NEO Z-Wave Plus Siren Alarm NAS-AB02ZU-G User Manual

1. المقدمة

The NEO Z-Wave Plus Siren Alarm is an intelligent device designed to enhance home security and automation systems. It integrates with Z-Wave controller gateways to provide audible alarms and visual strobe alerts in response to various home events. This device can associate with other Z-Wave notification sensors, such as motion sensors, door/window sensors, water leakage sensors, and smoke sensors, to trigger alerts.

Ensure your Z-Wave controller supports Z-Wave Plus devices for optimal functionality.

2. انتهى المنتجview

The NEO Z-Wave Plus Siren Alarm combines audio and visual alerts with flexible power options and smart home integration capabilities.

الشكل 1: أمام view of the NEO Z-Wave Plus Siren Alarm, showcasing its compact design with a central speaker grille and a blue LED ring.

الشكل 2: Diagram illustrating key features including high-dB ringing, flashing alarm, trigger alarm, push notification support, Micro-USB power, and unique appearance.

3. المميزات

• Audio & Visual Alerts: Provides distinct chimes and alarms accompanied by a flashing red LED for various home events.
• مصدر طاقة مزدوج: Supports both battery power (2 CR123A batteries, included) and USB charging (6V, 0.5A). The device reports low power when voltage بين 4.5V و 6V.
• Customizable Schedules: Allows for the creation of daily audio schedules for reminders or notifications.
• Emergency Integration: Connects with other Z-Wave safety devices to provide immediate alerts for events like broken glass, unlocked safes, smoke detection, or floods.
• Adjustable Configurations: Advanced parameters enable control over alarm duration, volume, and tone. Custom code may be required for full functionality with SmartThings.
• تقنية زي ويف بلس: Offers improved battery consumption, extended signal range, and enhanced connectivity. Compatible with SmartThings (refer to setup for details).

الشكل 3: The siren alarm's compact size, shown held in a hand, highlighting its small and portable design.

الشكل 4: Illustration demonstrating the 100dB loud alarm capability of the device, with sound waves emanating from it.

4. المواصفات

5. الإعداد

5.1 تشغيل الجهاز

The siren alarm can be powered using two methods:

1. طاقة البطارية: Insert the two included CR123A batteries into the battery compartment. Ensure correct polarity.
2. طاقة USB: Connect a Micro-USB cable (not included) to the device and a 6V, 0.5A USB power adapter (not included).

The device will report low power when the battery voltage drops between 4.5V and 6V.

الشكل 5: The siren alarm connected via USB power, illustrating the dual power supply options (USB and battery).

5.2 تضمين شبكة Z-Wave (الاقتران)

To integrate the siren alarm into your Z-Wave network:

1. Place your Z-Wave controller or gateway into inclusion/pairing mode. Refer to your controller's manual for specific instructions.
2. Follow the device-specific instructions (usually a button press sequence) to put the siren alarm into pairing mode.
3. Once successfully paired, the siren alarm will appear in your Z-Wave controller's device list.

Important Compatibility Note for SmartThings Users:

• The NEO Z-Wave Plus Siren Alarm is designed to work with SmartThings.
• For access to all advanced features, including customizable chimes, volume, and tone adjustments, the SmartThings Classic app and a custom device handler (DTH) are required.
• The newer SmartThings app and Edge platform may not fully support all advanced features without a compatible DTH, which may no longer be manually addable. The device may function as a basic siren in these newer environments.
• هذا الجهاز هو غير متوافق with Wink, Ring, Iris, or certain alarm panels like Vivint (unless custom actions are configured on the panel, which is not officially supported by NEO).

6. تعليمات التشغيل

Once successfully paired with your Z-Wave gateway, the siren alarm can be controlled and configured through your Z-Wave controller's interface or associated smart home application.

6.1 Triggering Alarms and Chimes

The siren alarm can be triggered by various events configured within your Z-Wave network. This typically involves:

• Association with Sensors: Link the siren alarm to other Z-Wave sensors (e.g., motion, door/window, smoke, water leak) so that when a sensor is triggered, the siren activates.
• تفعيل المشهد: Include the siren alarm in smart home scenes or routines that activate under specific conditions (e.g.,

  Ask a question about this manual

  Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

  اسم بريد إلكتروني

  سؤال تفاصيل Submit question