LEDVANCE Linear LED Shelf Light 400mm

1. المقدمة

This manual provides essential instructions for the safe installation, operation, and maintenance of your LEDVANCE Linear LED Shelf Light. This versatile lighting solution is designed for various indoor applications, including kitchens, workspaces, and bathrooms (IP44 rated areas). It features a sleek design, uniform light distribution, and a long operational lifespan.

يرجى قراءة هذا الدليل جيداً قبل التثبيت والاحتفاظ به للرجوع إليه مستقبلاً.

2. تعليمات السلامة

• السلامة الكهربائية: يجب أن يتم التركيب بواسطة كهربائي مؤهل أو شخص مختص وفقًا لقوانين ولوائح الكهرباء المحلية. افصل التيار الكهربائي دائمًا من قاطع الدائرة الرئيسي قبل التركيب أو الصيانة أو الإصلاح.
• الاستخدام المقصود: This product is designed for indoor lighting only. Do not use it in outdoor environments or areas not specified in the product description.
• تصنيف IP44: The IP44 rating indicates protection against solid objects larger than 1mm and splashing water from any direction. This makes it suitable for use in bathrooms (Zone 2 and 3) and kitchens, but it is not submersible.
• مصدر الضوء: This product contains a non-replaceable LED light source of energy efficiency class E. Do not attempt to replace the LED module yourself.
• التعامل: Avoid direct contact with the light source when the fixture is powered on, as it may be hot. Do not cover the fixture with insulating material.
• تنظيف: Only clean the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. محتويات العبوة

تأكد من وجود كافة المكونات قبل البدء في التثبيت:

• 1 x LEDVANCE Linear LED Shelf Light (400mm)
• Complete mounting accessories (screws, wall plugs)
• ملحقات التوصيل

4. المواصفات

ملاحظة: المواصفات عرضة للتغيير دون إشعار.

5. الإعداد والتثبيت

The LEDVANCE Linear LED Shelf Light is designed for easy and quick wall mounting. Follow these steps carefully:

1. تحضير منطقة التثبيت: Choose a suitable location for mounting, ensuring it is a dry, stable surface. For bathroom installations, ensure compliance with local wiring regulations for IP44 rated fixtures.
2. فصل الطاقة: Before starting any electrical work, turn off the power supply at the main circuit breaker to prevent electric shock.
3. حدد نقاط الحفر: Hold the fixture against the wall at the desired mounting position. Use a pencil to mark the locations for drilling holes for the mounting brackets. Refer to the product dimensions for accurate placement.

4. ثقوب الحفر: Drill holes at the marked points using an appropriate drill bit for your wall material. Insert the provided wall plugs into the drilled holes.
5. إرفاق تصاعد بين قوسين: Secure the mounting brackets to the wall using the provided screws. Ensure they are firmly attached.
6. التوصيل الكهربائي: Connect the fixture's electrical wires to your household wiring. Follow the wiring diagram provided with the product. Ensure all connections are secure and insulated. This fixture is designed for AC power.
7. تركيب التركيبات: Carefully attach the LED shelf light to the installed mounting brackets. Ensure it clicks securely into place.
8. اعادة الطاقة: Once the fixture is securely mounted and wired, restore power at the main circuit breaker.

6. تعليمات التشغيل

This LED shelf light is equipped with an integrated PIR motion detector and a daylight sensor for automatic operation.

• عملية تلقائية: The light will automatically turn on when motion is detected within its range and ambient light levels are below a certain threshold (daylight sensor).
• الإغلاق التلقائي: The light will automatically turn off after a period of no motion detection, or when sufficient ambient light is present.
• وضع الاستشعار: Ensure the motion sensor is not obstructed to allow for optimal detection. Avoid placing the fixture near heat sources or in direct sunlight, which could interfere with sensor performance.

7. الصيانة

The LEDVANCE Linear LED Shelf Light requires minimal maintenance.

• تنظيف: To clean the fixture, ensure the power is off. Wipe the surface with a soft, dry, or slightly damp قطعة قماش. لا تستخدم مواد كيميائية قاسية أو منظفات كاشطة أو بخاخات مباشرة على التركيب.
• تقتيش: Periodically inspect the fixture and wiring for any signs of damage or wear. If any damage is observed, disconnect power immediately and consult a qualified technician.
• مصدر الضوء: The LED light source is integrated and not user-replaceable. If the light source fails, the entire fixture must be replaced.

8. استكشاف الأخطاء وإصلاحها

If you encounter issues with your LEDVANCE Linear LED Shelf Light, refer to the following common problems and solutions:

• الضوء لا يضيء:
  • تأكد من توصيل مصدر الطاقة وأن قاطع الدائرة الكهربائية قيد التشغيل.
  • Ensure the wiring connections are secure.
  • Verify that the ambient light is low enough for the daylight sensor to activate the light.
  • Check if motion is being detected by the PIR sensor.
• Light Stays On Continuously:
  • تأكد من عدم وجود حركة مستمرة ضمن نطاق كشف المستشعر.
  • Check if the daylight sensor is being obstructed or if it's in a consistently dark area.
• Light Flashes or Flickers:
  • Disconnect power and check all electrical connections for looseness or damage.
  • تأكد من مستوى الصوتtage supply is stable and within the specified range (240V).

إذا لم تُحل المشكلة باتباع هذه الخطوات، فاتصل بدعم العملاء.

9. الضمان والدعم

This LEDVANCE Linear LED Shelf Light comes with a ضمان لمدة سنتين من تاريخ الشراء، بما في ذلك تغطية عيوب المواد والصناعة في ظل الاستخدام العادي.

For warranty claims, technical support, or further assistance, please contact LEDVANCE customer service through their official webالموقع الإلكتروني أو المتجر الذي تم شراء المنتج منه. يرجى تجهيز إثبات الشراء ورقم طراز المنتج.