هوفر FH14050

Hoover CleanSlate Plus Portable Carpet + Upholstery Spot Cleaner

Model: FH14050 | Brand: Hoover

مقدمة

The Hoover CleanSlate Upholstery & Carpet Spot Cleaner is designed for permanently removing stains and messes with powerful suction and versatile tools. Its light, portable design and long cord make it ideal for cleaning spills and stains on the go. The machine features a 7" WidePath tool for large areas and a TightSpot tool for crevices. The integrated Hose Rinse tool ensures the machine stays clean and ready for its next use.

ماذا يوجد في الصندوق

Your Hoover CleanSlate Plus package includes the following components:

  • Hoover CleanSlate Plus Portable Carpet + Upholstery Spot Cleaner Machine
  • 7" WidePath Tool
  • TightSpot Tool
  • أداة شطف الخرطوم
  • Trial Oxy Cleaning Solution
Hoover CleanSlate Plus components including the main unit, 7-inch WidePath tool, TightSpot tool, hose rinse tool, and a bottle of cleaning solution.

Figure 1: All components included with the Hoover CleanSlate Plus.

يثبت

1. ملء خزان المياه النظيفة

Remove the clean water tank from the unit. Unscrew the cap and fill the tank with water up to the indicated line. Add the appropriate amount of Hoover cleaning solution based on the area size (small or large). Securely screw the cap back on and reinsert the tank into the machine until it clicks into place.

A person filling the clean water tank of the Hoover CleanSlate Plus with water and cleaning solution.

Figure 2: Filling the clean water tank with solution and water.

2. Attaching Cleaning Tools

Select the appropriate cleaning tool (7" WidePath or TightSpot) for your task. Attach the tool securely to the end of the hose until it locks into position.

A hand attaching the 7-inch WidePath tool to the end of the Hoover CleanSlate Plus hose.

Figure 3: Attaching the 7" WidePath tool to the hose.

تشغيل المنظف

Plug the machine into a power outlet. Press the power button located on the top handle to turn the unit on. The machine is now ready for use.

Hoover CleanSlate Plus machine with hose and tools, ready for use.

Figure 4: Hoover CleanSlate Plus ready for operation.

Cleaning Process: Spray, Scrub, Suction

To clean, hold the tool over the stained area. Press the trigger on the tool to spray cleaning solution onto the stain. Release the trigger and scrub the area with the tool's bristles. Then, tilt the tool to engage the suction and pull it across the wet area to extract the dirty solution. Repeat as necessary until the stain is removed.

Three images showing the spray, scrub, and suction steps of cleaning with the Hoover CleanSlate Plus.

Figure 5: The three-step cleaning process: Spray, Scrub, Suction.

Video 1: Demonstrating the powerful cleaning action of the Hoover CleanSlate Plus on upholstery.

الفيديو 2: انتهىview of the portable spot, carpet, and car cleaning capabilities, including pet stain removal.

فيديو 3: شرح مفصلview عرضasing the effectiveness of the Hoover CleanSlate Carpet Cleaner.

Video 4: Comprehensive demonstration of the cleaner's features and performance.

صيانة

1. تفريغ وتنظيف خزان المياه المتسخة

After each use, remove the dirty water tank by pressing the release button and tilting it out. Open the lid and carefully pour out the dirty water. Rinse the tank thoroughly with clean water and allow it to air dry before reassembling.

2. Using the Hose Rinse Tool

To prevent clogs and maintain optimal performance, use the hose rinse tool after each cleaning session. Attach the hose rinse tool to the end of the hose. Turn on the machine and press the trigger to circulate clean water through the hose, flushing out any remaining debris. Continue until the water runs clear.

A hand holding the hose rinse tool attached to the Hoover CleanSlate Plus hose, with water flowing through it.

Figure 6: Using the hose rinse tool for self-cleaning convenience.

استكشاف الأخطاء وإصلاحها

مشكلةالسبب المحتملحل
لا شفطDirty water tank full or improperly seated; Suction path clogged; Hose not properly connected.Empty and re-seat dirty water tank; Check and clear any clogs in the hose or suction path; Ensure hose is securely connected to the unit.
لا يوجد رذاذClean water tank empty or improperly seated; Spray nozzle clogged; Trigger not pressed.Fill and re-seat clean water tank; Clear any debris from the spray nozzle; Ensure trigger is fully pressed during operation.
الجهاز لا يعملNot plugged in; Power button not pressed correctly.Ensure unit is securely plugged into a working outlet; Press the power button firmly.

تحديد

ميزةالتفاصيل
ماركةهوفر
اسم الموديلCleanSlate Plus Carpet & Upholstery Spot Cleaner
رقم الموديلف.هـ14050
أسلوبCleanSlate Plus
لونأبيض
مصدر الطاقةكهرباء سلكية
سعة1.18 Liters (40 oz clean solution)
وزن العنصر5.85 كيلوجرام (12.87 رطل)
أبعاد المنتج14 بوصة عمق × 10.5 بوصة عرض × 13 بوصة ارتفاع
بلد المنشأالصين

الضمان والدعم

This product comes with a standard manufacturer's warranty. For detailed warranty information, troubleshooting, and customer support, please refer to the official user manual.

يمكنك تنزيل دليل المستخدم الكامل (ملف PDF) هنا.

© 2025 هوفر. جميع الحقوق محفوظة.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.