iMaihom 130W LED Flood Light (Model BDD130D-3) Instruction Manual

المنتج انتهىview

The iMaihom 130W LED Flood Light (Model BDD130D-3) is designed for outdoor illumination, featuring a dusk-to-dawn photocell sensor and three adjustable light heads. This unit provides high brightness and is built for durability in various weather conditions.

• عالية السطوع: Equipped with 154 high-quality LED chips, producing up to 13000 lumens.
• وظيفة من الغسق إلى الفجر: Built-in sensitive photocell sensor automatically turns the light on at nightfall and off at daybreak.
• رؤوس قابلة للتعديل: Three light heads can be rotated to different angles, covering a wide lighting area up to 1850 sq. ft.
• بناء متين: IP65 waterproof rating and full aluminum body ensure resistance to rain, sleet, snow, and efficient heat dissipation.

ماذا يوجد في الصندوق

تأكد من وجود كافة المكونات قبل البدء في التثبيت.

• iMaihom 130W LED Flood Light Unit
• Black Silicone Cap (for switch-controlled mode)
• Mounting Hardware (screws, anchors, wire nuts)

الإعداد والتثبيت

This flood light is designed for hardwired installation to a junction box. Ensure power is turned off at the circuit breaker before beginning installation.

خطوات التثبيت:

1. إعداد سطح التركيب: Identify a suitable junction box location on a wall or under eaves/soffits. Ensure the junction box is waterproof for outdoor use.
2. قم بتثبيت لوحة التثبيت: قم بتأمين لوحة التثبيت على صندوق الوصلات باستخدام البراغي المتوفرة.
3. وصلات الأسلاك: Connect the flood light's wires to your household wiring:
   • Black wire (Live) to Black wire
   • White wire (Neutral) to White wire
   • Green/Yellow wire (Ground) to Green/Ground wire
   Use the provided wire nuts to secure connections.
4. تركيب وحدة الإضاءة: Align the flood light fixture with the mounting plate and secure it with the central screw.
5. Seal the Fixture: Ensure the gasket is properly seated to maintain the IP65 waterproof rating.
6. ضبط رؤوس الضوء: Loosen the screws on the side of each light head to adjust their angle as needed. Tighten screws to secure the position.
7. اعادة الطاقة: قم بتشغيل الطاقة عند قاطع الدائرة.

Figure 1: Hardwired Installation Steps. Shows the three steps for connecting the light to a junction box.

Figure 2: Eave and Wall Installation Examples. Demonstrates the versatility of mounting options.

Figure 3: Adjustable Heads and Photocell. Illustrates the rotational capability of the light heads and the location of the photocell.

أوضاع التشغيل

The iMaihom 130W LED Flood Light offers two operating modes:

1. Dusk-to-Dawn Mode (Default)

In this mode, the built-in photocell sensor automatically detects ambient light levels. The light will turn on when it gets dark (nightfall) and turn off when it gets bright (daybreak).

• No manual intervention required.
• Energy efficient operation.

Figure 4: Dusk-to-Dawn Operation. The light automatically activates at dusk and deactivates at dawn.

2. Switch-Controlled Mode

To operate the light manually via a wall switch, cover the photocell sensor with the provided black silicone cap. This disables the automatic dusk-to-dawn function, allowing you to control the light with your existing wall switch.

• Allows manual ON/OFF control.
• Ideal for situations where continuous lighting is not desired or specific timing is needed.

Figure 5: Switching to Manual Control. Instructions for using the black silicone cap to enable switch-controlled operation.

صيانة

The iMaihom 130W LED Flood Light requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

• تنظيف: نظّف رؤوس الإضاءة ومستشعر الخلية الضوئية بشكل دوري باستخدام قطعة قماش ناعمة.amp استخدم قطعة قماش لإزالة الأوساخ والغبار والشوائب. لا تستخدم المنظفات الكاشطة أو المذيبات.
• تقتيش: Regularly inspect the wiring and mounting for any signs of wear, damage, or loose connections. Address any issues promptly.
• Photocell Obstruction: Ensure the photocell sensor is not obstructed by leaves, dirt, or other objects, as this can interfere with its automatic operation.

استكشاف الأخطاء وإصلاحها

تحديد

الضمان والدعم

The iMaihom 130W LED Flood Light (Model BDD130D-3) comes with a ضمان لمدة 2 سنوات from the manufacturer. For technical support, warranty claims, or further assistance, please contact iMaihom customer service through their official webالموقع أو بائع التجزئة الذي تم شراء المنتج منه.

For more information about iMaihom products, visit the iMaihom Store on Amazon.

فيديوهات المنتج