأكد من وجود جميع المكونات في العبوة:
- Yeelight Closet Light (1 unit)
- Mounting accessories (e.g., magnetic strips, adhesive pads)
- كابل شحن USB Type-C
- دليل المستخدم
Note: The product is typically supplied as a single package containing the light and necessary accessories.
الإعداد والتثبيت
The Yeelight Closet Light features a magnetic design for easy installation and removal, particularly for charging.
- اختيار موقع: Select a clean, dry, and flat surface for installation, such as inside a wardrobe, under kitchen cabinets, or on a bookshelf.
- تحضير السطح: Clean the chosen surface thoroughly to ensure optimal adhesion for the magnetic pads.
- قم بتثبيت الوسادات المغناطيسية: Peel off the protective film from one side of the adhesive magnetic pads and firmly press them onto the desired installation surface.
- جبل النور: Align the magnetic back of the Yeelight Closet Light with the installed magnetic pads. The light will securely attach magnetically.
- التهمة الاولية: Before first use, fully charge the light using the provided USB Type-C cable. The charging indicator will be red during charging and turn off when fully charged.

Image: Magnetic installation of the Yeelight Closet Light. The light can be easily removed for charging.

Image: The Type-C charging port and indicator light. Red indicates charging, light off indicates full charge.
تعليمات التشغيل
The Yeelight Closet Light offers multiple operating modes and adjustable brightness.
اختيار الوضع
Locate the mode switch on the light. Typically, there are three modes:
- AUTO Mode (Motion Sensor): In this mode, the light automatically turns on when motion is detected in a dark environment and turns off after a period of no motion (e.g., 20 seconds). The motion sensor has a detection range of approximately 120 degrees and up to 13 feet.
- Always-ON Mode: يظل الضوء مضاءً باستمرار، بغض النظر عن الحركة أو الإضاءة المحيطة.
- وضع إيقاف التشغيل: تم إطفاء الضوء.

Image: Illustration of the automatic motion sensor light in action, detecting motion within a 120-degree angle and up to 13 feet.
تعتيم مستمر
In Always-ON Mode, you can adjust the brightness of the light:
- ضبط السطوع: Long press the control button to cycle through brightness levels. Release the button when the desired brightness is achieved.

Image: Demonstrates stepless dimming capability, showing the light at various brightness levels (20%, 50%, 100%).
صيانة
Proper maintenance ensures the longevity and optimal performance of your Yeelight Closet Light.
- تنظيف: Wipe the light with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or electronic components.
- العناية بالبطارية: To prolong battery life, avoid fully discharging the light frequently. Recharge the light when the indicator shows low battery.
- تخزين: If storing the light for an extended period, charge it to approximately 50% and store in a cool, dry place. Recharge every few months to prevent deep discharge.
- وسادات لاصقة: If the adhesive pads lose their stickiness over time, replace them with new double-sided adhesive tape suitable for the application.
استكشاف الأخطاء وإصلاحها
If you encounter issues with your Yeelight Closet Light, refer to the following common solutions:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| لا يتم تشغيل الضوء في الوضع التلقائي. | Insufficient darkness; battery low; motion not detected; sensor obstructed. | Ensure the environment is dark enough for the sensor to activate. Charge the light. Check if the sensor is clean and unobstructed. Verify motion is within detection range. |
| الضوء لا يشحن. | Faulty cable; faulty adapter; charging port issue; battery degradation. | Try a different USB Type-C cable and power adapter. Ensure the cable is fully inserted. If the issue persists, the battery may be degraded (refer to warranty). |
| يسقط الضوء من سطح التثبيت. | Adhesive pads lost stickiness; surface not clean. | Clean the mounting surface thoroughly. Replace the adhesive pads with new, strong double-sided tape. |
| لا يمكن تعديل السطوع. | Not in Always-ON mode. | Ensure the light is switched to Always-ON mode before attempting to adjust brightness via long press. |
تحديد
| ميزة | التفاصيل |
|---|---|
| رقم الموديل | يلبج-0045 |
| ماركة | Yeelight |
| لون | أسود |
| درجة حرارة لون الضوء | 4000 كلفن (أبيض محايد) |
| طول | 40 سم |
| عدد مصادر الضوء | 1 |
| وزن العنصر | 8.78 أونصة (حوالي 249 جرامًا) |
| مصدر الطاقة | قابلة لإعادة الشحن (USB Type-C) |
| نطاق مستشعر الحركة | Approx. 120 degrees, up to 13 feet |
| مطلوب التجميع | Yes (minor, mounting) |
معلومات الضمان
The Yeelight Closet Light YLBGD-0045 comes with a manufacturer's warranty.
- فترة الضمان: ضمان المصنع لمدة 2 سنوات.
- التغطية: يغطي هذا الضمان العيوب في المواد والصناعة في ظل الاستخدام العادي.
- الاستثناءات: لا يغطي الضمان الأضرار الناجمة عن سوء الاستخدام أو الحوادث أو التعديل غير المصرح به أو التآكل الطبيعي.
- عملية المطالبة: For warranty claims, please retain your proof of purchase and contact the retailer or Yeelight customer support.
يدعم
For further assistance or inquiries not covered in this manual, please refer to the following:
- الموارد المتاحة على الإنترنت: Visit the official Yeelight website for FAQs, product updates, and additional support documentation.
- خدمة العملاء: Contact Yeelight customer support through their official channels if you require technical assistance or have specific product-related questions.