1. المقدمة
This manual provides essential information for the safe and efficient use of your EMITEVER 24V Power Supply. Please read this manual thoroughly before installation and operation, and retain it for future reference.
1.1 محتويات العبوة
- 1 x 60W DC Power Supply
1.2 المنتج أكثرview
The EMITEVER 24V Power Supply is a UL-Listed 60W LED power adapter designed to convert 100-240V AC input to a stable 24V DC output at 2.5A. It is suitable for various low-voltage applications, including LED strip lights, CCTV cameras, and other 24V devices requiring up to 60 watts of power.
Image 1.1: The EMITEVER 24V 60W LED Power Adapter, including the main unit, AC power cord, and a DC connector adapter.
2. معلومات السلامة
2.1 تعليمات السلامة الهامة
- Ensure your device operates at 24V and requires under 60W to prevent damage, flickering, or overheating.
- This power supply does not have charging or dimming functions. For dimming, use an external PWM controller at the DC end.
- The product has an IP30 rating, making it suitable for dry indoor environments only. Avoid exposure to moisture or water.
- لا تفتح مصدر الطاقةasinز. لا توجد أجزاء قابلة للصيانة من قبل المستخدم بالداخل.
- يحفظ بعيدًا عن متناول الأطفال.
- افصل الطاقة قبل إجراء أي توصيلات أو فصل.
2.2 UL Certified Protection
This 24V Power Adapter is cUL Listed, indicating compliance with rigorous safety standards. It incorporates comprehensive protection mechanisms to ensure device safety and longevity:
- حماية التيار الزائد: يمنع حدوث أضرار ناتجة عن سحب تيار كهربائي زائد.
- حماية من الدوائر القصيرة: Automatically shuts off power in case of a short circuit.
- حماية من الحرارة الزائدة: Prevents the adapter from reaching unsafe temperatures.
Image 2.1: Internal component comparison illustrating the quality and safety features, including UL certification, of the EMITEVER power supply.
3. المواصفات
| ميزة | التفاصيل |
|---|---|
| حجم الإدخالtage | 100-240V AC |
| تردد الإدخال | 50/60 هرتز |
| حجم الإخراجtage | 24V DC (Constant Voltage) |
| ماكس الانتاج الحالي | 2.5 Amps |
| الحد الأقصى لقوة الإخراج | 60 واط |
| DC Jack Size | 5.5 x 2.1mm (Inner Positive, Outer Negative) |
| تصنيف IP | IP30 (الاستخدام الداخلي فقط) |
| أبعاد المنتج | 4.7 بوصة عمق × 2.1 بوصة عرض × 1.2 بوصة ارتفاع (11.9 سم × 5.3 سم × 3.0 سم) |
| وزن | 10.55 أونصة (حوالي 300 جرامًا) |
| مصدر الطاقة | كهرباء سلكية |
| نوع التركيب | Wall Mount (via AC plug) |
| الشهادات | cUL المدرجه |
Image 3.1: Physical dimensions and cable lengths of the EMITEVER 24V 60W power supply.
4. الإعداد والتثبيت
4.1 قبل التثبيت
- Verify that your device requires a 24V DC power input.
- تأكد من أن إجمالي الماءtage required by your connected devices does not exceed 60W.
- Ensure the installation environment is dry and free from moisture.
4.2 طرق الاتصال
The EMITEVER 24V Power Supply offers two primary methods for connecting to your devices:
- Direct DC Jack Connection:
Connect the power supply's DC output plug (5.5 x 2.1mm) directly into a compatible DC input jack on your device. This is a plug-and-play method requiring no additional wiring. - اتصال الكتلة الطرفية:
For devices that require bare wire connections, use the included DC connector to terminal block adapter. Loosen the screws on the terminal block, insert the positive and negative wires from your device, and then tighten the screws. Ensure correct polarity (Inner Positive, Outer Negative for the DC jack).
Image 4.1: Visual guide to the two available connection methods for the power supply.
الصورة 4.2: تفصيلية view of the 5.5 x 2.1mm DC output size and polarity.
4.3 التوافق
This power supply is compatible with a wide range of 24V DC devices that require up to 60 watts of power, including but not limited to:
- EMITEVER LED strip lights, modules, light bars, and cabinet lights
- إضاءة المناظر الطبيعية
- أجهزة التوجيه اللاسلكية
- Small 3D printers
- كاميرات المراقبة
- Other 24V devices under 60 watts
5. تعليمات التشغيل
After ensuring all connections are secure and correct, plug the AC power cord into a standard 100-240V wall outlet. The power supply will begin to deliver 24V DC power to the connected device. A green indicator light on the adapter will illuminate when power is active.
The start-up time for the power supply can take 1-3 seconds to stabilize the output and extend its operational life. No further user interaction is required for basic operation.
Image 5.1: The power supply in operation, providing stable power to an LED strip light.
6. الصيانة
- تنظيف: Disconnect the power supply from the wall outlet and all connected devices before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or sprays.
- تخزين: Store the power supply in a cool, dry place away from direct sunlight and moisture when not in use.
- تقتيش: Periodically inspect the power cords and the adapter casing for any signs of damage. If damage is found, discontinue use and replace the unit.
7. استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| Device not lighting up / No power | حجم غير صحيحtage (not 24V) جهاز واتtage exceeds 60W اتصال فضفاض منفذ معيب فشل في مصدر الطاقة | Verify device voltagه و واتtagالمتطلبات. تحقق من أن جميع التوصيلات آمنة. اختبار منفذ الحائط بجهاز آخر. Replace the power supply if it's faulty. |
| أضواء متقطعة | جهاز واتtage exceeds 60W اتصال فضفاض جهاز غير متوافق | ضمان إجمالي واتtage أقل من 60 واط. التحقق من التوصيلات. Confirm device compatibility with a 24V constant voltagالعرض ه. |
| Power supply is hot | Overload (device wattagه عالية جدا) تهوية سيئة | Reduce load to under 60W. Ensure adequate airflow around the power supply. If overheating persists, discontinue use. |
| Green indicator light not on | لا يوجد مصدر طاقة تيار متردد خطأ داخلي | Check AC power cord connection and wall outlet. If power is present at the outlet, the power supply may be faulty and require replacement. |
8. الضمان والدعم
EMITEVER provides a 3-year worry-free service for this product. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.
For warranty claims or technical support, please contact EMITEVER customer service through the retailer where the product was purchased or visit the official EMITEVER webموقع لمعلومات الاتصال.