M-Wave Top Assist 2 Metallic Mounting Stand Instruction Manual

1. المقدمة

This manual provides essential information for the safe and effective use of your M-Wave Top Assist 2 Metallic Mounting Stand. Please read this manual thoroughly before assembly and operation, and retain it for future reference.

The M-Wave Top Assist 2 repair stand is designed for bicycle maintenance and repair tasks. It offers a sturdy and adjustable platform for various types of bicycles, including e-bikes, with a maximum load capacity of 50 kg.

2. معلومات السلامة

احرص دائمًا على مراعاة احتياطات السلامة التالية لمنع الإصابة أو إتلاف المنتج:

• Ensure the stand is placed on a stable, level surface before mounting a bicycle.
• لا تتجاوز الحمولة القصوى 50 كجم.
• Always secure the bicycle firmly in the clamp before performing any work.
• Keep hands and fingers clear of moving parts, especially during height adjustment and clampعمل.
• افحص الحامل بانتظام للتأكد من خلوه من أي علامات تآكل أو تلف أو أجزاء مفكوكة. لا تستخدمه إذا كان تالفاً.
• Keep children and pets away from the work area when the stand is in use.
• Do not use the stand for purposes other than its intended use.

3. محتويات العبوة

تأكد من وجود جميع المكونات في العبوة:

• 1 x M-Wave Top Assist 2 Repair Stand
• دليل التعليمات (هذا المستند)

Image: The M-Wave Top Assist 2 Repair Stand as packaged in its retail box.

4. الإعداد والتجميع

The M-Wave Top Assist 2 is designed for quick setup and folding. Follow these steps for assembly:

1. افتح الساقين: Carefully unfold the base legs until they are fully extended and stable. Ensure the stand rests firmly on the ground.
2. ضبط الارتفاع: Loosen the quick-release lever on the main vertical shaft. Extend the shaft to your desired working height. Securely tighten the quick-release lever to lock the height in place.
   

   Image: The M-Wave Top Assist 2 Repair Stand in its fully assembled and extended position, ready for use.
3. ضبط Clamp زاوية: على البنودamp head can rotate 360 degrees. Loosen the adjustment knob/lever near the clamp head to rotate it to the desired angle for holding your bicycle. Tighten the knob/lever firmly once the angle is set.
   

   الصورة: لقطة مقربة view من clamp mechanism, showing the quick-release and rotation features.

5. تعليمات التشغيل

Using your M-Wave Top Assist 2 stand for bicycle maintenance:

1. افتح عنصر Clamp: Use the quick-release mechanism on the clamp to open the jaws wide enough to accommodate your bicycle's frame tube. The clamp is universally adjustable to various tube diameters.
2. اركب الدراجة: Carefully lift your bicycle and position a suitable part of its frame (e.g., top tube, seat post) into the open jaws of the clamp. Ensure the bicycle is balanced before fully securing.
3. Secure the Bicycle: اغلاق الكلamp jaws firmly around the bicycle frame using the quick-release lever. Ensure the bicycle is held securely and does not wobble. The clamp rotates 360 degrees, allowing optimal positioning for various repair tasks.
4. Perform Maintenance: With the bicycle securely mounted, you can now perform your desired maintenance or repair tasks.
5. Remove the Bicycle: Once finished, loosen the clamp quick-release lever and carefully remove the bicycle from the stand.

6. الصيانة والتخزين

To ensure the longevity and optimal performance of your M-Wave Top Assist 2 stand:

• تنظيف: امسح الحامل بالإعلانamp cloth after use to remove dirt, grease, or debris. Avoid abrasive cleaners.
• تشحيم: Periodically apply a light lubricant to the moving parts, such as the quick-release mechanisms and height adjustment points, to ensure smooth operation.
• تقتيش: Regularly check all bolts, nuts, and quick-release levers to ensure they are tight and secure. Inspect the aluminum frame for any signs of damage or bending.
• تخزين: The stand folds up in seconds for space-saving storage. Store it in a dry, clean environment away from extreme temperatures and direct sunlight.
  

  Image: The M-Wave Top Assist 2 Repair Stand in its compact, folded configuration, ideal for storage or transport.

7. استكشاف الأخطاء وإصلاحها

8. المواصفات

• نموذج: M-Wave Top Assist 2
• رقم الموديل: 881041
• مادة: الألومنيوم
• لون: معدني
• سعة التحميل القصوى: 50 كجم (110 رطل)
• وزن السلعة: 6 كجم تقريبًا (13.2 رطلاً)
• أبعاد المنتج (الطول × العرض × الارتفاع): 39.76 × 8.66 × 6.3 بوصة (مطوي)
• المميزات الخاصة: دوارة 360 درجةamp, Universal Tube Diameter Adjustability, Quick Fold/Setup
• رمز المنتج العالمي: 887539033170

9. الضمان والدعم

For warranty information or technical support regarding your M-Wave Top Assist 2 Metallic Mounting Stand, please contact M-Wave customer service or refer to the official M-Wave webيرجى تجهيز رقم الطراز (881041) وإثبات الشراء عند الاتصال بالدعم.

M-Wave Official Webموقع: www.m-wave.com (ملاحظة: هذا هو عنصر نائب URL لعدم وجود دعم محدد URL (تم توفيرها في بيانات الإدخال.)